I've installed Ubuntu Desktop Ed 9 and I want to add a user account that would be very restricted. I would only want them to access the internet and run several programs. I do not want them to have access to the destkop, anything under preferences, administration etc... Is this possible?
View 1 RepliesI want restrict telnet session to users.
That means the client login one user at a time. not multiple login.
For example:
I want restrict this. How to restrict one user to use multiple login.
I want the users to access servers via ssh public key only. By default they don't know their initial password and do need to change that when performing administrative tasks.For changing their passwords without knowing the old they need to switch to root for this special case.The only case it seems I don't have control is that users can not only change their password but also the password of other peoples. Does someone sees a solution (without apparmor/selinux and special /usr/bin/passwd.sh) to restrict users to only change their password?I miss the feature of using environment variables in sudoers file.
View 9 Replies View RelatedIs it possible in Linux to restrict POP3 or IMAP for particular users.I need a confirmation on this, that it is possible or not in Linux.
View 3 Replies View RelatedI was just wondering how do i restrict someone from entering other files. Like other peoples files & the system files. My users are in /home/. I am running ubuntu 10.10.So how do i restrict access to other folders. Because i dont want other people looking inside others files or messing up my linux files.
View 3 Replies View RelatedHow would i go about restricting users to there home dir in sftp and in ssh so that they can not go poking about other dir and files thats above there home dir ?Operating systemCentOS Linux 5.4 Kernel and CPULinux 2.6.18-194.8.1.el5.028stab070.5PAE on i686
Also it will have to be a low resource usage as i dont have much memory on it
Is it possible to restrict users with 'sudo' from accessing certain directories? Rather than just exclude cd and ls from the sudo privileges, that is.
View 5 Replies View RelatedI have an Ubuntu 11.04 instance running on Amazon EC2. I am currently using it as an SSH tunnel/SOCKS proxy. Most of my Net activity is on a Windows 7 machine running PuTTY. This setup is working very well. So well that a few of my friends have expressed interest in accessing it. Question is, how do I share this proxy, without giving away my private key and root access? I would like to limit users to only being able to set up an SSH tunnel/SOCKS proxy, with no shell access. What other security measures would you recommend for such a setup? I googled a bit and saw references to rbash and chroot. I have already changed the SSH port, and set the EC2 firewall to allow inbound SSH only from my ISP's address range. My friends use the same ISP. They would probably be running Windows 7/Vista, and PuTTY too.
View 4 Replies View RelatedI'd like to restricting my ftp users to access 1 particular folder.
we have a root folder called /home everyone has aces to that so they can operate.
but then there is /home/config how can i restrict certain users from access /config folder, since this is containing sensitive files I would like for no one else but my self to be able to access it.
How to prevent a user sending a mail to a particular user in an intranet mail server?I tried with /etc/mail/access file but could not.
View 4 Replies View RelatedI have Ubuntu Server 9.10 running with vsftpd and I want to restrict users from uploading certain file types (.exe, .avi) ect.. Is this possible?
View 1 Replies View RelatedI have a debian-based ftp server running that I have created a few user accounts on. I will have clients uploading files to the server via ftp soon, and I need a way to restrict their access to only their home folders. I am not familiar with chroot, but from what I read, it can be used to restrict a user to their home folder, and that sounds perfect. How can I do this?
View 4 Replies View RelatedI am not sure whether it's possible or not. We running squid proxy server for our office. We restrict users using ACL to access the internet. There is some who do the followings:
1. Create a own proxy in there box who has the internet access.
2. Other users use those box as proxy and access to the internet.
How to restrict users to send mail to outside domains in qmail server, i have centos and qmail installed
View 14 Replies View RelatedI want to know is it possible in Sendmail to restrict some users from sending / receiving mail to / from outside world i.e. they should be able to send and receive mails only from local domain.
View 4 Replies View RelatedI have one Linux PC installed with Suse 11.1. In this I have created three users to get access.
Users able access their login from Windows PC via some utilities.
1. Putty
2. Xming
Users able login using both. With Putty there is no GUI. But with Xmings XLaunch they are able to get similar session as Linux Host PC. At this point of time the host linux PC will become too slow in perfarmance.
How to retrict the users not to open similar session by enablin/disabling some setting in Linux PC?
I have configured rssh 2.3 with openssh 5.8 on RHEL 5.6 64 bit to restrict the users to scp and sftp. When i try to sftp or scp it gives error connection closed. After long googling tried different solutions like add missing libraries, setuid to rssh_helper. I had full copy of /lib to /chroot/lib and /chroot/lib64 but no success. conf and log files are below for reference.
[Code]...
I want to restrict SSH so that its only accessible via the machines I own on this network. Obviously need to secure user authentication/host authentication, that aside though is the following sufficient at a network level given technical users also use this network? IP addresses are static, though I know they could be spoofed.
