my team is working on network thier termial is windows and my server is linux centos we work on simple network with out domainmy user works on files on the server, can I deman ser name and passwork when they try to change to the shared files on the servernd can i monitor which user chaned a fileI have css developer and he is only allowed to create and modify css files can i do this ?
View 3 RepliesI'm trying to tighten up my network a bit. I've given my dhcp server a list of static mac addresses and ip's for computers i know, and a very short range of dhcp addresses that are redirected to kittenwar.My dilemma is that if someone has my wireless network password, or an ethernet cable, they could set the ip address manually and gain access.how can i deny them this pleasure?im running dhcpd3, and iptables on a debian/lenny intel 2.4 box. dd-wrt is running in a linksys wrt54g and is handling the wireless security
View 7 Replies View RelatedI heard we can set security in /etc/hosts.allow and /etc/hosts.deny on user base also like something user@domain or something if so how can I restrict a user to access particular service by his/her user name in a particular host via /etc/hosts.allow or /etc/hosts.deny
View 3 Replies View RelatedI'm running Natty and have made two logins on the system. One for myself and family and one for the kids (teens 14-15yr) to play in without Internet access via Admin "Users and Groups". I have hidden the Internet software icons on their screen amongst others i don't want them to see on the menus. On our screen I use a Firefox addon called "Web Of Trust" that can be configured easily for the kids and another addon called 'Blocksite' that I can selectively use for them and myself etc.
I have found out that they have still been able to get on to the net somehow under their login. Will have to observe again!! In the users settings for the kids the tick box for 'Internet'and 'use modem' access is un-ticked so I presumed that would be enough! Not so!!
I tried changing the sftpserver port but its not working, besides how can i restrict users from particular ips.Eg: users a can ssh from 192.168.*.*user b can sftp from 200.*.*
View 2 Replies View RelatedI have been trying to get Squid to work so that I can restrict access to a particular web site during certain hours every night. I can't seem to get it working, however. I am still able to access the site. The following are the relevant lines from my squid.conf file:
acl restricted-domain dstdomain "/etc/squid/denied_domains.acl"
acl test time 19:00-20:00
acl bedtime time 22:00-23:59
[code]...
I am trying to configure my Linux router to restrict Internet access for one computer on my LAN. It needs to be restrictive based on the time of day and the days of the week. I am using the MAC address of the computer to single out the one computer that needs to be blocked. However, this is my first attempt at making any rules with iptables, and I am not sure if I am doing this right. If some one can take a look at this I would greatly appreciate it. This is what I have done so far.
Here is my thinking. Create a new target. Check the MAC address, if it is NOT the offending computer return to the default chain. If it is the offending computer check that we are between the allowed hours and dates and ACCEPT. If we are not within the time/date range then drop the packet.
Code:
Here I am trying to route all packets regardless of the computer on the LAN into the blocked_access chain for checking.
Code:
Is it a good idea to route all traffic through the blocked_access chain? I do run other servers that are accessible from the Internet, so I am not sure how this setup will affect that. I also use shorewall on the router to setup iptables for me. How would I integrate this with shorewall?
I am using squid to block access when he is using the web browser. However, he is still able to play games(World of Warcraft) and the like.
I am using Debian sid, iptable(1.4.6), shorewall(4.4.6), kernel 2.6.32-trunk-686.
Installed a security update for samba tonight via Opensuse updater.Now, when trying to access my home network an authentication box pops up (never used to)Asks me to enter authentication for my home network.I enter my username and password and hit enter. After a few seconds the authentication box pops up again askingfor the same indicating I have entered the wrong username / password combination (which I know I have not).
View 9 Replies View RelatedI'm a terrible procrastinator, it's awe-inspiring annoying and stressful. This in combination with being a information-holic makes the Internet fairly lethal to me; I risk failing my college course because of it, so trust me when I say I'm deadly serious about this.
However, I think you guys may be able to help out, and maybe this will also help some people here with similar problems:
Because so much of my time is taken up with Interwebz, I thought to carefully restrict my internet use. It's not prefect, but it's part of a solution.
To date: I have Firefox and the ProCon extension which uses a whitelist of websites I can access. The extension cannot be uninstalled/disabled and I use a long hex password split into 3 parts, two of which my friends have (so I have to ask my friends for the password parts in order to update the whitelist, hence making it socially awkward to fritter away time online).
So far, it has worked a treat and I'm really pleased with it.
However, this is the problem:
I need to restrict web access so *only* Firefox can access the web. That way I cannot use Chrome/Opera, or even (shudder) use wine to run Internet Exploder.
That would seem like an elementary feature to be able to enable only a few system applications access to the Internet. That would prevent trojans to download your HD for examples. I looked around and played with iptables but I couldn't not find anything that do the job. I loaded the xt_owner kernel for iptables but the --cmd-owner command is lacking. That was my holy grail but could not get --cmd-owner to work. iptables -I OUTPUT -m owner --cmd-owner "firefox" -j LOG --log-prefix "Testing " How can I protect my machine against the enemy within.
OpenSuse 11.2
Kernel: 2.6.31.12-0.2-desktop
Is it possible to remotely access, inject, manipulate files and/or folders in the Windows NTFS partition when logged into Ubuntu?
I'm either logged into Windows or Ubuntu but NOT both -- ever. Therefore, while logged into Ubuntu, would it be possible for someone to crack into Windows via Ubuntu using Wi-Fi or modem?
I m new with Fedora 14, and i have a basic business case :
I want to setup a user which should
- only connect to the server with SSH (ex.: no X11 connection).
