Server :: Backup Server - With RAID1 - 14
Mar 6, 2011
I am a college student (compSci) that moves around a lot with a laptop. I back it up often, but I dont want a simple usb hd that can be stolen from my dorm and/or damaged (its already been damaged). I am making a file server with RAID 1 that will sit at my parents house for safer backups. I just need a few pointers, I have never experimented with RAID before.
Software: Fedora 14 - Software RAID 1. I will only have ssh running on a port other than 22, behind a router, with keyed entry only so I can remotely backup my stuff.
Hardware: A new(ish) P4 mobo with two (2TB) hd's (for RAID 1) and one small hd for the OS.
My questions:
1) Should I have the OS installed on a separate drive or on the two RAID drives? I am using software RAID, not hardware, so I assume I need two external drives for the RAID.
2) Should I be using more then two hd's for a RAID 1 array?
3) How can I encrypt the RAID drives? As I said before, I have no experience with RAID.
4) If the OS drive fails, can I just grab a new hd and install Fedora on it to get the data off my RAID array? Or do I need to image the Fedora drive every so often?
5) If one of the RAID drives fail, is there some sort of daemon that can tell me? I will not be at my house physically, so I will not be able to hear scratching platters :P. Also, because the size of a single disk in the array is 2 TB, can I just go out and get any kind of 2 TB drive to replace the failed one?
6) If the MoBo fails, can I just pop in a new one (of any kind) and continue using my same array?
View 1 Replies
ADVERTISEMENT
Apr 2, 2010
I have installed a linux server in my office to run 16 machines. Its main use will be a internal mail server but will be also running websites.
I have installed Ubuntu 9.10 server x64 and have got apache running.
I am looking for the simplest more robust solution for smtp, pop3 and imap. I have only ever used qmail before and found it a pain to configure and its getting old so I though I should probably try something new. I have not much experience with running pop3 or imap on linux so would love a suggestion on that.
View 4 Replies
View Related
Aug 2, 2011
I have an Intel server, which has it's two SATA HDD's in "Intel Embedded Server RAID Technology 5.4" RAID1 volume. How to proceed with a system image in case two of those SATA HDD's fail at the same time? Should one take the first HDD of RAID1 volume, connect it to another machine and execute:
Code:
# ddrescue /dev/sda1 /media/External/image_of_first_hdd /media/External/log_of_first_hdd
* HDD from the problematic RAID1 volume would be recognised as /dev/sda1 behind new machine
* /media/External/ is a mount point for large external HDD in the new machine
* log_of_first_hdd would be the log file
..and then take the second HDD to another machine and execute:
Code:
# ddrescue /dev/sda1 /media/External/image_of_second_hdd /media/External/log_of_second_hdd
how to make system image using ddrescue in case disks are in "Intel Embedded Server RAID Technology 5.4" RAID1?
View 1 Replies
View Related
Jun 21, 2011
iam trying to sync file server data into backup server machine by command- rsync -avu path/of/data ipaddress-of-backup-server:/path/where/to/save after running it ask for root password and manually it is successful.but i want to make it automatic.for that i also tried cronjob and also generated authentication key but iam not successful in login automatically..anybody know how to authenticate root to login for storing data in backup server.
View 14 Replies
View Related
May 17, 2010
I am self teaching everything I need to develop a home-based web server (linux/apache/php/mysql/html/css/etc...) It's quite an undertaking, but not beyond my abilities. I thought this question could have gone in either the linux - software or linux - hardware forum, and certainly not in the n00b section, but I figured it's best be put in the linux - server forum, since that's what this is related to.
I have been looking into the software and hardware RAID solutions for linux because I wanted to make sure that the boot drive of the web server I set up is mirrored with transparent disk fail/replace/recovery. I mean, setting up a boot drive for RAID1 sounded perfectly logical to me, and why wouldn't it to anybody else? So, since I knew RAID controllers were expensive, I looked into the native software RAID support in linux. My findings have revealed an issue with software raiding a boot drive in not only linux but windows as well. Apparently, if the primary drive fails (not the mirror), you have no other option but to power down the system to properly replace the failed disk, reboot, play some config crap, resync the drive, do some more config crap, reboot again, and -hopefully- it'll be ok. Well, that procedure is simply out of the question since the idea behind RAID is to transparently proceed as if nothing happened.
