have want to create a mail server with postfix and mysql. When i try to send mail with telnet i receive a error message :
Code:
telnet serveur2 25
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
[code]....
I tried to install the package from centosplus repo but got the error cannot find libmysqlclient.so.15.Not surprising as I have libmysqlclient.so.18. If not does anyone know how I can build postfix with support for MySQL 5.5. It doesn't help that I have never built a binary before - I found a couple of good tutorials on how to build from source that seem straight forward enough but I have no idea what needs to be specified for the postfix build.
running CentOS 5.6
MySQL5.5 (Remi)
PHP 5.3.6 (Remi)
I did a basic U9.10 server install of postfix with the minimal config. Added a test user and things worked after a few minutes. I now want to setup a few new things and want to switch to use mysql as the back-end. I have mysql installed, setup postfix.admin which in turn setup the database/tables. Now when I logged in to that admin, the original test user is not there (which is fine), but I created the test domain again, created a user and an outside test failed saying user unknown.
Now I looked through the main.cf page and don't see anything obvious to say hey, put backend is mysql, here is the info. I then noticed via apt that postfix-mysql was not installed, so installed that, I see my .cf was backed up, but still don't see anywhere to connect the 2. So currently mail is still accepted from the test1 user running local. I don't mind wiping everyhing, but is there a simple place to just make a change or 2?
i need to configure postfix on centos to relay email from the internet to the Exchange Server and i also need that emails sent from the exchange within the same domain be sent to postfix then resent to exchange because i have spamassassin and clamav installed on centos to filter all incoming and outgoing mails ...
View 1 Replies View Relatedim trying to setup a mail server i am with fedora core, postfix and i have a dsl internet connexion my ip is dynamic so i readed some tutorial on how to configure postfix
Quote:
myhostname = mta1.domain.com
mydomain = domain.com
I was following the above guide to get a mail server up and running. The major difference in it all is the fact that my server is running i686, but I compensated for that easily, just a difference in folder/RPM names. [URL]. Otherwise I followed it to a "T." Everything seemed to go smoothly, no trips or falls until the very end.
After installing squirrelmail and trying to login on admin@withfrosted.com returns ERROR:
Connection dropped by IMAP server.
Uncle google tells me to run this command because SELinux is overzealous:
setsebool -P httpd_can_network_connect=1
And that works, and I thought I was home free. However, after that, I'm presented with a new error. However, google told me to send an email to create the mailbox because it wasn't there, yet. So I send a test email on over, but that fails, and so does mailx. Next I created /home/vmail/withfrosted.com/admin while logged into the vmail user for proper permissions. Squirrelmail now logs into the mail box but gives me yet another new error, in which I am now stuck on:
ERROR:
ERROR: Could not complete request.
Query: SELECT "INBOX"
Reason Given: Unable to open this mailbox.
As a summary, because I'm all over the place, here:
1. Can't view the mailbox via Squirrelmail.
2. Can't receive email, tried with mailx and a test email from gmail.
Regarding #2, the gmail test email, from the maillog:
May 9 07:25:45 withfrosted postfix/smtpd[21095]: connect from mail-qy0-f177.google.com[209.85.221.177]
May 9 07:25:45 withfrosted postfix/smtpd[21095]: 26CE516241D: client=mail-qy0-f177.google.com[209.85.221.177]
May 9 07:25:45 withfrosted postfix/cleanup[21104]: 26CE516241D: message-id=<z2pe336661a1005090425zaee8dc71jc3002cb7cb25e0fa@mail.gmail.com>
May 9 07:25:45 withfrosted postfix/qmgr[19083]: 26CE516241D: from=<issact@gmail.com>, size=1866, nrcpt=1 (queue active)
May 9 07:25:45 withfrosted amavis[21024]: (21024-01) (!)connect_to_sql: unable to connect to DSN 'DBI:mysql:database=mail;host=127.0.0.1;port=3306': Can't connect to MySQL server on '127.0.0.1' (13)
May 9 07:25:45 withfrosted amavis[21024]: (21024-01) (!!)TROUBLE in process_request: connect_to_sql: unable to connect to any dataset at (eval 98) line 241, <GEN15> line 5.
