how can i search mails in queue of sendmail /var/spool/mqueue by IP. This facility is available in qmail e.g. qmqtool -f '10.10.10.10' this search all mail messages by IP and we can delete all the message easily.
View 1 RepliesOn the postfix mailserver of our company I'm seeing several of these messages in the deferred queue (apologies for the terrible formatting, I couldn't get it any better) code...
looking at the headers, there is probably something wrong with our DNS-server, which we will investigate, but I still have some questions about the failure notice:
- why are the failure notices refused? Is that a fault on the sender side, for example sending the wrong return address?
- where does this mxcorp1.pacific.net.sg[192.169.41.21] come from anyway? I don't see it anywhere in the headers.
Is there a simple way to move the Sendmail queue folder? Presently it's at the default location on /var/spool/mqueue/ but when / recently ran out of space (my fault storing backups there), it was unable to receive any more mail. There is plenty of space at another partition. My /var/opt/scalix location lives on another set of discs with lots of room. I created a folder called /var/opt/scalix/sendmail/mailqueue/ but uncertain how to move the existing queue to it.
View 1 Replies View RelatedI need to set a delay between sending two mails (say 1 second). I have a shared server so delay for specific domain will be more usefull(aaa.com - 2 sec, bb.com 1 sec etc).
View 6 Replies View RelatedMessages are stuck in my server's /var/spool/mqueue/ folder beyond the lifetime I have specified in confTO_QUEUERETURN (5d). Any idea why this could be? The file permissions appear fine; files in the mqueue folder show rights of: Code:-rw------- 1 root smmspThis is causing an issue because the queues are slowly getting larger and larger. I'm seeing the queue size consistently growing. maillog shows entries like: Code:grew WorkList for /var/spool/mqueue to 28000Just thinking outloud -- could the queue runner not be completing it's job in time? Maybe I could check with time sendmail -q
View 1 Replies View RelatedI want to setup sendmail to alert for Nagios, OSSEC, redmine, ...
I configure sendmail to work with Gmail smtp follow this guide. I disable local delivery in sendmail by adding the following lines in sendmail.mc:
Code:
define(`MAIL_HUB', `xx.localdomain.')dnl
define(`LOCAL_RELAY', `xx.localdomain.')dnl
it works but this messages seems to be stuck in sendmail queue:
Code:
sendmail -bp
...
[Code].....
Sendmail isn't sending mail for some reason and keeping it in the Queue. I attemped to flush them but it deferres the connection to the server in which it is trying to relay the message to. I have checked to see if there is a DNS error or anything like that. I attemped to flush the messages through webmin.
This is the result.
Code:
I am not finding anything in the logs to let me know their is an error. I can ping the mail servers that it is trying to send to. Now it has started delaying when ping MX servers. So I knew something was starting to mess with it. I have checked the /etc/hosts. It is correct. The server isn't black listed. Mail to root just gives me.
Code:
I am having many mails transferred through my Sendmail server, so I want to configure it not to allow more than 60 mails to be sent by my sendmail server per minute. How to optimize my mail server's configuration.
View 6 Replies View RelatedI am having Sendmail ver 8.13.1 installed on CentOS 4.5. Recently we have noticed that some emails are not getting delivered to user. Mailserver is receiving emails and they are getting processed but not getting delivered to user.
I have checked mail log and in the log it shows that email has been delivered to user below is log for reference
How long normaly keep the mail server send mails on the outbox queue and try to send? What about hotmail, gmx and gmail mail server?
View 1 Replies View RelatedI installed sendmail in my fedora 7 system. i took the advice as provided in this url [url] I started with "Configuring s`endmail"
Then i went with installing MailScanner without going to clamav and spamassasin installation as i don need it.
I just configured my local domain and assigned a my own IP address. But there was nothing mentioned with configuring the port number. So i just went with "netstat -nl" command. And it showed that my IP is lisening on port 53.
I created 2 users for the domain and i sent mail via telnet. The mail entry got entered in maillog file. But i receive multiple unwanted entries that mail is sent from "root" to "root". But i didn't bother about that.
I proceeded with the next step of configuring the two users on thunderbird. I configured with pop3 on port 53 with the localdomain. Now i sent mail from one user to the other. The mail entry got stored in maillog but i couldn't retrieve the mail on my inbox.
But the mail gets stored in /var/mail/<user>
What configurations will be required in DNS and sendmail server to send mails from one domain abc.com to other domain xyz.com.
View 1 Replies View Relatedthis is sasidhar. we are getting problems with sendmail. we have a site, when user registers we are sending a confirmation mail to user. The problem is some times it is not sending mails to users. The user accounts are valid.This is what I am getting reply to my mail
[Code]...
Ok for some reason my sendmail queue is not processing the mail that's in mailq it looks like it trys to process and times out or something and skips to the next one, is there any way I can find out why it's not sending the queue list that's in mailq. the mail that's in the queue list is from my websites registration form.
View 14 Replies View RelatedI am directly creating "qf" & "df" files into the sendmail queue folder and then processing this queue by command line. This is the only way to export data and email from this old application I am stuck with.This works quite well in my test enviornment but I am really new to linux/sendmail and just looking for any feedback on this process. Is this direct creation of queue files safe and any pitfalls that I should be aware of?
View 2 Replies View RelatedI have a server which is installed Red Hat linux 7.3. I am able to send mails out but i Cannot receive those sent to me.
