Server :: FreeSWITCH Not Responding To Registration Request - SFLphone Returns A 408
Jul 8, 2010
Server
Distro: Debian Testing (Squeeze)
FreeSWITCH ver.: 1.0.6
Client (Dual-Boot Setup) Problem: Both Windows Vista Ultimate 64-Bit and Ubuntu 10.04 LTS versions of Ekiga, including SFLphone in Ubuntu 10.04 seems to be ignored by FreeSWITCH. FreeSWITCH fails to register. In the client side, the Windows firewall gets turned off for testing while everything in iptables under Ubuntu has everything set to accept in the filter section. In the server side, the firewall configuration is quite basic.eth0: Cable Modem plugged in via USB cable eth1: nVidia Gigabit that connects to my 1Gbit switch
[Code]....
View 2 Replies
ADVERTISEMENT
May 18, 2009
I am running a 2 NIC system with the routing table for eth0 allows user access to the internet,etc. and eth1 routes to another private network (192.168.x.x). eth1 is configured to handle DHCP requests.When a device connected via eth1 boots, it requests an IP from the DHCP server. Using tcpdump, eth1 is receiving the request but is not offering a lease.dhcp.conf seems to be configuring the DHCP service correctly. and dhcpd is running.The host is running Red Hat Enterprise Linux (Server Edition) 5.1. Perhaps I need to modify fire-wall rules (or disable them on eth1 altogether)?
View 2 Replies
View Related
Jan 21, 2011
How a new server can be registered in RHN to get the updates & packages ?
View 3 Replies
View Related
Jun 25, 2010
how to redirect all client http request to https request in squid
View 1 Replies
View Related
Feb 2, 2011
Is there a hook thing in the Linux DNS. What I mean here is - in Linux hooks are called when the status of the network changed - like dhclient-enter-hook, exit-hook etc - is there similar thing when a dhcp client registers itself with the DNS?
View 3 Replies
View Related
May 11, 2009
I am new in linux,I installed apache-tomcat on fedora.I can view all web pages on localhost:8080 but when I try to view them by server's url address from another computer, I don't get respond.Can it be a firewall problem or something else?
View 4 Replies
View Related
Jul 2, 2009
I have a function in my SOAP server that returns an array. When the client calls this function, it only receives "array", and when I use foreach to print each member of this array, it tells me that this is not an array. If I change the returned value of the function to a string or integer type everything works fine though, so I don't think that there is any problem with the client.I am using NuSOAP library on php to achieve that.I had doubt when declaring the type of return value of the function. In XML schema there is no array type, so I specified the return value as a string like this:
PHP Code:
$server->register("getLocation",
array('country_population' => 'xsd:string',
[code]....
View 1 Replies
View Related
Jul 14, 2010
I've got a machine running Ubuntu Server that is on several VLANs. Each VLAN has its own subnet and the server has an address on each subnet. The switches are set to allow tagged traffic to the server for each VLAN that it is on. Switch ports ending with workstations are given untagged ports on whatever VLAN is appropriate. Workstations are given addresses on a subnet for each VLAN via DHCP. All this works great and hosts on any subnet/VLAN can access the server as normal via its address on that subnet/VLAN.
Accessing the machine by its address on a non-local subnet is where I run into a problem. Inter-subnet traffic has to go through a router, which has been set up appropriately. Running tcpdump on the server and pinging it from a workstation on a subnet, using its address on a different subnet, shows the server receives the ping, but sends no response:
Code:
sudo tcpdump -i vlan4 -n
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
[code]...
View 8 Replies
View Related
Jan 4, 2010
I am connecting servers using NFS4 the shared directories are on servers running Debian 4 while the one who read from them is Debian 5.0.3. The problem is one of these shared servers suddenly stop responding and you cannot list it from Debian 5 server, also df hang, and the web application that is using it does not respond to requests that use this shared directory since it is blocked. Then the load on the server start to increase until the server cannot respond (over 90). I have found many entries in the syslog that refer to this like:
ma25555 kernel: [1200285.732919] nfs: server 10.xxx.xxx.xxx not responding, still trying
Dec 31 08:16:33 ma25555 kernel: [1200289.815378] INFO: task java:9702 blocked for more than 120 seconds.