I'd like to know if it's even possible to RAID1 the boot drive for transparent and automatic fail/hot-swap/recover WITHOUT rebooting the system and with no intervention on my part other then replacing the drive whether it be a software raid or hardware raid solution. Eventually, what I'd like to do for a drive configuration is have 3 RAID volumes on the server configured like so:
RAID volume 1 = boot drive w/ webserver installed
RAID volume 2 = database files
RAID volume 3 = flatfile storage
Each raid volume will be a RAID1 of a 1TB drive (total = 6 x 1TB drives)
I've seen a lot of people having failure issues with the software RAID in these forums. Is this more common than not? I'm certainly not opposed to buying a hardware RAID solution as long as they're reliable and provide transparent/automatic recovery. So what's the best way to RAID1 the boot drive for transparent/automatic failover?
View 4 Replies
View Related
Mar 31, 2011
I've 2 servers (xen1 and xen2 - their hostnames) with perversion configuration below: Each server have 4 SATA disks, 1 Tb each.
16 Gb ddr3
debian squeeze x64 installed:
root@xen2:~# uname -a
Linux xen2 2.6.32-5-xen-amd64 #1 SMP Wed Jan 12 05:46:49 UTC 2011 x86_64 GNU/Linux
Storage configuration: Former 256 Mb + 32 Gb of 2 of 4 disks are used as raid1 devices for /boot and swap respectively. The rest of space, 970 Gb on all 4 sata disks are used as raid10. There is LVM2 installed over that raid10. Volume group is named xenlvm (that servers are expected to use as xen 4.0.1 hosts, but the story is not about Xen troubles). / , /var, /home are located on logical volumes of small size (just found out I got mixed up with lv names and partitions, but that's not the problem, I think):
[Code]...
View 3 Replies
View Related
May 10, 2011
I install and tested Restore EE Backup server on a test PC with basic configuration and its working fine.
[URL]
The issue i have is where is the location these backup snapshots or files are saving? I want to add a separate Storage to save the backup?
View 1 Replies
View Related
Mar 13, 2011
I currently have a centos 4.4 I believe running with a 250GB hard drive. I want to make an image of that hard drive. I have tried removing the drive and connecting it to my windows pc using an adapter that would allow my windows machine run the hard drive as it was a regular external hard drive. Of course windows doesn't reconize that drive since it is linux partitioned. I am thinking that I need to have the hard drive inthe box I am wanting to copy and put in a blank drive in the box that I want to copy to. And boot from a live CD and use cat or dd to copy it. I have seen the commands before bust I am thinking this is the only way. Basically I am wanting to have a duplicate of the drive and build a whole new server that is already all setup.I will just change the host name and assign it another Public facing UP. Is this correct? Oh, and the new server will have different hardware. Might even be AMD or intel different from source or destination.
View 12 Replies
View Related
May 10, 2010
Does anyone know of any decent enterprise level backup solutions for Linux? I need to backup a few servers and a bunch of desktops onto one backup server. Using rsync/tar.gz won't cut it. I need like bi-monthly full HDD backups, and things such as that, with a nice GUI interface to add/remove systems from the backup list. I need basically something similar to CommVault or Veritas. Veritas I've used before but it has its issues, such as leaving 30GB cache files. CommVault, I have no idea how much it is, and if it supports backing up to a hard drive rather than tape.
View 7 Replies
View Related
Sep 9, 2009
I'm planning to setup a ubuntu file server. I'll be using the 8.04LTS server edition. the system is probably going to have 4 harddrives. at the end they shall form an software RAID10 system. I'd like to use lvm at some point in order to able to make snapshots as I read through some mdadm and lvm docu/tutorials I could think of two possible setups:
in both cases:
small raid1 of 2 partitions that will form /boot
small raid1 of 2 different partitions as swap space
1. the rest will form 2 large raid1, which will be combined to a single virtual drive via lvm
2. make a raid10 out of the rest with mdadm, then make a lvm volume group just consisting of the 1 virtual raid0 device are there pros/cons for either solution? is lvm as powerfull as mdadm in striping? will the first solution produce less overhead?