View 1 Replies View RelatedI'm using Debian stable wheezy and icedove 31.5.0.
I have many different accounts set up on my icedove and sometimes I don't remember on which account I received the specific email I'm looking for, so I would like to be able to search through all my folders (say, absolutely all folders: all accounts, inbox, sent, trash, drafts, etc...).
Neither the quick filter toolbar, nor the "Search message" (Ctrl-Shift-F) feature seem to allow this. Now that's where the brand new shining "Global Search" (Ctrl-K) feature should be useful. However it does not seem to support partial match. So for instance if I'm looking for someone named "Lebenhaus GrossGrabenstein" but only remember that his name contains "Gross", the search through global search will return no result.
I'm pretty sure it was possible to do a proper search (with partial matching) accross all mails in previous versions of icedove, but I cannot find it anymore.
Right now the only workaround I have is to do a "grep -R" on my ~/.icedove folder, which is not very efficient and not flexible at all...
I use this command to fetching mail from gmail it work good but it does not retrieved mails from server as I read from manual.
Quote:
fetchmail -d0 -F -K pop.gmail.com
What is wrong and what should I do?
I have configured sendmail server on my Rhel5 machine.i just wanted to know whether i can connect my machine with internet and send my mails through sendmail.
View 1 Replies View RelatedI am using webmin for my daily tasks. I have fedora 13, whenever I click on ''Sendmail M4 Configuration'' or Outgoing Addresses (generics)'' I get the following error message
Quote:
The Sendmail M4 configuration base directory /usr/share/sendmail-cf was not found on your system, or is not the correct directory. Maybe it has not been installed (common for packaged installs of Sendmail), or the module config is incorrect. I read documentation at sendmail.org, it seems that structure of directories for send mail has been changed in version sendmail-8.1.4 shipped with FC13. In webmin config module we have
Quote:
Sendmail M4 base directory = /usr/share/sendmail-cf
which is not there. I did a locate / sendmail-cf on the command line, it finds nothing
I recently modified sendmail.cf to use a third party SMTP server to send emails. It works great. But when I run sendmail from the command line, I have to specify the -C flag and force feed it the location of my sendmail.cf, or else it doesn't work.
So in other words, the following works great:
However, if I don't specify the -C flag, sendmail doesn't consider what's in the sendmail.cf and barfs:
I don't run sendmail as a daemon. I'm only using it to send emails. I know my modifications of sendmail.cf are correct because it works perfectly when I use the -C flag. I searched my disk to see if I could find another sendmail.cf on the machine and only the one in /etc/mail came up.
Why sendmail is not reading my sendmail.cf?
I'm running Sendmail version 8.14.2 on Fedora Core 8.
is it possible to get the length or even the items of both queues, the run queue and the swap queue? I've googled a lot but had no luck. Maybe I havn't used the correct search words...
Is there any header and/or code example to use structures or any API to get these information from the kernel or the scheduler?
I have got a running mail server on CentOS5.4 Final using Zimbra free edition. . Assume that domain is organization.com.local And it is running fine with users created and bugzilla running on the same machine can send mails using this server. But it can obviously send messages to the internal users. There is this option to configure it to use external mail server to send mails outside the network but my external smtp server needs an authentication.Is it possible to configure it this way to use my external server to send mails from internal domain to say gmail?
View 15 Replies View RelatedI am newbie to postfix. I added a new domain to my postfix server in the main.cf under mydestinations variable and the relay_domains file. Also, added this domain to my backend exchange server. When I send a test message from the new domain, my messages from that domain appear to be stuck in the "queue active". What does it mean when you are stuck in this queue? Does this mean that my backend email server (exchange 2003) isn't allowing messages from this new domain OR that the POSTFIX server still needs configuring.
View 2 Replies View Relatedam using qmail and have webmin, all is running smoothly, but i have users spamming other staff accounts.The question: How do I block a user from sending out mails but still able to receive mails. Just denying access to sending mails?if anyone can guide me to do it via terminal as well as webmin.Why webmin you ask, because I have tried it once it works but sadly it block both incoming and outgoing mails.
View 3 Replies View RelatedAs a beginner I installed Fedora 11 yesterday. Everything went well until I installed Evolution and Thunderbird. Incoming mails went well, but outgoing mails not.
View 6 Replies View RelatedAm wondering if looking at the CPU process queues, vs CPU% busy, are a better indication of whether an upgrade is needed.
Afterall, processes can still queue up to be processed even if "top" doesn't shown CPU 100%. Say if it's indicating 50% busy within the top output, it's only saying that 5 out of 10 times sampled, the CPU was busy. But a process may arrive to be processed at any time, and if it arrives just when the CPU is processing something it needs to wait in the queue. Am I making senses?
How many processes queued up would suggest an upgrade is required of the CPU? I've read online (believe it's Microsoft) that 2 is the figure.
how can I best transfer my mails that are sitting on my old exim server to my new postfix server?
View 1 Replies View RelatedI would like to set disclaimer like content in my meral mail server, so that all the users should be able to get that content automatically in their outgoing mails.
View 3 Replies View RelatedMails are not going out of the queue. Removed all frozen mails and tried to flush queue using exim -qf command. Also checked queue after restarting exim. Still messages are not going out of the queue.
View 1 Replies View Related