Dec 31 08:16:33 ma25555 kernel: [1200289.835249] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
code....
I have tried the connection between the 2 servers using ping for one day and all are OK (zero lost)
There are 3 other servers that are running Debian 4 and are working fine.
View 1 Replies
View Related
Aug 23, 2010
I have problems with nfs. There is an old legato cluster Automated Availability Manager on Linux. And lately we noticed problem with nfs
in the logs there are still entries:
I tried to add more threads in /etc/sysconfig/nfs but it didn't help.
And on one node there is info regarding double mounted filesystems with df -h command. Why? In /etc/fstab is only one entry.
View 1 Replies
View Related
Jun 23, 2010
I'm attempting to use REGEX to isolate media (video and audio) essence that relate to alias/reference Quicktime movies. The Quicktime movie filename (excluding ".mov" can always be found in the media-essence filename.Stages of my process are:I cache the contents of a text file into an array ($file). This text file/array contains a list of Quicktime movies and media essence. Essence for each Quicktime movie is contained in this text file. An example text file is below:
Code:
MOVIE1.mov
media.dir/MOVIE1.m2v
[code]....
View 2 Replies
View Related
Nov 17, 2010
I have vnc server 4.1 installed in server and setup /root/.vnc/xstartup and /etc/sysconfig/vncservers as below.
/root/.vnc/xstartup
#!/bin/sh
# Uncomment the following two lines for normal desktop:
# unset SESSION_MANAGER
# exec /etc/X11/xinit/xinitrc
xhost +localhost +'hostname'
[Code]...
now i tried connecting to this server by vnc vnc viwer from my windows Vista machine..But only getting blank screen without a terminal window or anything opened.
View 1 Replies
View Related
Dec 8, 2010
5.5 (64bit). My server goes into non responding state where I can't telnet, ftp or ssh server whereas PING is the only thing which works at that time. I need to hard reboot server to get it back online. This is happening very frequently in fact yesterday and today server went inaccessible. which log file should I look into to find out the reasons of this inaccessibility?
View 2 Replies
View Related
Jul 20, 2010
a file or a process that is always running and pinging for example [URL]. returning 1 or 0, when returns 0 (that means have no response) do something else. i already made the something else, basicly sends an email etc.
View 1 Replies
View Related
Jan 27, 2011
I have a question about GNU-PG security for email clients. I have read that this is the best email protection available. I have it among available Ubuntu packages, too, but when I wanted to use it the registration process asked my real name. considering full or the best possible privacy claim, why real name? or is it ok just not to give the real name? I am not advanced in cryptography, could/can this not be avoided?
View 4 Replies
View Related
Feb 17, 2010
I have two suse linux server. Recently we got the license key. In one server i could able to register successfully. Another server is throwing an error.i am using yast-software- Novel customer center configuration. After selecting configure now, i am getting error has follows Execute curl command failed with 7 curl: (7) could't connect to host.
View 3 Replies
View Related
Mar 30, 2010
I run this script but it hangs at the nail command like it's expecting a response. how to get it to send automatically?
Code:
View 3 Replies
View Related
Aug 20, 2010
are there any linux command to have how many http request are sent and received??
View 4 Replies
View Related
Apr 27, 2010
I can ssh to my server which is on a LAN accessing the'Net through a Linksys modem/router.I want to be able to configure the Router by using the it's web interface, but the server only has a Command Line Interface and I can only run text browsers like Lynx,hich, although I can log onto the router, the Javascript routines mean that I can't configure the router.I can't access the router's web interface from the 'Net because the router is set up to pass any requests on port 80 to the server.Is there any way I can communicate with the router by sending HTTP requests from my browser external to the LANhaving these relayed to the router by the server and then the server relaying the responses back to my browser.
