I'm under CentOS 5.2 with PHP 5.2.10 I compiled PHP from Source with ./configure --with-config-file-scan-dir=/etc/php.d but PHP doesn't start modules A PHPInfo says:
Scan this dir for additional .ini files (none)
additional .ini files parsed (none)
routes are correctly setted and the user have permissions for read the directory, just to be sure i changed the CHMOD to 777 but nothing.
this might not be a Centos related issue, but since I'm using Centos I guess it doesn't hurt to ask; I've used Ubuntu before and haven't encountered this. So, I've just installed Centos and Webmin and now I'm trying to configure the server. Problem is that on the Apache configuration page I don't have the option (should be there) to configure the Apache modules. I've attached a file to show where the modules option should (as before) appeared.
View 6 Replies View Relatedi have a server program which accept multiple client connection and am using polling. like every 2 secs it will look to client whether any data is received after it binded. i have used setitimer but there is runtime error i got.. the server accept all client connection but doesn't execute any msg which client sent.
#include<stdio.h>
#include<stdlib.h>
#include<sys/socket.h>
#include<sys/types.h>
#include<netdb.h>
#include<unistd.h>
#include<pthread.h>
#include<string.h>
[Code]....
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
When I SSH another machine and try to execute some GUI app, it does. But when I try to execute some app as root on a remote PC, it doesn't do and says:Code:X11 connection rejected because of wrong authentication.some-GUI-app]: Cannot open display:How do I make it work?
View 5 Replies View RelatedI want set up VPN on my VPS but when i try to turn on tun/tap i see:
:/lib/modules# modprobe tun
FATAL: Could not load /lib/modules/2.6.18-194.17.1.el5.028stab070.7PAE/modules.dep: No such file or directory
os : debian 5
(folder lib/modules is empty)
I downloaded a program called tonespace http://www.mucoder.net/en/tonespace/ which I extracted and then tried to execute the executable file with ./tonespace. This gives me the following message:
bash: ./tonespace: No such file or directory
When I use the command: file ./tonespace I get this: tonespace: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.15, stripped
I dont get it. The file is clearly there, yet when trying to execute it bash doesn't seem to recognize it.
It has permissions rwxr-xr-x and is not owned by root. Am I overlooking something?
I've been trying to load my pcmcia network card driver "xirc2ps_cs" at startup with no success. I have added "modprobe xirc2ps_cs" to the rc.modules file but it doesn't load at startup. Curiously, though, if I execute rc.modules AFTER the machine has booted it will load the modules just fine. Just not during the boot up process. Thinking that hotstart might have been causing problems I've disabled hotstart (chmod -x) temporarilly to remove it from the picture, but there was no change.
View 5 Replies View RelatedI have a database called 'gaming' and with in that database there are several tables and data. I was asked to find a module called 'ako ldap' and disable it (setting it from 1 to 0). My question is how in MySQL do I search for a string if I don't even know what table to search in? I know how to search using the 'select' statement as long as I know where the table data is. In this case I only know which database but nothing more except what I am looking for.
View 1 Replies View RelatedTo make my problem simple to understand I've attached a picture. Basically, in the Webmin>Apache configuration page, where I used to also enable/disable the modules Apache was using (on Ubuntu 8.04) I've noticed now that the option to configure the modules is no more (on Centos 5). So, I'd like to disable and enable some modules but can't, like the mod_python for example which gives me hundreds of errors in the Apache's logs, but cannot.
how to view the Apache modules again in Webmin?
just noticed can't attach images... here's the link to the picture: [URL]
i have purchased sun server for my visualization project. Request you to help me finding the io for disk .I have put storage(disks) on different location (File Server) and on server (Application) i have configured 4 virtual machines.
How would i monitor the io for file server from the Application server where i have configured 4 virtual machine. one way to mount the file server share on application server and execute
dd if=/dev/zero of=/share/test.out bs=1024 count=1024 to check the read and write Is there any other way of doing this.
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
I'm update Python , but founde problem root@server [~]# yum update There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named yum
Please install a package which provides this module, or verify that the module is installed correctly.It's possible that the above module doesn't match the current version of Python, which is: 2.6.7 (r267:88850, Jun 7 2011, 12:25:26) [GCC 4.1.2 20080704 (Red Hat 4.1.2-50)] If you cannot solve this problem yourself, please go to the yum faq at: [URL]...
Many Apache2 unused modules loaded. I'm going to disable some of them.But what is the command to disable the modules?
