Server :: Apache Server Extreme Slow, While Samba Server Is Extreme Fast?
Jan 12, 2010
I have changed my home network a bit, and everything works extremely fast, except for my apache server, which seems to serve webpages so slowly, it is abnormal. Even simple directroy pages are served in around 5 sec, and this is not a joke! It used to work pretty fast. What I have changed is that i replaced a hub with a switch, and that I linked my personal PC with my server together through a hub. I also installed Gnome desktop on the webserver machine. My network now looks like follows:
I have a fileserver running 10.04 server 64bit and samba. I connect it to my desktop which is 10.04 desktop 64bit.I have the server mounted on my desktop in fstab as://10.0.0.2/share /media/share cifs guest, uid= 1000.Up until 30 June 2010 it was all fine. Now when I write the server it is very slow e.g. 2Mbps though when I read I get >100Mbps so I think my network is still ok. If i use nautilus smb://10.0.0.2/share I can write at >100Mbps and also read at >100Mbps...So any ideas why the write speed via the fstab mount samba has started to go really slowly in the last couple of days?
I'm running a linux cloud server with the following config 1.2ghz Processor allocation 752MB Ram
The site loads slow and clicking a link almost freezes the page for a second. Also, the page loads could be much faster. We've been running mysqltuner and have pretty much optimized all slow queries. Is there anything we can do to fine tune the server for faster and more responsive?
When I'm trying to login to the ftp server with appropriate username and password its taking almost 10-15 seconds to authenticate making the login process slow, even when I'm uploading files its again hanging for 10-15 seconds before completing the job successfully. Its not like its happening every time, but 7 times out of 10. Any idea how can make the authentication fast?
I just installed OS11.3 64bits with Firefox 3.6.6 I see an extreme memory-hog after only a day running. Now Firefox har been running for 4hours and is using over 800MB and growing with only one page up(Lotus iNotes Web-mail). I mostly use Opera web-browser (10.70 Beta) and have 4 page up and it only use 600MB stable.
If Firefox is running for 24hours the memory-usage will pass 2GB by doing nothing and OS begin to feel slow. This happens after last upgrade of Firefox.
i have ran glxgears and got good results 1000 frames in 5 secs. when it comes to playing assaultcube and urban terror the graphics arent normal and i have about 10 fps.on8.04 i had 30+fps.
I just installed fedora 10 on a Velocity Micro Quadcore with an X-Fi extreme audio. Everythings working but no audio, tried different settings, but nothing. What is the main config for the sound card? Been awhile since I've played with linux and I'm out of the loop. It's detecting everything as AutoDetect, tried other settings but nothing. I have another older machine and the sound does not work in that either. Wanted to kill two birds with one stone.
I am a new Ubuntu user and just installed Jaunty (9.04, I think) on my iBook G4. Everything was surprisingly smooth with the installation and setup. Ubuntu recognizes my wireless card (it shows a signal indicator in the top menu bar). However, I can't get it to connect to my network. My wireless is open and I entered my static IP and DNS servers. I have read various problems between Ubuntu and Apple's Airport Extreme card.
I had a coworker (now former coworker) set up a machine for me about 6 years ago so I could run a web server from my house. He put on Fedora Core (release 1 kernel 4.4.22-1.2115 on i686), MySQL, PHP, and Coppermine - which I use to run the web site. I have done pretty much NOTHING to this machine except upload images via my Windows computers since it was created.
I do know I have logged into a nice pretty interface once or twice when I had to configure the DNS when I switched my home network setup (changed sub domains etc...) Yesterday I was logged in and in a misguided attempt to get VNC and Samba working and upon reboot I managed to screw it up so that I no longer have any interface outside of the plain on text screens I would see if I connected via Putty (or some other means like that).