Code:
Chain INPUT (policy DROP)
target prot opt source destination
existing-connections all -- anywhere anywhere
allowed all -- anywhere anywhere
[Code]....
I have created my own custom ubuntu distro using the alternate installation cd and doing a command line install. I'm using ubuntu 10.04 as my base and am also using thunar as my file browser and am trying to create a secure desktop environment and to do that I'd like to restrict thunar to a certain partition. Is it possible to do that?
View 9 Replies View RelatedI would like to allow a user to login through SSH but with differentpermission coming from different ipaddress.For example, a user "tester" login to SSH through 192.168.1.1 andanother user login with the same login id "tester" but from differentip 192.168.1.2.How do I restrict 192.168.1.2 to only allow for viewing the content inthe home directory while giving 192.168.1.1 full access?I got a suggestion from some oneApproach 1) Based on the ip you change the shell. If it's just for read only ajail would be fine.but how do I change shell based on IP?Approach 2) to have two ssh instances. Let's say port 22 and port 24. Port 22 isfor read only, while port 24 is for full accessso how can it be possible to give port 22 only read only access to SSH
View 1 Replies View RelatedWe are trying to set up a classroom training environment where our SIG can hold classes for prospective converts from Microsoft/Mac. The ten machines will have /home/student01..10 and /home/linsig01..10 as users. We want /home/student01 to be able to explore and sudo so they can learn to administer their personal machines at home. We don't want them to be able to modify (sudo) /home/linsig01. I've seen the tutorial on Access Control Lists but I'd like other input so we get it right the first time.
View 3 Replies View RelatedI am trying to use apparmor to restrict my file browser, which is Thunar to only let me view the files that are in the home directory and also removable media.I tried following the apparmor sticky with no success.I created the profile and tried editing it and it either started and let me do pretty much everything or did not start at all. Would it be possible for someone to help me step by step to set up a profile for thunar that would only show the home directory and removable media.
View 2 Replies View RelatedI'm running Natty and have made two logins on the system. One for myself and family and one for the kids (teens 14-15yr) to play in without Internet access via Admin "Users and Groups". I have hidden the Internet software icons on their screen amongst others i don't want them to see on the menus. On our screen I use a Firefox addon called "Web Of Trust" that can be configured easily for the kids and another addon called 'Blocksite' that I can selectively use for them and myself etc.
I have found out that they have still been able to get on to the net somehow under their login. Will have to observe again!! In the users settings for the kids the tick box for 'Internet'and 'use modem' access is un-ticked so I presumed that would be enough! Not so!!
I m new with Fedora 14, and i have a basic business case :
I want to setup a user which should
- only connect to the server with SSH (ex.: no X11 connection).
- cannot change its shell
- cannot do any SU / SUDO command
This user is very similar to a SERVICE user, as I expect him only to run a single program (its shell).
Need to restrict cvs login from specific IPs
in file /etc/security/access.conf
+ : builduser : 10.200.2.1
Do not work
when changed to ALL as below it works
+ : builduser : ALL
I would like to allow a user to login through SSH but with different permission coming from different ipaddress.
For example, a user "tester" login to SSH through 192.168.1.1 and another user login with the same login id "tester" but from different ip 192.168.1.2.
How do I restrict 192.168.1.2 to only allow for viewing the content in the home directory while giving 192.168.1.1 full access?
Here's the beginning of the issue: I'm running Fedora 12 with httpd and sshd. I want to create a user with a scponly shell for sftp access, but this user should ONLY be able to view /the/http/base/dir and its subdirectories. The user should not be able to see or get into directories above the httpd base. Someone mentioned creating a chroot jail for sshd and binding the httpd base to that dir, but this seems like more work than is necessary for the application I wish. Also mentioned was creating a user, say user1 with a selinux user setting of staff_r. I have read the articles and creating a user of staff_r isn't overly difficult, but how would I make it where staff_r would be restricted to where I want them to be? If I'm not mistaken, that would require changing the context of /the/httpd/base/dir?
View 4 Replies View RelatedI want to restrict user for SSH Logon, but able to use SFTP.
Also, i like to know how to restrict a user on SSH from everywhere except one host.
restrict a user from seeing hidden files and folders?
View 8 Replies View RelatedI am trying to configure Bittorando and iptables using Firestarter. I have got it working but am concerned about security holes.
Let me explain.
AIUI, the Bittornado program contacts the "tracker" on various ports which (from the previously blocked connections in Firestarter) ranged from 4664 to 65532. Therefore, currently I have set this range to be open to allow downloads of the torrent.
However, this seems, IMHO, to devalue to point of having a restrictive exit policy for Firestarter since now virtually all ports are open. I can see nothing on the Bittornado client to restrict the outgoing ports although the "listening" (incoming) ports can be restricted.
I would prefer to have my system locked-down so that the minimal number of ports are open to initiate external connections so is there any way to achieve this with Bittornado?