View 1 Replies View RelatedI've been playing with some intel server board and they provide a type of fakeraid which is called Embedded Server Raid Technology 2. Since Intel officially support RHEL and SLES on their servers, they provide drivers/modules for this fake raid (which supports raid 0, 1, 5 and 10). I have installed RHEL before on these severs and redhat's installer has the ability to load additional modules (via a boot command linux dd).
While intel doesn't provide the modules for other operating systems, they provide a library where people can build their own module for their kernel. I managed to build this module called 'megasr' (for now I've built it for kernel 2.6.32-24-generic which is my testbed at the moment but I would eventually build it for box i386 and amd64 for both server and desktop versions) and load it on a system which is installed on a single drive.
We are able to load it successfully and see the raid 5 as a single volume and access it (partition, format and copy data to it) and all its functions (work in degraded mode, rebuild, etc) work fine but my main goal is to actually install such volume as my main boot volume (similar to how its possible with RHEL or SLES). Is this possible? Load additional modules during the installation that will be present after the installation is finished?
I use Debian 5.0.6 32-bit through VMware workstation installed on my Windows Server 2003. I just simply installed it from CD-1 and I use Directadmin on that.
I need a lot of iptables commands for blocking but I keep getting missing module errors on that one, I did lsmod | grep -i iptables to see there are no modules. It should have been installed by the disc image but I don't know why it didn't. So I now want to know how to get those modules required by iptables.
what is happening on my Centos virtual server (ps I'm having a great time re-learning Linux after a large gap and usually try and find out myself but this has me confused) First thing I did was install Tomcat and try and change the port to 80 using iptables -nat and it complained a kernel module was missing. Instead setup Apache to redirect requests so that's now working I then tried to install CSF firewall and the validation perl script returned fatal errors so I assumed OK my virtual server Kernel is restricted and used denyhosts instead which is working great
Here's the confusion.. I later retried the csftest script and it now works including all the iptables and nat stuff that fataled before. I've not rebooted or changed anything except run denyhosts and the postgres daemon + ended a few daemons that I didn't need (eg pickup,tlsmgr,courier,postfix,qmgr,saslauthd) Running lsmod returns nothing and /proc/modules is zero bytes so I'm not able to tell what is loaded? I'm tempted to try and get Tomcat redirecting via iptables and see what happens but if it works I don't like that something seems to have changed.. before I ran it direct as root now I'm SU into root from another login
I am administrating a server with CentOS installed. It came with qmail and courier-imap preinstalled, and Plesk.I need to manually add email accounts outside of Plesk, because my 1-domain Plesk license only allows the creation of one email address (yes, it sucks).
When I say add email account I mean creating a new email address, have email for that address be stored in its maildir, and have a corresponding imap (and hipefully also pop3) account that will be able to read that mail. All this with virtual domains.I've already found out how to create the new email addresses for qmail, so that email for the new email address is being delivered correctly. Now I need to create the imap/pop3 accounts for courier.
For the qmail part, I create a folder in in /var/qmail/mailnames/virtualdomain.org/username and a maildir called Maildir inside it. This is how the first mail address was created by Plesk and i'd like to maintain the same structure. As I've said, the qmail part is already working, I need to get the courier-imap part to work. Ideally, it should accept login with both short (i.e. myuser) and long (i.e. myuser@virtualdomain.org) user names.
Currently the only authentication module that is enabled in courier-imap is authpsa, which is Plesk's authentication module.in order to add more authentication modules, do I just need to add them to the authentication module list in /etc/courierimap/imapd, or do I need to reinstall courier-imap with support for such authentication modules? I thought I would only need to add them to the list, but I've noticed that the /usr/lib/courier-imap/authlib/ folder only contains a binary called "authpsa". Does that mean that other authentication modules are not even installed? If so, can I install them without reinstalling courier?
The second question is, what would be the most recommended authentication module that would make it easiest to create new email addresses/accounts from the command line? I need to be able to write a shell scripts capable of creating a new email address with all that is needed, and I'd like to keep this script as simple as possible, so for example I'd avoid mysql-based authentication as it sounds rather complicated. And the last question is, if I do need to reinstall courier-imap, how can I install a package without recompiling it? Will my one existing mailbox keep working?
I have the following perl/DBI script:
Quote:
#!/usr/bin/perl
use DBI;
my ($db, $user, $pw) = ('dbname', '****', '***********');
my $dbh = DBI->connect("DBI:mysql:$db",$user,$pw) or die "Cannot connect to $db: $DBI::errstr
[code].....