View 3 Replies
View Related
Apr 21, 2010
I installed a raid1 on a debian lenny box with only 1 drive "--raid-devices=1" because I didn't have the other drive yet. When I got the other drive, I used "mdadm --grow /dev/md0 --raid-devices=2" and "mdadm --manage /dev/md0 --add /dev/sdb1" The original drive is sda1. I watched /proc/mdstat until it was completely synced, and after a reboot, the system will not reassamble the raid. It fails with "mdadm: no devices found for /dev/md0" This is where root is, therefore, I get nowhere. From a rescue cd I can disable the other drive and shrink back down to 1 device and it boots fine.
View 1 Replies
View Related
Jul 25, 2011
how can I stop resyncing permenently & how can I check whether the normal sata HDDs can support RAID before/after buying HDDs. Because on every saturday or sunday resync is starting itself even there is no entry about resncing in crontab. But if I run "cat /proc/mdstat" it is showing RAID1 is perfect. see the below output
#cat /proc/mdstat
Personalities : [raid1]
md0 : active raid1 hdb1[1] hda1[0]
513984 blocks [2/2] [UU]
[code]....
View 5 Replies
View Related
Aug 9, 2010
Not sure on what is going on here. The server is RAID1 through hardware RAID. It was running an unusual high load so I rebooted it. Now it won't boot up. I am getting these errors after the CentOS boot screen:sda: Current [descriptor]: sense key: Medium ErrorAdd.Sense: Address mark not found for data field
end_request: I/O error, dev sda, sector 3040555357
device-mapper: raid1: A read failure occurred on a mirror device.
device-mapper: raid1: All sides of mirror have failed.
[code]....
View 10 Replies
View Related
Sep 11, 2009
I'd like to know what solutions do you, people, use to backup a live system that acts as a small home mail/file/irc/web server and some other purposes. For example, right now, to backup the mail, I have to stop fetchmail, kill vixie-cron to avoid any problem and then do the backup. Then restart vixie-cron.I wonder if there's any solution that will leave me do the backup without all this hassle.
View 3 Replies
View Related
Jan 7, 2011
We have the following server at collocation: [URL]
Provider's technicians were working for 3 hrs but finally were unable to set up hardware RAID1 on it.
What could prevent them from doing it? Is it difficult to set up RAID1? It is mentionned as basic function in specifications.
They said debian not booting after raid configured...
View 2 Replies
View Related
Dec 21, 2010
I am rebuilding a bunch of servers and want to do it right. They are Dell R200s and R300s with on-board LSI SAS1068E SCSI controllers with 2 SATA drives. The only RAID level supported on these cards is RAID 1. So, to the server, we have 148GB of space to deal with. They currently run 32-bit Ubuntu 8.10; I will be installing x64 Ubuntu 10.04.
I have always seen that it is best practice to partition in such a way that /boot, /var/log, /temp, and /home for example are separated out from /. Usually this is on a RAID5 or higher box. Is there any benefit to doing that sort of thing on a RAID1 box? I realize that this is in some ways a matter of opinion, but I would like the opinion of folks with experience. I'm pretty new to Linux in general.
The main services running on these boxes are Apache2, Tomcat6, MySQL, and Java.
View 2 Replies
View Related
Sep 6, 2010
My office uses a local Linux server running Red Hat 6.1 for an ancient text-based accounting program. The client computers (about 5 or so) run WinXP pro and use Tinyterm emulator to log in to the server. One of the client computers (we'll call it client1) had a user in Windows configured to do scheduled backups of the Linux server. The office worker for client1 was instructed to log in to xp as the backup user and leave the pc on all night and it would backup the linux server, then it would copy that backup to an external hard drive, attached to client1.
