Server :: Apache - Browsing The Same Website Simultaneously?
Feb 27, 2010
Doing my final year project in linux- a Mozilla Firefox extension which providing chat option for two or more peoples,who happen to be browsing the same website simultaneously. It shows you other people who visit the same websites as you are. These people have to be registered with our software. I don't know how to go about this. After a lot of googling and enquiring i have divided the project into three modules: an extension at browser side, chat implementation (probably in ajax) and a server- apache-php-mysql.
The extension keeps track of the URLs visited by the browser. It sends this information to the server. When it receives information from the server, the extension displays the number of users visiting the URL as the user. The extension informs the server whenever the user clicks the EnableChat(which will be embedded in a toolbar in the browser) button to start a chat session. After receiving the information, the extension displays the users in that site. The user clicks on a particular username for chat.
I have installed php mysql and apache. but i do not know exactly what the server must do. I know i have to write the server code in php and put it in the /var/www folder. but what should that code do? how exactly does the extension or browser communicate with the server for the exchange of above info?
config my apache server to list all my files: c/c++, php, java files, like the txt file on my server, e.g /var/www/mydomain/pub i want to dump all my c/c++, php, java file under the pub directory and I can access it from my domain name, if I dump txt file, I have no problem to view it, but when I dump c/c++ or php files under pub directory, then I can't view it like regular txt file, Q: is there anyway I can configure my apache server to view all the c/C++, php, java file as like txt file?
I'm running Ubuntu 10.04 with apache, rails, mysql, etc. My rails site is running at www.example.com. I'm intending to use named-based virtual hosting and I have a virtual hosts file configured/enabled for www.example.com. My site is hosted on Amazon EC2.
The problem is that if I set up a new DNS record -- say test.example.com -- and browse to that, my site www.example.com is served up! That's without configuring any new virtual hosts. And the same is true if I go to my DNS records and define test2.example.com, etc. Without touching my server, these new URLs serve up my website. That's not what I want! I want to use name-based virtual hosting and host different sites for each subdomain.
[Code]...
UPDATE: now I understand a bit more... apparently my real problem is not what I thought it was. My real problem now appears to be that when I copy this virtual hosts file and edit it to add a new subdomain name, set up the corresponding site, etc., and enable the virtual host (a2ensite) and restart (graceful), apache immediately stops serving up any websites. Apparently apache crashes although I do not see any error messages. But all my sites go down and I have to revert and then restart apache.
I thought this was because my virtual host file (pasted above) had an error. So I thought I would start by getting that first file right. Apparently it is right. So now I need to understand why adding a second virtual host causes all sites to stop being served up.
I'm trying to setup an Apache server on my computer which will allow browsing of files in a specific directory and subdirectories, without needing any sort of authentication.
I've got the Apache2 server up and running through yast, and everything works fine as long as I try to point it to the /www/htdocs folder. However, I want to point it at another folder, which is on another partition. This partition is formatted as NTFS, if that matters at all (here's some background on some permissions issues I had with the NTFS partitions recently).
When I change the "Directory" setting in the Yast http server configuration utility to the directory on the NTFS partition I wish to use, attempting to access the server results in the following error:
Code: Access Forbidden: You don't have permission to access the requested directory. There is either no index document or the directory is read-protected. If you think this is a server error, please contact the webmaster.
Error 403 192.168.1.100 Mon Jun 13 23:43:29 2011 Apache/2.2.17 (Linux/SUSE)
I am trying to host a local website(an wiki application) within a network. Is it necessary that all the files I need to upload should be in the var/www?
When browsing at the main page of [URL] firefox uses 100% of my CPU capacity. I have the flashblock addon installed, which allows me to control whether embedded flash applications are run or not, so it is not due to flash.
I am running opensuse with LAMP, and this is my first time setting up this type of server (usually am a windows junkie) My problem i am having is that I am unable to view my website from outside the local network. I have setup my router for a dynamic dns and forwarded all the ports through the router and the local firewall. I ran the apache setup through YAST2 and everything seems fine locally but when i attempt to access it elsewhere its not connecting. computechsolutions.dyndns.biz is the dynamic dns address i have setup through my router.
I have a web server in my kitchen with apache running on it. Since the upload speed is quite low due to my isp I would like to execute a bash script that uploads a file to another server through a website (which is htaccess protected) The idea in general: Someone with access to my website browses through a folder, copies a file path to an input form and presses "upload". Rather than executing a bash script directly I could have a cron job running in background that finds the path and then uploads the file to the other server I have userspace on and is accessible via sftp/ssh. The file would be than erased later after a couple of days or so. That person would be able to access the file with higher speed some time later without logging in via ssh and doing all that manually.
I am facing a problem in browsing website with F15 installation, both firefox and chrome browsers give me a headache. The main website that cannot be accessed is facebook.com, I only can browse it in certain of time after clearing cache, cookies and histories, this only happen for facebook web only.
My webserver accesses a backend mySQL server using CentOS5
The last week, I have been getting a "page Load Error" on my web server whilst others told me they are getting a "broken link" error when they try to access my web site. It has been working fine for the last 12 months until last week.
ADSL, modem and router okay according to service provider (verizon)
I can ping my IP address and my domain name.
# netstat -tap
shows http and https both processes running.
# service httpd restart no issues
I shut down firewall and tried again, but got the same "page load error".
So I have apache running on my local computer. When I open up local development sites in tabs in my browser, apache threads are started. That's as it should be. However, when I close the tabs, close the browsers, and then run system monitor/system task manager, I get a long list of apache threads that are sleeping, waiting around for god knows what. How do I get these apache threads to stop hanging around?