View 2 Replies
View Related
Oct 31, 2010
Code:
kenny_strawn@kenny-AOA110:~$ sqlite3 -html -line /var/www/fluxbb/ProprietarySuckware 'select o_base_url from memos'
Error: unable to open database "/var/www/fluxbb/ProprietarySuckware": unable to open database file
kenny_strawn@kenny-AOA110:~$
This database was automatically generated by FluxBB, so I am wondering just why it isn't opening.
View 2 Replies
View Related
Feb 16, 2010
I have two suse linux server. Recently we got the license key. In one server I could able to register successfully. Another server is throwing an error. I am using yast-software- Novel customer center configuration. After selecting configure now, I am getting error has follows
Execute curl command failed with 7
curl: (7) could't connect to host.
View 2 Replies
View Related
Dec 14, 2009
I am getting an var log error while mounting remote file system to the client side as:- Kernel:NFS: Server 10.47.152.70 is not responding, still trying.
The issue is client side machine is getting hang, after i mount the file system.
I have exported the file system as ext3 at the server side using Veritas Cluster. And importing it on the client side by including the shared directory in fstab.
View 2 Replies
View Related
Feb 25, 2011
i m experiencing some problems connecting via ssh two ubuntu workstation: a ssh client and a ssh server The goal of that is to run from local client computer some X applications on the remote server machine
i have configured both client and server for X11forwarding (i think) properly Infact when i launch xeyes on the client i see the X app running
the problem is for all other X apps. For example when i run xclock, nothing happens on the local PC the prompt continues blinking without any reponse, no windows opens and the strangest thing, the shell is stucked. No possible to interrupt with [CTRL]+c the onyl thing to do is close the shell window
Starting in verbose mode (debug), X11 seems works correct , it says x11 confirm as last message .
View 3 Replies
View Related
Apr 12, 2011
MySQL cluster server refuses to respond.iptables -L shows:
Code:
target prot opt source destination
RH-Firewall-1-INPUT all -- anywhere anywhere
[code]....
View 4 Replies
View Related
Feb 23, 2010
My DNS server used to work flawlessly but for some reason it no longer responds to queries. It seems that named always queries internet root serves!!
View 3 Replies
View Related
Feb 14, 2011
Hi
I want to send non get request for HTTP from linux server.
Please let me knwo how to do that
Thanks
Lakshmikant
View 1 Replies
View Related
Feb 2, 2010
When I user wants to navigate through the internet, he must first give his username and password. The password is sent in clear text. I would like to encrypt this using SSL (or an other solution already integrated in Squid). Is this possible in Squid?I read that "user_cert" option can do this, but I couldn't configure it.I have: acl myacl user_cert src 192.168.1.5Which gives: "aclParseAclLine: Invalid ACL type 'user_cert'"The other solution is probably tunneling, but I don't want to install special software on the client machines
View 1 Replies
View Related
Jan 17, 2011
I'm trying to install citadel server on ubuntu server 10.04 via apt-get install citadel-server. I get an error at:setting up citadel-server (7.71-1)export: 106: 007: bad variable namedpkg script exits with error code 1.would this be due to unmet dependency?WalterPS. filed a bug in launchpad
View 2 Replies
View Related
Jan 13, 2011
I am trying to configure an application that requires to send mail notification on registration. But the application shows warning
Net::SMTP is installed in this environment, but {SMTP}{MAILHOST} is not defined, therefore the program listed at {MailProgram} will be used.
How to setup SMTP:MAILHOST
View 1 Replies
View Related
Feb 5, 2011
I have a Mac G3 and Squeeze 2.6.32-5-686 on an ethernet wired. Works fine with Lenny kde but only in one direction with squeeze kde4. Mac pings squeeze box ok but response is "server may be down or offline". Squeeze connects to Mac normally. Squeeze installed with server option. How do I enable eth0? I need some direction
View 11 Replies
View Related
