Is it possible to run multiple SSL enabled sites (each having it's own SSL certificate) off of one IP address, or do I need a separate IP for each one? Any links to conclusive web pages.
View 3 RepliesI'm hosting a Sendmail Cyrus-Imap server on fedora 12. I recently installed a second NIC on a second internet gateway and successfully configured source based routing. Clients are able to connect over the mail.domain.com received from the gateway 192.168.0.1 to the interface 192.168.0.254. ETH0. Clients are also able to connect from pop3.domain.com and smtp.domain.com from the second gateway 192.168.1.1 to the interface 192.168.1.254. ETH1
I have cyrus-imap certs configured for the mail.domain.com and a Sendmial cert configured for mail.domain.com. My question is how would I tell sendmail and cyrus that the mail.domain.com goes out the ETH0 but deliver the second and third cert (eg cyrus sends pop3.domain.com and sendmail sends smtp.domain.com) to clients connected on ETH1?
I'm trying to set up a 2nd SSL cert on a different domain on a server, each domain has its own IP address, the problem is the Web developer that configured the first domain specified ssl keys for the primary domain in both the vhost config in httpd.conf AND in the ssl.conf config files. If I attempt to remove the keys form ssl.conf the server will not start up. and with them there It will not start up if I specify keys for the secondary domain.
ssl.conf
Code:
LoadModule ssl_module modules/mod_ssl.so
SSLCertificateFile /etc/pki/tls/certs/primary.com.crt
SSLCertificateKeyFile /etc/pki/tls/certs/primary.com.key
SSLCertificateChainFile /etc/pki/tls/certs/primary_gd_bundle.crt
Getting connection reset or time out when trying to rdesktop to a Win2003 server that has been upgraded to use SSL for server authentication. (See [URL]). Works fine connecting to other Win2003 servers, just not the secured ones. I'm using Rdesktop version 1.6.0 on Linux Fedora and also SUSE. To connect to the secure servers, Windows clients use the updated RDP client - version 5.2. As a workaround, I attempted to set up an SSL tunnel for rdesktop but wasn't successful in connecting through that either:
ssh username@10.10.10.10 -L 1024:winserver.work.org:3389
rdesktop localhost:1024
Has anyone been able to use rdesktop to connect to a win server that has been configured to use SSL server authentication for RDP connections?
I have to run multiple instances of apache on the same physical machine, as we have different OAM policies for different domains.is in the httpd.conf file can I have ServerName same in two instances of apache, like
ServerName: prod_machine (actual machine name)
In the vhconf files I do have different servernames for virtual hosts. Apache instances are running on same IP but different ports. I am including various vhost files in the main httpd.conf file. Can I skip servername in the main httpd.conf file and include different servernames in the virutal hosts configs. OS: Solaris10
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info:
monitored server:
CentOS 5.3 2.6.18-128.1.1.el5
[code]....
While revoking OpenVpn client certs from Server I am getting following output:
./revoke-full client-xxxxxxx
Using configuration from /etc/openvpn/openvpn-2.0.9/easy-rsa/openssl.cnf
ERROR:Already revoked, serial number 2D
[code]....
Any one have an idea How to clear apache cache without restarting apache server.
View 5 Replies View RelatedI am upgrading my server and I have a lot of sites. Since I cannot take my server down for a few days, maybe a week until I manage to migrate all the sites to the new machine, I figured I could migrate them one by one. After migrating one, I would somehow tunnel the requests of that name virtual host to my internal machine. When everything is migrated, I would then switch the machines, update ip's and stuff and everything will work just fine.
However I cannot seem to find a way to do this tunneling. is this at all possible? If not, what alternatives do I have?
i'm trying to create a server certificate to used in PEAP authentication .I have installed freeradius on fedora10, openssl-perl , also upgrade all the packages yum upgrade
Now after changing the configuration of openssl.cnf file placed in /etc/pki/tls/openssl.cnf
I am looking for certs.sh file thats comes with freeradius package. and also CA.all & CA.certs file but i couldn't find these files in filesystem .