The error message is
[Wed Feb 24 13:03:27 2010] myscript.cgi: DBD::mysql::st execute failed: Column count doesn't match value count at row 1 at myscript.cgi. [Wed Feb 24 13:03:27 2010] myscript.cgi: DBI::db=HASH(0x8a30c60)->errstr
I am running ubuntu 10.04 as a web/file server. I have set up several cron jobs in the past which until recently were executing normally. However, a few days ago, cron jobs stopped executing after a restart. I was able to fix the problem by deleting and reentering the cron jobs, but only until the next restart. ps -ef lists cron.
Summary:
1.) Cron was working --jobs executed without error and restarts worked fine
2.) Cron jobs stopped executing after a restart about a week ago --ps -e still lists cron
3.) Removing all cron jobs and reentering them by copying and pasting fixes until next restart
4.) Cron job syntax is known to be correct since they were executing before this problem arose.
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
what is wrong i have a web server setup and working fine running a web store in php i have added a search engine for the web the easiest setup programme is with an extension .pl when i try and execute this it asks me if i want to download it or open it i had this problem with the php script which a reboot sorted out so i have tried rebooting but get the same problem does anybody know how i can get it to execute on my server?
View 2 Replies View RelatedI have now had an Ubuntu desktop server on a very crappy server (network filesystem with enourmus latency) for a year and as the subscription will soon run out I opted for a slightly better one, still crappy but at least a "complete server" (cpu+mem+HD).And a headless installation of Ubuntu Server 10.10 "Maverick Meerkat" instead of my Desktop version.I'm not using it for web pages or other 'ordinary' things though, I'm running my homemade MMORPG off of it and this new headless situation is a bit unclear to me.
I created an account and password with my root account, a folder with the username was created in /home/ and I uploaded my mmorpg executable there with an ftp client.I tried to change the whole folder (being root) to 777 but it didn't work either.
I am trying to use a freshly installed kubuntu 10.04.1 LTS and am having major problems with delays in command execution. The box worked fine after installation. I then brought it to the client and it was fine for another day or so. Now, most of the commands I run take up to five minutes to execute. An 'ls' or 'top' will run straight away but and 'ssh','rm' or 'sudo apt-get' will just sit there for ever:
[Code]...
A reboot changed nothing. The shutdown was immediate so 'shutdown' is another command that works properly. The load of the box is '0', I used team viewer to see if I got the same problem from the LAN side rather than the WAN. It's the same. I thought it might have been the disks that had spinned down but it would have sped up after the ssh connection. After further analysis, it looks like this could be an authentication problem. The problem shows once the ssh password is validated and when we use sudo. Could this be related to the installation of samba3?
how to call a c function or to execute a c pgm o/p from php file and this output should be displayed in the html page ? I have tried with system() and exec()but its not working.
View 2 Replies View RelatedI had some command lines that I want to execute them with the server goes up. how can I do that?
View 2 Replies View RelatedI am trying to determine if I should upgrade PHP's PEAR on my server. I am trying to check the version of PEAR currently installed. I am getting the following error when I use the pear -V command:Warning: realpath(): open_basedir restriction in effect. File(/tmp) is not within the allowed path(s)(/usr/share/pear:/usr/share/php) in System.php on line 459I tried adding /tmp to my php.ini file, but then when I use the pear -V command it doesn't do anything. I do not get any errors or anything.I am also trying to install symfony and have the same situation described above when I use the following command: pear cannel-discover pear.symfony-project.comDoes anyone have any thoughts? If not the solution, does anyone have any suggestions on how to begin troubleshooting this?
View 2 Replies View RelatedI was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
i created a /tmp partition amd mounted it like this:" mount -o loop,noexec,nosuid,rw /usr/tmpDSK /tmp"
I know i can't execute things in /tmp now but is there a way to execute only one file and no more???
I have debian lenny, when I run an application is slow to load (example: iceweacel open and it takes, I can hold him iceweacel work normally), I tried to change from gnome to another and the same thing, went down some services (samba, squid) and nothing. I open a terminal and it takes, I want to duplicate it and do it fast. From a terminal without X (tty1) with root run mc and moves quickly, also run as root "sudo mc" and takes to boot.Any action done with sudo it takes to run.Can not be what it takes to make starting the applications, not the PC because it is new, and from one moment to another I began to pass this
View 2 Replies View Related