The c: hard drive on client1 died and no backups were available. I have restored the computer with a fresh xp install, but I have no idea what method was used to back the server up. I'm sure samba was used but I cannot find any documentation or instructions left behind by whoever set the system up. I have the ip address of the server and have restored tinyterm to be able to log in from client1. I also have access to the command line on the server. I just need help with being able to back the linux server up from a windows xp client.
View 8 Replies
View Related
Jul 22, 2011
I have SLES10-SP3 running on an Intel SR1600URHS board with 3 hot-swap SATA disks configured using mdadm as Raid1 with hot spare. If I pull one of the active disks, all file i/o will stop for about 2.5 minutes after which it will start again and the raid array will be rebuilt using the spare disk. Is there any way I can reduce this 2.5 minutes of inactivity? I've tried setting /sys/block/sdX/device/timeout and /sys/block/sdX/device/retries to 1 for all disks, but this hasn't made any difference. The output from messages is:
12:11:56: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
12:11:56: ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x1e data 0
12:11:56: res 40/00:03:00:00:20/00:00:00:00:00/b0 Emask 0x4 (timeout)
[code]....
View 1 Replies
View Related
May 20, 2010
Compared to my laptop notebook with a HD of 5400rpm, the write performance of raid1 on an ubuntu lucid server is unacceptable. In the begining, I installed ubuntu 9.04 server(alternate) using raid1 with two WD 1TB HDs of 7200rpm(Green Power) and then performed dist upgrade to 9.10 and then to 10.04.
I guess the write performance initially was reasonable since the installation and data migration(copy from another computer over LAN) didn't take too much time. However, after upgrading the server to 9.10 or so, I found large file upload through samba or ftp tends to block and time out. It is of no use whether to change the daemon or the client program so that I tried to test the read/write performance on the server to figure out the situation.
To my surprise, using strace I found even a simple program like cp would easily get blocked eventually in a write() system call for decades of seconds. Hence, I perform another disk writing test using dd for data size ranging from 50MB to 1GB. Performance test commands are listed as follows:
Quote: dd if=/dev/zero of=test.img count=[5|10|15|20|100] bs=10M
if the data to write is equal or fewer than 150MB, the command returns immediately at very hight speed but the raid disks starts to sync and busy so that the terminal prompt seems to freeze. I think this behavior is normal under the raid1 configuration, isn't it?
But when the data size is equal to 200MB, the test command blocks for seconds and the write speed is measured at about 16.6MB/s. Of course, the raid disk still starts to sync and busy afterwards. Next, I test writing with data of size 1GB. The command blocks so long for about 770 seconds(<2MB/s) while the same test runs for only 17.49 seconds(60MB/s) on my laptop.
I also burn a Lucid LiveCD to boot the server and mount the raid device to run the test again but the results remain similar. Does that means even I re-install the system on the raid, the problem never disappears?
PS: the disks run under the mode of UDMA6 without change.
View 2 Replies
View Related
Mar 15, 2009
Yesterday I installed a new server with a large partition for my XEN images. This partition is a about 930GB. The installation tooks ages and after he finished I was finding out why that is. The SoftRAID1 I configured is rebuilding the large partition.
View 7 Replies
View Related
Feb 1, 2011
We have had a hardisk crash in our RAID1 webhosting server running CentOS5 and Plesk. We first realized something was wrong when our main site didn't load but showed MySQL errors. We then found out that the system was in read-only state. Something that also happened the day before yesterday, but we could fix with a FSCK. Then the system worked well til around 18 hours later when it crashed with the same sympoms. So, we rebooted the server and wanted to do a filesystem check again. But the HDD wouldnt even load. It was gone. Unfortunatelly it was not realized that the second disk in the system was also not working any more for some time now. Fortunatelly we had our main site backed up externally though. So we could re-install a fresh box and mounted the two drives to the system. We checked the harddisk. One is practically empty (the older one), the other has almost only files in 'lost + found' but these are all "numbered", no real filenames or so.