Is these files are present by default when freeradius and openssl-perl packages were installed or should i have to install or copy these scripts file as these files are necessary to create a certificate for server side.
I am considering getting certified in Linux Administration.
1) Which organization is best for getting certified?
2) Which books are the best?
3) What topics should one focus on?
AND (the big daddy)
4) Is it worth it to get certified if one does not have a computer science degree and wants to break in to IT?
I read that since httpd 2.2.12 (I run 2.2.15), it is now possible to run multiple SSL certs on multiple vhosts on one ip. I didn't find a procedure to do it. Do you know how to?
View 1 Replies View RelatedI have several sites running on a local server. Currently, they're all running on port 80. I need one particular site (and ONLY that site) to also accept connections on port 81.
If I browse to the server IP x.x.x.x:80 directly, Apache's behaviour of showing the default site should work as usual. But, if I browse to IP x.x.x.x:81, it should show a different site (the one that should be accepting both :80 and :81). This part is very important.
I was hoping something like the following would work, but it didn't Currently x.x.x.x:81 still shows what I've called myport80defaultsite.com below.
Code:
Listen 80
Listen 81
<VirtualHost *:80>
ServerName myport80defaultsite.com
[Code].....
how is it possible to serve multiple sites hosted in my computer with apache through dyndns.I am using ubuntu 10.04 and i had setup a dyndns domain as of mydomain.homelinux.org/127.0.1.1 medic. Now when i go to mydomain. homelinux.org outside of my lan i see the default site of apache.
View 3 Replies View RelatedI am having a problem with apache's virtualhost directive hosting multiple domains on a single IP with Apache 2.2 on Fedora 11. For example i have domaina.com and domainab.com pointing to the same IP address and have my httpd.conf configured like so:
NameVirtualHost *:80
<VirtualHost *:80>
DocumentRoot /www/domainA
[code]....
The problem is when i navigate to either domaina.com or domainb.com i get the default Apache page. Its like it is only accepting the default DocumentRoot directive.
How to give mulitple virtual host in apache. I want to access all my sites with ip 192.168.1.125
For ex :if i want to access dpm.net it should have the ip 192.168.1.230 with port 80 & for persur.net it should have the same ip 192.168.1.230 with port 80
After restarting the apache servers.I am unable to run both the applications in a single time.
For that i gave Include /etc/apache2/sites-enabled/[^.#]* in apache2.conf. But still its not working.
Firefox 3.6.12 on Ubuntu 10.10 on my desktop computer is reporting a "this connection is untrusted" error for sites that have security certificates provided by COMODO. Yet, the same sites work fine in Firefox 3.6.x on Windows XP, or Chromium in Ubuntu. Here is the more specific message: "The certificate is not trusted because the issuer certificate is unknown.
(Error code: sec_error_unknown_issuer)" The issuer is listed as "COMODO High Assurance Secure Server CA." Here are some examples that throw this error for me:[URL]... It appears that there was some controversy with COMODO and Mozilla (due to bad behavior by COMODO) in the past, but all I can find on that indicates that this should be not an issue any longer.
Anybody with ideas?
I will be doing actual development and testing on the same machine as the server. It is a single user machine in the sense that I will be the only one working on the machine. There will be multiple hosted languages, specifically PHP and RoR while possibly expanding later. I'd like the setup to translate well to a production environment. With those 3 things in mind there are a couple of things I've had in the back of mind.Seeing as it's a single user machine I haven't been able to decide whether or not I should be working on things out of my home directory or if they should be located outside of it.I'm feeling that outside of a user directory would be better as it would translate better to a production environment, but I'm also not sure if that will come with any permission annoyances or concerns seeing as I'll be working on the same machine. Hosting multiple languages seems like it may be a bit quirky. With PHP I've found you're generally just dumping the project somewhere in the document root where as something like a Rails app you have the entire project and you only want the public directory in the document root.
