I have 3 linux systems configured for running applications in each, named system1, system2 and system3. I have around 100 GB of space in system3 under /usr but not much being used. In System1 very less space is there but mostly hits coming here and need to have proper backup, as the system1 is quite old and not planned partitons properly. So I want to use a disk having more space for backup requirements.
View 17 RepliesI was looking for:how to access my Linux machine(OpenSuse 11.3) that is being hosted at my hoster company from my home Win Pc, I found TightVNC , but I am confused, should I install it on both systems ( viewer and server) ? .. what about the VirtualBox , can i Access with that tool or it is only for mounting the local Virtual Machines?
View 2 Replies View RelatedWe recently had an issue with "cat /proc/mount" telling us that a CIFS file system was mounted, even though the mount was not working correctly. So we're not sure if we can trust linux to report malfunctioning mounts, so we're planning on adding a specific file on the mounted file system, and verify the mount by reading this file from the client side (linux). If linux fails to read it, we know that the mount have failed. But before we go ahead doing this I thought I'd just hear how others are doing this sort of thing - how do you make sure that mount points are up and working?
- kenneho
EDIT: I just saw that I've posted in the security area, not in the server area. How do I move it?
I restore tape backup on my Linux server. At the time of booting the server it cannot able to read the filesystems.
I am getting the following message,
Code: Your system appears to have shutdown uncleanly
Forcing file system integrity check due to default setting
Checking root filesystem
fsch.ext3: file system has unsupported features (S) (/)
e2fsck: Get a never version of e2fsck! (FAILED)
*** An error occurred during the file system check.
*** Dropping you to a shell; the system will reboot
*** when you leave the shell.
Give root password for maintenance (or type Control-D to continue):
I am still puzzled by IT guru who still install a server version of Linux using the default partition system. I am curious about what the IT guys in this forum think about this, even when the server is part of a cluster.
View 1 Replies View RelatedI have installed VMware on Red Hat.Even after getting the following message, I am not able to see the GUI of VMware.
tarting VMware services:
Virtual machine monitor [ OK ]
Virtual machine communication interface [ OK ][code].....
We purchased a new database system at work last October, ditching the old system because of a lack of support from the vendor. This is a retail Point of Sale and Backoffice database system. I am not sure what system the new one runs on, but the system we replaced was a Firebird data base. The reason I am posting is because we are now in need of the information contained in the old database which was not completely imported into the new system. Unfortunately, we parted company with the old vendor under extremely hostile conditions, and they are not a source of help for this problem, nor are the new vendors.
Basically the problem is this: The database in on a Windows XP system and I found a copy of SQL Manager Lite 2008 on the system, which after quite a bit of studying, I figured out how to extract the database into a removable file. I have this file (178MB) on a USB stick in a file called Backoffice.fbd. I can get into this database with MySQL. All I want to be able to do get into the database and create tab deliminated spreadsheet files for each of the database sections (Customers, Repairs, Sales History, stock files, etc.) Is it possible to do this with Ubuntu and MySQL and if so, can an expert suggest one or two things to get me started.
How to kill the processes accessing Internet in background using terminal commands.Command to stop (disconnect) the processes accessing Internet.Command to kill the process accessing Internet.
View 1 Replies View RelatedI just received a 2 tb drive for my server to be. The pc is a P4 3.06 ghz with 4 gb of ram. I have found a number of posts on this forum, as well as on the net in general, about setting up a file/print server at home. What I want to be able to do is to access my server through the internet from my office computer (windows 2000) How can I do that? I have not yet spent much time trying to decide which distro I will use. It seems that a number of them are suitable for this purpose, so I just plan to try several from a live cd and then choose one.
View 1 Replies View RelatedIm trying to install a trading program fx trading station II on a dedicated virtual server that's linux based at media temple. Any ideas on how to run the program so that the exe file isn't prompting to download the file instead of prompting the user to login and trade?
View 2 Replies View Relatedi have generated .exe file from C file (ie filename.c ) after compiling in linux machine with -O option. I wish to know about how to run that .exe file when linux system starts up ?
View 3 Replies View RelatedI am trying to check what all processes are accessing a particular file (a UDP socket in my case) on a filesystem.I am using 'fuser' for that.But, it seems, it only gives the processes accessing the file at that particular moment.Is there any way to continuously run 'fuser' (or some other command) which will give all processes accessing the file during its run?OR is it possible to generate a filesystem alert when a particular process accesses the file?
View 1 Replies View RelatedI have 2 different mounts. One points to a local windows share(NTFS ->Samba) and the other one points to a PPTP VPN connection sharing(I belive that is NTFS too). I use "cifs" scheme in my fstab to mount these. And I use my Debian box to copy between these 2 mounts. I have started using Rsync for that purpose, I think that it works fine for now. My main problem is that it looks like Rsync cannot figure out if the files are same or not in source and target folders when I use these mounts. Most of the time Rsync copies the same files and folders over and over again even though those files and folders are on the target.
I am wondering if there is a way to make this scheme work? Being on a Vpn connection(slow) a Windows box, Rsync could have save a lot of my time if it could have recognized the files and folders that are same on both ends
Last year I was looking into fault-tolerant distributed file systems and I recall one kernel-based system that required a physical partition on each machine in the cluster, but would treat it as a single volume - ie. a write on one server would appear on the disk on all the servers.Unfortunately I didn't bookmark the specific system I was looking at, and now a year later I can't remember the details.What I don't want is NFS - a single file server with a file system mounted on various machines. What I do want is mirroring - one disk shared among multiple servers, so that if one server dies, it doesn't make any difference to the rest of them.