I have web server apache on linux Centos. I can access it successfully by typing on the address bar http://localhost, 127.0.0.1 or 192.168.0.150 from the local computer server and the site loads normally with graphic. When I access the site from another computer in the same local network, I don't get the correct website. I see the site like html as text not graphic. Please see below text file output from the browser: Also I can only access the site by typing 192.168.0.150 IP address in the address bar. When I type http://localhost or 127.0.0.1, the site does not come up. Do you see what I did wrong? How can I fix this problem.
I am very new to using Linux. I am trying to configure Apache. I have located the default in /etc/httpd and did a yum install httpd. Now, with this done, I am lost as is to how to configure. I am trying to make an ssl website with apache.
I have a LAMP server configured. Yesterday, I had a test.php file displaying everything fine. I transferred some files over to the new server and now I can't connect to the test page, webmin, or phpmyadmin. I think it has something to do with Apache but Im not sure what to do next. I have restarted Apache, MySql and all services are running.
I was able to install and setup Apache on my mint box. I created the site and it was visible to me using the localhost and home address. My instructor tried to view it from his machine and it timed out. I tried to view it from an unused Windows box in the classroom and it was unreachable.The instructor could not figure out why this was happening. The class is using about 4 different distros. There are only 2 of us using Mint and the other guy was not in class. We usually help each other outMost of the class had no problem when the instructor went to view their pages. Some had firewalls issues that were easily remedied. He was stumped when it came to my issue.So what may be going on here? Are there some specific things that need to be done with Apache on a Mint distro that I'm missing? Ubuntu, Opensuse, and Fedora all almost worked without tinkering around
I have Ubuntu 9.1 setup, with ISPCONFIG3, squirrel mail, apache2, mysql, phpmyadmin, phpbb3 so now what, what do I need to do next to setup to get apache to display my website and where do I need to put my web files?
In my website, I'm putting shared files in a "/global" folder. Both "styles.css" and "library.php" are in this global folder. HTML code seems to be working ok - the following bit works great to pick up a style sheet:
Code: <link rel="stylesheet" type="text/css" href="/global/styles.css" /> However PHP does not seem to understand my root directory. Using the following does not work: Code: include_once("/global/library.php");
I receive a "failed to open stream: No such file or directory" error.Spelling out the entire full path works, like so:
But this type of code is no good as I may change servers in the future. I have my "DocumentRoot" set correctly in my sites-available file. It seems as if PHP is ignoring it. Is there a config file someplace (htaccess? Local php.ini?) where I should update my root directory for this site only? Or am I following bad form and there's a better way to do this? Relative paths don't seem like the answer here though...
I've installed Ubuntu server and got everything setup pretty well.My problem is apache.I put my website in /var/www and changed the security on the files to allow them to be executed by other, which is what I finally discovered was my first problem (access denied). But now whenever.I go in and edit my page, the changes aren't reflected on the site unless I completely restart apache.I know I'm doing something wrong because I used to pay for a host and every time I edited a page, it was instantly updated on the site. Could one of you gurus tell me where I screwed up?
we have a dual server setup: Windows server 2003 and Ubuntu 10.04 with apache installed with all the goodies. This is all virtualized. What I'm wanting to do, is make the new website we've created run on the Ubuntu machine, which it is, and be accessible outside the office. However, by doing this, we forfeit being able to use remote access or web exchange on Windows server 2003.
How can I create a link from the new website on Apache point to the internal server and it work outside of the office?
I have a server with a couple of sites on it. Some of them have a webform where people can send them emails that they are interested in their work etc. though the "To:" and "From:" adress can't be change by the enduser, you can only enter text and press send. However it seems that someone (not on the server) has found a hole/exploit to use those webforms to send mails to who ever he wants.. I have the webserver setup with ssmtp (simple smtp) and it just forwards the mail sent from the server to my mail-server and there on it sends it out on the internet. If I check my log on the mail-server I can see the whole smtp session, where it's comming from and where it's going etc. I see that it comes from my webserver and over there I only have these log entries:
Oct 6 22:04:47 ettan2 sSMTP[1771]: Sent mail for itaumail@itau.com.br (221 2.0.0 Bye) uid=204 username=torget outbytes=3290
There are loads of those log entries, mostly at after office-hours between 17:00 and 7:00 I have scanned through all the Apache logs and can't find Anything that point to the e-mail addresses used or something like that. The reason I found this out was because he tries to send to a host that doesn't allow connection on port 25 so all the mails got stuck in the queue, over 1000 atm.. I'm using Apache 2.2 and Postfix 2.6 on a Debian Lenny install. What can I do to find out how he's doing this and close the "exploit"? Who would you recommend to setup the mail() thing in PHP for most security?
In first place i am sorry about my horrible English. I want to make a web site with a virtual host of apache visible by all the computers connected to my networking. I put this in the end of the file "/etc/httpd/conf/httpd.conf"("192.168.1.194" is the IP address of my computer. The default gateway IP address is "192.168.1.1"):
[Code]...
It works if i go to "http://192.168.1.194/" with the browser of the computer with apache inside, but on the others PC of my networking this method don't work!
Where would I go to find a guide on a how-to for Linux website administration? I want to learn how to create a simple site dedicated to my blog. I already have a blog hosted by wordpress. I want to learn how to administrate my own blog using Apache hosted by GoDaddy.com or some other host.
I am trying to solve a problem where Apache stats aren't displaying correctly in Munin. I've ran through quite a bit of checks and tests regarding Munin setup, but I think my issue is related to Apache, but my skill set there is lacking.
first, system info: monitored server: CentOS 5.3 2.6.18-128.1.1.el5
I want to install a DLNA server on my ubuntu home server. It will primarily be used for photo browsing on my PS3, but general media support would be nice. (I use Squeezebox server for music.) What are my options, and what are the main difference between them.