May 9 07:25:45 withfrosted amavis[21024]: (21024-01) (!)Requesting process rundown after fatal error
May 9 07:25:45 withfrosted postfix/smtp[21105]: 26CE516241D: to=<admin@withfrosted.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=0.2, delays=0.11/0.01/0.01/0.07, dsn=4.3.2, status=deferred (host 127.0.0.1[127.0.0.1] said: 421 4.3.2 Service shutting down, closing channel (in reply to RCPT TO command))
May 9 07:26:15 withfrosted postfix/smtpd[21095]: disconnect from mail-qy0-f177.google.com[209.85.221.177]
I want install postfix on rhel5 please send me the configuration of
View 2 Replies View RelatedI'm experimenting with with mail-servers now and I'm trying to configure postfix to send emails from one email(pop3 is gmail) to any email outside the local network. Server is Ubuntu 10.10 with the last updates.
View 1 Replies View RelatedActual I need to configure fetchmail and postfix in linux pc to get mail in outlook.
View 1 Replies View RelatedTry as I might I cant get postfix to send emails through an external email server (I can succesfully get client software to do it no trouble) After following the howto at:
[code]....
I get 5.0.0 errors re:
Code:
May 6 16:06:32 SERVER1 postfix/error[20357]: 2392F21438: to=<SOME_ADDRESS@hotmail.com>, relay=none, delay=0.17, delays=0.1/0.01/0/0.06, dsn=5.0.0, status=bounced (smtp.live.com)
Here's my main.cf
Code:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
append_dot_mydomain = no
[code]...
I get basically the same error no matter what smtpserver/username/password combination I use leading me to believe its my setup and not my username/password
I want to configure Postfix mail server to send bulk mails to others domains only but they could not send to me. steps to configure Postfix to send bulk mails and what packages required for it.
View 2 Replies View RelatedTry as I might I cant get postfix to send emails through an external email server (I can succesfully get client software to do it no trouble) After following the howto at: [URL] I get 5.0.0 errors re:
Code:
May 6 16:06:32 SERVER1 postfix/error[20357]: 2392F21438: to=<SOME_ADDRESS@hotmail.com>, relay=none, delay=0.17, delays=0.1/0.01/0/0.06, dsn=5.0.0, status=bounced (smtp.live.com)
Here's my main.cf
Code:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
[Code]....
Pam-mysql can not connect to the database and below are my configurations.
saslfinger -s Output:
root@mailbackup:/# saslfinger -s
saslfinger - postfix Cyrus sasl configuration Tue May 10 10:12:10 EAT 2011
version: 1.0.2
mode: server-side SMTP AUTH
-- basics --
Postfix: 2.7.2
System: Slackware 13.1.0
-- smtpd is linked to --libsasl2.so.2 => /usr/local/lib/libsasl2.so.2 (0x00007f74ebfb7000)
-- active SMTP AUTH and TLS parameters for smtpd --
-- listing of /usr/lib64/sasl2 --
-- listing of /usr/local/lib/sasl2 --
-- content of /usr/lib64/sasl2/smtpd.conf --
-- content of /usr/local/lib/sasl2/smtpd.conf --
-- active services in /etc/postfix/master.cf --
-- mechanisms on localhost --
I tried to install php from source file on centos server and i got the error as # ./configure --with-apxs2=/usr/local/packages/apache/bin/apxs --with-mysql --prefix=/usr/local/packages/apache/php --enable-force-cgi-redirect --disable-cgi --with-zlib --with-gettext --with-gdbm
checking for specified location of the MySQL UNIX socket... no checking for MySQL UNIX socket location... /var/lib/mysql/mysql.sock checking for mysql_close in -lmysqlclient... no checking for mysql_error in -lmysqlclient... no configure: error: mysql configure failed. Please check config.log for more information.
what is configure option of Mysql server from Centos repo? I mean configuration option used before compilation.