- cannot change its shell
- cannot do any SU / SUDO command
This user is very similar to a SERVICE user, as I expect him only to run a single program (its shell).
I've installed Ubuntu Desktop Ed 9 and I want to add a user account that would be very restricted. I would only want them to access the internet and run several programs. I do not want them to have access to the destkop, anything under preferences, administration etc... Is this possible?
View 1 Replies View RelatedNeed to restrict cvs login from specific IPs
in file /etc/security/access.conf
+ : builduser : 10.200.2.1
Do not work
when changed to ALL as below it works
+ : builduser : ALL
I would like to allow a user to login through SSH but with different permission coming from different ipaddress.
For example, a user "tester" login to SSH through 192.168.1.1 and another user login with the same login id "tester" but from different ip 192.168.1.2.
How do I restrict 192.168.1.2 to only allow for viewing the content in the home directory while giving 192.168.1.1 full access?
Here's the beginning of the issue: I'm running Fedora 12 with httpd and sshd. I want to create a user with a scponly shell for sftp access, but this user should ONLY be able to view /the/http/base/dir and its subdirectories. The user should not be able to see or get into directories above the httpd base. Someone mentioned creating a chroot jail for sshd and binding the httpd base to that dir, but this seems like more work than is necessary for the application I wish. Also mentioned was creating a user, say user1 with a selinux user setting of staff_r. I have read the articles and creating a user of staff_r isn't overly difficult, but how would I make it where staff_r would be restricted to where I want them to be? If I'm not mistaken, that would require changing the context of /the/httpd/base/dir?
View 4 Replies View RelatedI want to restrict user for SSH Logon, but able to use SFTP.
Also, i like to know how to restrict a user on SSH from everywhere except one host.
I'm running Ubuntu Server 10.04 32-bit.I'm looking to find if there is anyway I can lock down ubuntu so that remote access, whether it be SSH, ftp, apache.etc can be only accessed from a certain IP range, or a certain set of IPs?Essentially, we'll say the Server IP is 192.168.1.32, and I want the IP addresses 192.168.1.33-50 to be able to access the server, but no other IPs.I am in a switched environment, router's are not allowed to be placed on the network, and I do not have access to a DNS or DHCP server.Is there a way to do this in on the server via a configuration of some sort?
View 3 Replies View RelatedIf there is a general NFS share in the LAN and for example this share has three files - a, b, c is there any way to restrict file access to the root user of e particular host(falcon) in the same LAN environment while the normal users from the same host(falcon) should be able to access the NFS share & files a, b,
View 3 Replies View RelatedI have a question in Samba and would like to ask you for the solution. Is there anyway we can restrict the SMB share access to particular domain name? say allowing access for "example.com" domain users only.
View 2 Replies View RelatedIs there software that is available that restricts access to ssh and sftp in a similar fashion as Chroot?
View 1 Replies View RelatedIs there a way to set the permissions on files and folders from a Windows server or workstation? The partition is NTFS and is mounted as NTFS, but whenever I right click on a file or folder on the Ubuntu server from a Windows computer and try to change the permissions I get "Access Is Denied".
View 3 Replies View RelatedI want to restrict SSH so that its only accessible via the machines I own on this network. Obviously need to secure user authentication/host authentication, that aside though is the following sufficient at a network level given technical users also use this network? IP addresses are static, though I know they could be spoofed.
Code:
Chain INPUT (policy DROP)
target prot opt source destination
existing-connections all -- anywhere anywhere
allowed all -- anywhere anywhere
[Code]....
I have created my own custom ubuntu distro using the alternate installation cd and doing a command line install. I'm using ubuntu 10.04 as my base and am also using thunar as my file browser and am trying to create a secure desktop environment and to do that I'd like to restrict thunar to a certain partition. Is it possible to do that?
View 9 Replies View RelatedI would like to allow a user to login through SSH but with differentpermission coming from different ipaddress.For example, a user "tester" login to SSH through 192.168.1.1 andanother user login with the same login id "tester" but from differentip 192.168.1.2.How do I restrict 192.168.1.2 to only allow for viewing the content inthe home directory while giving 192.168.1.1 full access?I got a suggestion from some oneApproach 1) Based on the ip you change the shell. If it's just for read only ajail would be fine.but how do I change shell based on IP?Approach 2) to have two ssh instances. Let's say port 22 and port 24. Port 22 isfor read only, while port 24 is for full accessso how can it be possible to give port 22 only read only access to SSH
View 1 Replies View Relatedif i want user should`t have more than 20 sftp connections to a server,is there any way we can limit no.of connections to a particular user on the server using ssh configuration
View 7 Replies View RelatedI want restrict telnet session to users.
That means the client login one user at a time. not multiple login.
For example:
I want restrict this. How to restrict one user to use multiple login.
In a recent discussion I had, I was led to believe I could use sudoers to restrict using vi (for example) for the editing of say specific config files. I know how to allow root use of vi and how to lock it down from getting to a bash prompt with NOEXEC tag,but I can't figure out how to restrict the use of vi to only edit certain files. Tutorials and howtos I have checked don't address this
View 7 Replies View RelatedI have written a simple server application (with an HTTP interface). I want to ensure that only calls from the local machine are processed - i.e. I want to prevent outsiders from accessing/using my server.
How may I restrict outsiders (i.e. requests from remote machines)?
I will mount a nfs share on a client with fstab. Is there a way to don't allow some users accessto that folder ?
View 4 Replies View Related