View 2 Replies
View Related
Nov 12, 2009
I'm trying to create new RAM image file to get my server load raid1 module upon start, I was following redhat documentation & it suggested to use the following command mkinited --with=raid1 inited-raid1-$(uname -r).img $(uname -r) However after running this command I'm getting this message No Kernel available for 'inited-2.6.18-128.el5"
View 4 Replies
View Related
Jan 14, 2011
ORACLE 10.2.0.1.0 /REDHAT 5.1 - Enterprise linux 2.6.18
1. i would like to take os backup.
2.i would like to take os backup and database backup.
View 3 Replies
View Related
Dec 22, 2010
Ran into an issue where there was a corrupt tar and nothing to do except revert to an even older one. Naturally I am then asked, can you confirm via crc or something that a tar was successful?I wish to tar / gzip some files and folders, will do them seperate, some are small, others can reach 5-7GB, but is there any way to rify aside from listing the contents that upon a tar completion that everything was fine?
View 2 Replies
View Related
Jul 5, 2011
We have linux base server in US. We have to take a backup of that server we access this server through SSH secure shell client software.so we have to take a backup of that server in our pc.can anybody tell us How we should take backup of all files in our pc.
View 5 Replies
View Related
Jul 5, 2011
I have to set at Linux server(i don't know which distribution) to check something ,could some one tell me how can i take the image backup and if that possible with other software like gost image.
View 2 Replies
View Related
Jan 18, 2016
I switched last summer from Windows (used it since Windows 95) to Debian. I'm using Debian Jessie for a couple of months now and I'm getting used a little.
There are problems here and there, but I can solved them with some reading on the web. Not really a big problem...till now
I run Debian 8.2 om my PC (PC1). Bought an older PC (PC2) that I want to use as a backup server.
I'm using PC2 only for making backups, after the backup I switch it off again.
So I installed Debian 8.2 (net-install without DE and with SSH) on PC2 and tried to configure it to let it work as my backup location. Made a public SSH key and exported it to the root account (no problem) and to the user account (sensdeb), but there was an error "Access Denied"
Gave the user (sensdeb) sudo-rights via visudo file
# User privilege specification
root ALL=(ALL:ALL) ALL
sensdeb ALL=(ALL:ALL) ALL
I installed rsync.
The problem is that Rsync only works when I use the root account.
Code: Select allrsync -r -n -t -v --progress --delete -u -l -H -s /media/Data/Mp3/Anastacia root@192.168.1.102:/test/Mp3
When I try to sync with he normal user account sensdeb
Code: Select allrsync -r -n -t -v --progress --delete -u -l -H -s /media/Data/Mp3/Anastacia sensdeb@192.168.1.102:/test/Mp3
I get error's. Access Denied
I don know how to give the user sensdeb the rights so that I can use that account for my backup tasks. Now it's possible to sync with the root account, but that should not be the way to do it, I read many times.
View 7 Replies
View Related
May 30, 2010
I want to backup my DVD's to AVI (Media Server NAS). Now what works, I have tried K9Copy and that sucked! - Green lines all over the dvd's
View 5 Replies
View Related
Jul 20, 2010
This should be a quick one. I'm trying to backup a single directory and it's subdirectories on my Lucid Server to a freenas box across my network. This is what I'm using to do that rsync -r -a -v -z * --delete freenas: DSIBackups..It almost works perfectly except for one problem. When a file is deleted at the source, this command doesn't seem to delete it on the receiving end. I assumed that the --delete would do that but aparently not.
View 1 Replies
View Related
Jun 27, 2011
on my server I have atMail and a intranet site being hosted using mySQL for the database locally, and obviously backing it up would be a good thing. I got the backup package from the list if you use the add/remove software called dump-0.4.etc.. can't seem to find much on how to use it, set it up, nothing. Granted I could be looking for the wrong thing which I'm sure is the case. As of now it's looking like a USB drive is going to be my only option, that will change in the future as this "project" goes further (we are a windows shop trying out Linux, and the next step is going to be adding another server that's a file server at that point we'll probably go to NAS for the backup and then transer that to a USB for offsite/secondary backup).
View 2 Replies
View Related