View 1 Replies View RelatedAs a part of migration I am proposing different scenarios to my organization. One which is asked to prepare is to configure multiple mail servers to handle incoming and outgoing mails. Say I have -[URL], I need to have accept mails from [URL] and send mail from [URL].
View 1 Replies View RelatedIt's possible to configure Postfix in order to check spam only for outgoing email?
View 2 Replies View RelatedI'm trying to set up a basic smtp server on my local computer that I can send basic, unencrypted email through on port 25. I installed postfix, and I chose the following options:
Internet Site,
System Mail Name: localhost
Root and postmaster mail recipient: I left this blank
For other domains to accept mail, I entered : NONE, localhost
No force synchronous mail updates
Local networks: 127.0.0.0/8
[Code].....
i want to know how to configure my sql server and clients in debian 5. what should be the server host name and root password
View 1 Replies View RelatedI have a server machine that is running SUSE Linux Enterprise Server 11. I set up a mysql server there. Now I want to access this mysql server from my laptop. I used the following command,
> mysql -h 12.246.5.70 -u davidehs -p
I found if the firewall on the server machine is running, I can not connect the mysql server from my laptop. If I stop the firewall first, and the do the connection, I can access the mysql. how to keep the firewall running and allow the remote mysql incoming requests?
I have a server machine that is running SUSE Linux Enterprise Server 11. I set up a mysql server there. Now I want to access this mysql server from my laptop. I used the following command,
> mysql -h 12.246.5.70 -u davidehs -p
I found if the firewall on the server machine is running, I can not connect the mysql server from my laptop. If I stop the firewall first, and the do the connection, I can access the mysql. Do you guys have any idea how to keep the firewall running and allow the remote mysql incoming requests?
I've got a working Virtual Postfix server running with mysql doing user authentication. I have a support email address set as support@hostname.com, which has 5 aliases associated; user1, user2, user3, user4, and user5. When an email is sent to support@hostname.com, all 5 users receive the email, just as planned. What I'm looking to do is when an email is sent to support@hostname.com to have it rotate through the members of the alias group. That way all members of the group get support emails evenly and not everybody all at once. Is this possible?
View 4 Replies View RelatedTwo exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
I am trying to install the IDS component barnyard2 on RHEL 5. I am following the snort enterprise insall document by Patrick Harper. For installing barnyard, after the tar command it says to perform a ./configure --enable-mysql The --enable-mysql does not work: configure: WARNING: unrecognized options: --enable-mysql --with-mysql does work. Is there a difference? Next, using --with-mysql, I get a failure at the end:
ERROR! Libpcap library/headers (libpcap.a (or .so)/pcap.h) not found, go get it from Open Source and Linux Forums dot tcpdump dot org TCPDUMP/LIBPCAP public repository or use the --with-libpcap-* options, if you have it installed in unusual place. Also check if your libpcap depends on another shared library that may be installed in an unusual place I do a find / -name libpcap* and get:
/usr/share/doc/libpcap-0.9.4
/usr/lib/libpcap.so.0.9.4
/usr/lib/libpcap.so.0
/usr/lib/libpcap.so.0.9
/usr/lib64/libpcap.so.0.9.4
/usr/lib64/libpcap.so.0
/usr/lib64/libpcap.so.0.9
How do I tell the configure to use one of the above? I don't understand how to use the --with-libpcap-* option?
is there any HOWTO for configuring Webmin Postfix server with multiple postfix virtual hosts? Seems to be a tough challenge to set it up without any easy manual..
View 1 Replies View Relatedso i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
View 7 Replies View RelatedI recently moved over user from an old box running postfix(v 2.0.16) over to rhel 6 running postfix (v mail_version = 2.6.6). ive tried to make sure all the files are of correct permissions and that the main.cf file is configured corectly. However there is something wrong as when i run postfix: service postfix server i get no error but when checking the status:service postfix status i get: master dead but pid file exists Looking into /var/log/mailog i find this line being the issue:
Feb 25 16:24:39 puny1 postfix/master[3517]: fatal: fifo_listen: create fifo public/pickup: Permission denied
I gather this is a file permission issue and ive tried to make sure the public folder in /var/spool/postfix is correctly set but still no avail.