As you've figured out, I'm so far from knowing anything about Linux that I'm pretty much dead in the water here. I do know that my services are all still working (the web site is still serving up pages) and I can connect just fine, but any attempt to StartX results in: /usr/X11R6/bin/X: /lib/tls/libc.so.6: version 'GLIBC_2.3.4' not found (required by /usr/X11R6/bin/X)
And I have no idea what to do about it. I did download and (attempt) to install XFree86 at some point (installation instructions for VNC seemed to indicate this was a necessary step) and don't even have anything on my machine related to that version of GLIBC (the problem maybe?). Anyway, I'm frustrated, and beginning to think I'm screwed, and I suspect that there's no "UNDO" button for this mess
I was easily able to install Ubuntu 10.04 (powerpc version) on my old iBook G4 just to see what it was like. After installation, I tried to connect to my Airport Extreme, and it didn't work.
For the past few days, I have been trying to research how to be able to connect to my Airport Extreme, and I have had no luck. Apparently, there is some sort of driver that I have to install called b43-fwcutter, but I have no clue where to find it or how to install it.
Btw, the iBook obviously isn't the only computer I have, so I am able to download necessary packages on other computers, and transport it with USB flashdrives.
I have sometimes use my PC for games, thus i need EAX support from this. Linux X-Fi drivers works well, exept it's prevent my system to go S3 standby. If i do blacklist snd_ctxfi suspend works after reboot.
i've been having some problems the last few months with my server/apache getting really slow (pages loading slow) and the only way i can fix it is to restart apache which is quite annoying and is not fixing the problem but it gets to the point where pages are almost not loading so i have to keep restarting apache but after 2mins it'll be slow again and once again i'll have to restart apache...i forgot to say that memory usage is a little higher then normal (500mb-700mb compared to 250mb-300mb - but goes back to normal after restarting apache) and the load is also a little high but always under 1 (also note my server is on a 100mbits port and i can easily push 100mbits 24/7 with no problems at all so it's not bandwidth)
I bought a Rampage III Extreme Black Edition wich has a SATA III controller (Marvell 88SE9182). I try to install Fedeora Core 15, but FC15 just dont recognize any of my HDs placed in SATA III ports. Has any fellow succeed installing linux on this SATA Controller?
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info: monitored server: CentOS 5.3 2.6.18-128.1.1.el5
how can I check how fast is network connected to my server ? I mean upload/download. I have an access only to command line. Is there any nice command for this?
I need to know is there any way to record or tracking or make logging if when user samba delete files or folders i can know that, cause sometimeon samba server some users complain they lost files, though i have daily backup and i can restore their files, i just want to know if or maybe some other users in one group accidentally move or delete the files.
I have CentOS 5.5 x86_64 with Apache, php and mysql. I have just installed OTRS (helpdesk - trouble ticket system) on that server and no users. This system works with perl, apache and mysql. I notice that is slow to respond and at times unresponsive the apache welcome page. code...
A Linux (CentOS5.3) server is setup with apache reverse proxy. The reverse proxy server is opened to outside and an internal server is mapped to ProxyPass configuration. SSL certificate is also installed on the Apache reverse proxy server. The problem is, it is extremely slow in serving http requests through reverse proxy. There is no problem with server resources or bandwidth. When the internal server is directly accessed through Internet, there is no delay. The backend server and the reverse proxy server are also on the same switch (same subnet). When I searched the Net, there were recommendations to enable cache in Apache. I did so as follows in httpd.conf.
But still there is no progress. Do I want to enable cache in ssl.conf too? Or is there any other workaround to speed up Apache reverse proxy. Is there a way to check that caching is happening?
I had a F14 samba server working flawlessly now for a quite time. Unexpectedly about a month ago the write speed slowed down around 64kbit/s and that's really slow. I haven't changed any configs, only updated the server. I've troubleshooted this from many angles: -It is not a network issue because sftp writes are good. -It is not a RAID1 issue because write speed from another directory (locally) are good. So basically samba is the only thing left.
