We have an external server that runs HTTP/DB servers for out shop system.Then, there's our local, in-house infrastructure that runs a.. yeah... Exchange 2010.The shop system on the external server needs to send mails to customersrder confirmations, invoices, etc.). seing as sending them directly through the local MTA (Postfix) would cause mail delivery problems because of reverse DNS issues, i've set the Postfix MTA to act as a satellite to our in-house Exchange Server, so the Exchange sends the mail instead, giving recipient mail servers a valid reverse DNS lookup.
Now, mails sent by the (proprietary, uneditable) shop system are relayed correctly and sent to the target e-mail address.My problem is: Mails not sent by the shop system, but by our own PHP scripts which run on that same external servers, are NOT relayed properly.So the Exchange is fine with the mails sent by the shop system, but not the mails sent by our scripts.This is what i get in the mail.log:The successfully relayed mail sent by the shop system:Quote:
Jan 12 16:10:42 appenzeller postfix/pickup[24729]: 95EFD2A22B7: uid=33 from=<www-data>
Jan 12 16:10:42 appenzeller postfix/cleanup[25330]: 95EFD2A22B7: message-id=<20110112151042.95EFD2A22B7@local.domain.tld>
I have got a running mail server on CentOS5.4 Final using Zimbra free edition. . Assume that domain is organization.com.local And it is running fine with users created and bugzilla running on the same machine can send mails using this server. But it can obviously send messages to the internal users. There is this option to configure it to use external mail server to send mails outside the network but my external smtp server needs an authentication.Is it possible to configure it this way to use my external server to send mails from internal domain to say gmail?
am using qmail and have webmin, all is running smoothly, but i have users spamming other staff accounts.The question: How do I block a user from sending out mails but still able to receive mails. Just denying access to sending mails?if anyone can guide me to do it via terminal as well as webmin.Why webmin you ask, because I have tried it once it works but sadly it block both incoming and outgoing mails.
As a beginner I installed Fedora 11 yesterday. Everything went well until I installed Evolution and Thunderbird. Incoming mails went well, but outgoing mails not.
I'm looking for a shop floor maintenance program that runs with Ubuntu. I have equipment that I need to track and schedule general and preventative maintenance on. Lots of Window junk ware available. I haven't found anything for Ubuntu yet. Can anyone recommend a program?
Do you know any software or any way that helps to displaying some advertisements (multimedia ones, like video, images and sound also) on a big screen connected to PC in one shop? I am new on linux.
I would like to set disclaimer like content in my meral mail server, so that all the users should be able to get that content automatically in their outgoing mails.
I setup a qmail on a Debian 5 Lenny server with courier-imap server. I can send mails but cannot receive mails. I altered /etc/init.d/qmail as follows.
1) I have my Nagios running on the linux box and BMC Remedy Server on the Solaris box. I have simulated a mail from Nagios to be delivered to the Remedy server. But the Remedy Server does not receive it. I even tried snooping on port 25 but nothing has reached the box.
2) I have my Nagios running on the linux box and BMC Remedy Server on the Solaris box. I have simulated a mail from Nagios to be delivered to the Remedy server. I snooped on port 25 on the Solaris box. I could see the mail reaching the box, but it is not being forwarded to the Remedy inbox.
I'm looking to upgrade the infrastructure in our office (small web development shop). I'm going to buy a small floor standing rack and in it we will have a dedicated firewall / VPN box, a web development server and a fileserver (for now). I intend to use Debian squeeze for everything.
My main question is what should I do about RAID? I've not used it myself before, instead relying on backups to removable disks. This time I want to do everything properly, and a measure of disk redundancy is required so I guess we will be going for RAID 1.
I'm looking at this [URL].. server which comes with an Intel ICH10R RAID controller on board, and also has an option to add a 3ware 9650SE-LP. The site says the Intel chipset is Windows only, so I guess the 3ware alternative is the way to go. The server also has two 3.5" hot swap drive bays. Could anybody advise me if the 3ware card is a good choice for use with Debian? Also, how can I monitor the health of the drives with standard Debian tools out of the repos? Any other RAID tips are also interesting for me.
I have succesfully installed Postfix mail server in my linux machine(using RHEL 5) but unable to communicate through mails from my linux machine to my windows machine(Windows2003 server). What are the possible configuration steps that i need to configure on my windows machine
I need to build a system that can provide me capacity to send more than 50.000 mails per hour. Now I have inherit a server farm with 40 postfix servers, and one server managing which of this servers send the mails but its programming for someone but it's too complex. I would like to have a new system for do that, (To manage hotmails, Yahoo and others complains i have a contract with a specialist company to have ours ips in whitelist, activate and deactivate servers )
I've enabled popb4smtp in my mail server. Is this because of the IP 117.58.246.10 don't have a dns record? How can I sending email from this type of Ip which don't have dns entry?. But if I enable SMTP auth I can send email form this same ip. Another thing is I can connect to port 587 from the email client to send email but can't connect to port 25.
i need to ask you about doing some redirect to some mail messages to other mail server outside my mail server, i need to deploy this feature as the message received by my server.also i need to keep a copy of these messages too.
i have setup a mail sending server using which i am able to send mail to gmail's ids but when user is having yahoo or rediffmail mail id these mails are not getting delivered either these are blocked or bounced back. what should be done to send multiple mails. just to add more details, i am using sendmail to send these mass emails.
I need to set a delay between sending two mails (say 1 second). I have a shared server so delay for specific domain will be more usefull(aaa.com - 2 sec, bb.com 1 sec etc).
My requirement is i want to send mails from server to all my employess with one attachment file for every monday and friday like scheduler.. how it is possible through bash script.
I have report running through a Unix server. In this it takes out certain data of the database and sends it to each of the user's mailbox. But if some user replies or has set his out of office reply then this server keeps on sending h the same mail again and again. I need stop it.
i have a mail server that uses Postfix as a mail server, it runs ok, but i need to add some features to a specific users only.what i need to add is Auto-reply message for some users only.
I have a pop server OS RHEL 5.3 64 bit it's uses fetchmail for downloading our users mails and relay it to our exchange server. Now my question is I have some deferred mails in rhel pop server mailq and I want to forward those deferred mails on my admin email id
i have a postfix mail server in my office and mailscanner. recently i changed the password of mailscanner's admin login 'mailwatch' and now i m unable to get login in postfixmail scanner. even i changed the password of mailwatch user from mysql database, bt it does not work. get login into mailscanner to chk the mails of all users.
I have configured qmail on my CentOS5.5 server. I am planning to divert all the mails sent to one domain to be diverted to another domain. For example, I wish mails sent to user@my.external.domain.com to be seamlessly diverted to user@my.internal.domain.com. I tried.Code: my.external.domain.com:my.internal.domain.com in the smtproutes file. It did not work Also how can I have the reply to address different from the one I sent. Again, I wish, if I send emails from user@my.internal.domain.com.
I am having many mails transferred through my Sendmail server, so I want to configure it not to allow more than 60 mails to be sent by my sendmail server per minute. How to optimize my mail server's configuration.
how can i search mails in queue of sendmail /var/spool/mqueue by IP. This facility is available in qmail e.g. qmqtool -f '10.10.10.10' this search all mail messages by IP and we can delete all the message easily.