A bit of investigation turned up Red Hat's GFS, which kind of looks like what I want, but looks more and more like an NFS model to me. I was wondering what everyone's opinion of the various options out there were.
How to get the permissions of any file systems
---------------------------------------------------
what does it mean?
"permission denied while opening filesystem"
through commands can we give/get permissions of file systems
On linux, is there a way to count the number of file descriptors open to a some file?
View 1 Replies View Relatedi should install a old version of Java EE, so i can write code for a old kind of webservice. Here's what happens:
Code: michael@michi:~/Downloads$ ./j2eesdk-1_4_03-linux.bin./j2eesdk-1_4_03-linux.bin: error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory I looked for the library in Synaptic, but there are only newer versions of libstdc++. I couldn't find a solution to this problem i was able to follow.
Right now i have a HP DL 180 Server with 130 Gb Hard Disk & 8 Gb ram after Raiding0+1. i want to configure Domain Controller Server for my office for 200 to 300 Users. what should the partition size must be mentioned in my 130 Gb Hard Disk, is that going to be Sufficient for ME ?
i am bit confused about /Usr /Var /Boot partitions, as i need to manage perfectly in 130 GB
if i go with 4 Gb swap and remaining for " / " is that will be fine ? should i need to specify partition sizes separately for / tmp /var / usr ..
I have fedora12 on two pc's, i want to share some files between them which i was not able to do with nfs, so let me know the whole procedure to do that n also let me know where my shared files will be visible
View 10 Replies View Relatedduring the boot process mounting other file systems takes a while. Although it ends up resulting [OK] it was not like this before and it used to be was very fast. I took a look at /etc/fstab file which is posted below, and suspected that devpts is the problem. So I commented it out and reboot, but it wasn't helpful.
[Code]...
After an update recently I noticed that my process count jumped up quite a bit. Somehow it doesn't seem related (it was an apt update I believe), but I'll just throw it out there. All of the extra processes seem to be related to XFS and JFS file system kernel processes, but none of my file systems use XFS nor JFS, just EXT3 & EXT4. Is there any safe/easy way to kill off these processes and prevent them from re-spawning? I don't find having irrelevant idle processes to be beneficial nor efficient. It's using Ubuntu 10.04 64-bit. Only active file systems are EXT4 and EXT3.
[Code]...
and also I need to find answers for following two questions.How to find mountable devices and their device files in Linux?How can I allow a regular user to mount a device in Linux?
View 2 Replies View RelatedI'm familiar with the software and hierarchy of the mount command but I can't find any info on why it is needed or preferred. What are the physical aspects of it? What is the burden of having files accessible all the time?
View 14 Replies View RelatedI was wondering if it was possible to hide the File Systems from a user. So when then browse through folders or choose to save something the default folder is their "home" folder. I am using SAM Linux distribution and don't want my users to be able to screw anything up! I use thunar as my file manager and was just wondering if it is possible?
View 12 Replies View RelatedI have to move files between two file systems /inst and /inst2.When I perform 'cp -a /inst /inst2' it copies everything even hidden files and preserves access permissions.But when I perform 'mv /inst /inst2' it also preserves access perms and moves everything besides hidden files.Questions :hy is so ?What tool to use when moving file systems from one fs to another (rsync) ?
View 8 Replies View RelatedWe have upgraded CentOS release 5.6 (Final) with 2.6.18-238.9.1.el5 kernel. After the reboot all configuration files under /etc became READONLY. my file system's still in rw mode.code...
View 2 Replies View RelatedThis post is not to ask for help, but rather to document my recent effort to downgrade my ext4 file systems to ext3 file systems. I don't know if it'll help anyone, but here it is anyway, fwiw.I am running ubuntu 9.10 on an older Dell GX-270, and had formatted my partitions with ext4 file systems. I began to notice partimage wasn't backing up my ext4 file systems and I decided to downgrade to ext3 file systems.My system has one 160GB drive and one 500GB drive. I also have an external usb2 500GB drive./home is on the internal 500GB drive. To convert it, I mounted an ntfs file system on the external drive, created a container file, put a file system on it, and mounted the container as a linux file system.
The backup was done done via rsync. rsync makes things really easy. It understands uids, gids, file permissions, and all kinds of links. That's one reason I created the container file on my external drive. NTFS doesn't understand uids gids, linux file permissions, or linux style links.
I have more than 60 ubuntu systems in my network. I want to copy files from one system to other ubuntu systems. All IP addresses are listed in a text file. So what command can I use to complete the task?
View 6 Replies View Relatediv been looking around at the different Linux systems particularity the smaller ones such as DSL, Slax and Puppy Linux. However i need a Linux distribution that doesn't have a GUI desktop environment just the plain old terminal to work on. The system would have to be able to boot from a USB drive also. If anyone knows a systems that fits those requirements or something else related please post. Also what file system is best for USB drives for booting systems?
View 4 Replies View Relatedafter reading a lot I was finally able to run the upgrade interface (no more root errors) but I get a new error:"You need mor espace on the following file systems:346M on On / I have 760mb free. I dont know what else to do to install, I though I just needed 250mb to upgrade. Post added at 08:37 PM CDT Previous post was at 07:20 PM CDT Well after unistalling a lot of apps I managed to free 900mb in total.I dont know why my / is so full, I arranged a 9gb for it, and apparently I need more space, Im not using it more than sharing and downloading files, some hosting (nothing right now). How can I now what is getting so much space? Or maybe is the hole update process, from 8 to 11 and now from 11 to 13...
View 1 Replies View Related