View 1 Replies View RelatedI'm looking at setting up a couple automated systems: Here are a few examples:
* Internal accounting system to download and process emails
* Public web server to visit
I could put each system on its own separate box -- for example, it's generally good practice to separate anything that external users have access to (such as a webserver) from internal processes such as accounting. Now, rather than dishing out the money for two separate servers, could I get away with just installing new instances of VMWare on the same box for each system?
To give you an idea, these are not large scale computationally sensitive systems. The accounting one is simply downloading and tallying emails, and the latter is just a webserver with maybe 5 hits per day on a good day. I could definitely pick up a new box for say $50, but I wanted to know the general practice of using VMWare on the same box versus two separate boxes.
I have a server that host's several sites, recently I had to create a new server because the old one isn't good enough for me. Ive installed apache2 on the new server and moved all the files from one server to the other. I'm making tests in my local lan so I've edited my computer's hosts file to point to the name of each site to the local ip of the new server:
192.168.1.85 www.mypage.com
192.168.1.85 svn.mypage.com
192.168.1.85 trac.mypage.com
I have all the site definition files in /etc/apache2/sites-available I also have the used a2ensite to enable each page.
Whenever o use my browser to try and access each of the sites I always get the svn.mypage.com page and none of the others.
here is some debug info:
Code:
sudo apache2ctl -S
VirtualHost configuration:
wildcard NameVirtualHosts and _default_ servers:
[Code]....
how one professionaly would solve the security and administration for the multiple webadmins, but firstly I give some general information.I spent 2 days searching and there are alot of good guides but I dont see my specific questions answered, not so I can understand them atleast.I have Ubuntu 10.10 64bit server edition installed.I am educating myself and am new to linux but use vmware and have installed Gentoo multiple times and a copy of Ubuntu server. This server is going to be setup on the 64-bit 10.10 Ubuntu virtual machine.
View 3 Replies View RelatedI am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
I'm running a linux cloud server with the following config
1.2ghz Processor allocation
752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
Httpd.conf
Timeout 20
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
code....
have to create a webhost on an running fedora server which runs multiple webpages + a coldfusion serveri have to add an coldfusion virtual host to these.what i would do:*crate a new user & group*enter vhosts.conf and copy an existing host and modify it for the new one.*create an new folder and copy the main files (phpstarter and webroot) *chown the files for the right useri think an apache graceful would be needet
View 1 Replies View RelatedHave extensively Googled and searched on here, but with no success. We have a MYPC service at our company, but our support staff have been well trained in the phrase..."we do not offer support for Linux", but the MYPC service that we have did work recently under Ubuntu 9.04 that I had at home, however since upgrading both my laptop and desktop to 10.10 and 10.4 respectively, neither now work when I use the Citrix 11 Receiver client.
I get; "You have not chosen to trust "GeoTrust Global CA", the issuer of the server's security certificate (SSL error 61." So I got, what I thought were the relevant certificates from [URL].. tes/index.html (see image for a list of certificates) but still no joy. whilst I don't want to call my support department, I wonder if they have taken a conscious decision to block access to the MYPC system from anything other than Windows OSs?
Does anyone have some material about statistics using ubuntu / linux server, or a text which generally describes the ubuntu server?I need urgent, i'm writing specialization work about administration apache and ftp server on ubuntu 10:10 server, so I need something for the conclusion.
View 7 Replies View RelatedI try to config my apache server to list all my files: c/c++, php, java files, like the txt file on my server,
e.g /var/www/mydomain/pub
i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name,
if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file,
Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
config my apache server to list all my files: c/c++, php, java files, like the txt file on my server, e.g /var/www/mydomain/pub i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name, if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file, Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
View 1 Replies View RelatedI and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
I have install Mandriva 2009 and install apache server but its not strating on default configuration file . What I should do for starting apache . i have tried /etc/init.d/httpd start but apache is not running .
View 1 Replies View Related