Here's example from smb.conf: [MyShare] comment = My share path = /mnt/RAID_share writeable = yes browseable = yes writelist = +smbuser
Here's a snip from logs today: [2011/08/04 09:04:27.509273, 1] smbd/server.c:267(remove_child_pid) Scheduled cleanup of brl and lock database after unclean shutdown [2011/08/04 09:04:47.526336, 1] smbd/server.c:240(cleanup_timeout_fn) Cleaning up brl and lock database after unclean shutdown [2011/08/04 09:17:57.634660, 1] smbd/server.c:267(remove_child_pid) Scheduled cleanup of brl and lock database after unclean shutdown [2011/08/04 09:18:17.635196, 1] smbd/server.c:240(cleanup_timeout_fn) Cleaning up brl and lock database after unclean shutdown .....
I'm trying to set up a fileserver on my 10.04 machine, and access the files from Windows 7 via wifi. I can see everything alright, but the transfer speed to Windows never gets higher than 70KBps. Both computers can access the web at 800+KBps. I've also checked with an OS X machine on the same network, which was also extremely slow, so I'm fairly sure that the problem is on the server's side.
I have set up a file server (Ubuntu Server Edition) for our lab. People can connect to common Samba file shares from their personal laptops/desktops, which run either Windows Vista or Mac OSX. The guys with OSX have upload/download speeds of ~2 MB/s, while the Vista machines are slogging away at ~200kb/s for downloads and ~400kb/s for uploads. In both cases, the connection are through wired ethernet ports which should function identically. Since the Macs work fine on the same network, I assume this is a Vista issue.
I have tried troubleshooting one of the Vista machines by: 1. Turning off the Remove Differential Compression feature 2. Disabling autotuning following these instructions 3. Adding a registry key following the same link above.
But nothing has improved. Anybody have any advice on addition tweaks to the Vista machine? Is there a chance that this is actually a server-side/samba issue?
We use Magento for our online shopping cart, and one of the things we've been focusing on is how to make it faster. Magento is known for being slow sometimes, although there are things that can be done to help with that. One thing I'm wondering is whether the Linux distribution we're using can help speed things up a bit. Right now we're using Ubuntu. I've been wondering if Gentoo could help, since it can compile everything and allows for good optimization when compiling and installing software. I had used Gentoo myself for a little while about 6 years ago and noticed it seemed a bit faster than other distros. My question is, what would be the fastest Linux distro for a web server?
Problem: I run WPA2 Personal encryption on all my wireless devices. At work we use Cisco WAPs and I can connect flawlessly, simply by entering the password. At home I use Apple's Timemachine, which is basically an Airport Extreme A/B/G/N router.
I go to Network Manager and choose "Connect to Hidden Wireless Network". I enter in the SSID of my home wireless, choose WPA2 Personal, and enter in the password. After ~1 minute Network Manager spits back a window requesting the WEP key.... But I'm not running WEP. This is extremely frustrating. I delete the network and try again... same behaviour. My assumption is that this may be isolated to Airport Extreme network devices but I'd really love to find a fix. Just FYI: I have a MacBook Pro and a system running Vista that connect without a hitch.
When i try to copy files from my samba server (Ubuntu 9.10) to my windows seven media center, the speed is extremely slow. So slow that is better to download 100mb file from the internet, than from my lan. And on my lan, every card and switch is at 1000 mbps speeds on cat5 cables. And from XP or other linux machine
Does anyone have some material about statistics using ubuntu / linux server, or a text which generally describes the ubuntu server?I need urgent, i'm writing specialization work about administration apache and ftp server on ubuntu 10:10 server, so I need something for the conclusion.
config my apache server to list all my files: c/c++, php, java files, like the txt file on my server, e.g /var/www/mydomain/pub i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name, if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file, Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
My wireless seems to be fast for a good 30secs then bang takes good while to load the next page almost as if it's disconnecting and then reconnecting/scanning reconnecting. Why cant it stay connected. I have WAP PSK security here is my network setting please let me know if I should change any of them:(side not is there a way to fix this problem occuring so frequently it says on the wiki that it should only occur once in a whilce https:[url].....
