if u use vnc real and u share the vnc to a guest and u give him the password, and after he ends the look, u want to kill him how can u do that on the xterm i know that vncconfig can do it, but i want to know if there is a way to do it by your self, killing the ip or something.
View 1 RepliesI've just installed Ubuntu 9.10 and Samba 3.4. I've shared a folder and have accessed the share from a Windows 7 client. However, I've struggled to configure the share and folder so that the Win7 client can create files and/or folders in the share. Kept getting Permission Denied errors. Finally, (using Webmin) I set the permissions on the file folder so that "Other" had write access. I don't understand why this was necessary (and how unsecure this is). I already had the write access checkbox ticked for "User" but it wasn't enough.
View 1 Replies View Relatedequivalent of "force_user" when sharing with nautilus-share? To put this question into context, I have shared out a folder with "Allow others to create ..." and "Guest Access ..." turned on via the GUI (I believe nautilus-share is applicaition behind the GUI). When Guest accounts create files or folders, I want the owner of the files or folders to be a specific user, rather then "nobody". In a Samba Server, I know you can use the parameter "force_user" in the smb.conf (under an individual sharename) which will specify the owner of the files and subfolders created through the share.
I have tried to add this parameter to the files created in /var/lib/samba/usershares but the owner of the files and folders are still "nobody" (NOTE: I rebooted the PC after making the change to the file) I have just done a fresh installation of Ubuntu 10.10 Desktop with nothing else installed (except the current Updates and the necessary components needed when sharing folders) As a follow on question, I also want to set the permissions for files and folders. To replicate what the "create_mask", "force_create_mode", "directory_mask" and "force_directory_mode" parameters do within a Samba Server.
Ever since I installed and started operating my FTP server, with a wired connection, my wireless connection to my computers has been going in and out a lot. My wireless connection is about a foot away from the router. Is it possible that the wired FTP server is pulling a lot of the internet signal away from my wireless setup?
View 3 Replies View RelatedIs there any command in Linux to kill a socket connection WITHOUT killing its parent application? For example, I have streaming server with several connected users and I want to close socket connection to one of them?
View 1 Replies View RelatedNew computer processors from Intel Corp, due out in 2011, can be disabled using an SMS "poison pill" message sent over any 3G cellular network, according to published reports.
Complete Article
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies View RelatedI've got a samba share on a linux server, connecting to it with a windows 2k3 server via tools > map network drive. The goal is to be able to use windows to change the security of the samba share. The good news is it works! The bad news is it's not QUITE perfect:
The share is called /company. I started with the following to give everyone access to everything, set the owner of the share to administrator (my domain admin on the Windows domain), and set the group owner to domain users (group that everyone on the domain is part of):
Code:
chmod -R 777 /company
chown -R administrator /company
chgrp -R domain users /company
I then mapped the drive as a regular user, and of course, can access/modify/delete/rename/create anything I want. Then I picked a folder to lock down. Let's call it /company/myFolder. I did this on the Windows server by mapping the drive as administrator (the owner), right click > properties > security tab > advanced > highlight "domain users" and "everyone" and click edit > clear all (i.e. remove all access). Go back to Linux and
[Code]..
The only issue that remains is that I am able to rename/delete "myFolder" as a regular user. I thought this was coming from the "acl map full control = true" parameter in smb.conf, but I changed it to false and verified the change and it still happens. If I remove group and world write access to /company, I am no longer allowed to rename/delete myFolder, but then I can't create a new folder. If I add group write access back in I can create files but can also rename/delete folders within /company that have --- specified for group access. Any ideas what I need to tweak to make this right?
Today I run OpenOffice.org extensions update and it freezed fter showing me that everything was successful.When i xkilled it it refused tolaunch without any problem indication.killall soffice.bin didn't report "No process found" after 1,2,3...20 times.So I tried killall soffice.bin -i
Code:
$ sudo killall soffice.bin -i
Kill soffice.bin(3319) ? (y/N) y
[code]...
the process is mcelog. When I do as root kill -9 2323 which is pid of mcelog the process is not killed. I tried doing the same from top, press K and enter pid of mcelog. doing ps auwx | grep mcelog I see there are several results. I tried killing all of them like kill -9 2355 2341 3425 2345. But re-running the above commands still shows them as running. How else would I troubleshoot this to avoid restarting of the box.
View 5 Replies View RelatedI am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View Relatedi have a linux box connected to internet using a serial port ppp0, and there is another linux box that connects using a wireless ap. how do i use nat to share the connection.
192.168.0.50 192.168.0.30
[Modem]--------[M1]---------[Wireless AP/Router]----[M2]
Private-192.168.0.20
Public-Dynamic IP
I am trying to share vpn connection between my network without any luck.
Here is how my network is setup.
Main DNS server with 2 NIC's:
Code:
Code:
My iptables
Code:
With those setting i am able to share my internet connection, however, when i try to connect to vpn server using openvpn it seem i am connect to the vpn server but i dont have any internet internet connectivity even on the dns server.
Here my openvpn log
Code:
I am wondering how I can share connection with my IPv6 connection.
I am using slackware and ip6tables so far. But the problem is that IPv6 or ip6tables has no "-t nat", so how could I just simply share Internet with the computers behind the firewall?
I have two Desktops. Both running Fedora 9 and connected to each other with a crossover cable. I have a GPRS connection via a USB bluetooth Dongle. I can connect thru rfcomm on Kppp. Assigned static ip's 192.168.10.1/2 and can ping from one computer to the other. So far so good but now I want to share the internet connection between the two computers and run into a maze of gateways and DNS and iptables and am spinning around with no clues. Some of the things I do not understand are
1. What gateway does one assign when your computer directly connect to the internet through a GPRS and not through a NIC or router??
2. When I try to load the shared NFS folder, why does it say "could not load the location: internal error"?
3. Is there somewhere I could get a step-by step instruction??
I'm trying to connect two PCs to the Internet (or at least to create a local network) using a crossover cable. My main PC (the one that has two ethernet adapters and is connected to the Internet) runs Windows 7 and my secondary PC runs Ubuntu 10.04.Unfortunately, it doesn't work. Both systems send out packages but don't receive anything. How can I possibly fix this, so that I could use LAN and share the Internet connection between PCs? Does Windows need special software to recognize Ubuntu (or the other way around)?
View 1 Replies View RelatedI have a small wireless network running IPv6 connected though a 802.15.4 usb stick, and a network connection through eth1. I can access the nodes on the wireless network from my computer, but not from any other on the wired LAN. Also the nodes on the wireless cannot see even the address of eth1. I'm guessing i have to forward all packets from the wireless to eth1 in some way, but am unable to find an guides for this with IPv6.
View 7 Replies View RelatedGenerally I don't like just asking stuff but just can't crack this one. I got a debian machine. My internet connection is on a 3g usb modem. It connects perfectly. Then I downloaded DHCP 3 and then configured it so I got 172.16.0.0 network address with gateway on 172.16.0.1 (set by DHCP) 172.16.0.1 is also the eth0 address and is assigned as fixed by DHCP. With the modem not connected the other PC connects no prob, gets the default gateway and get assigned an ip by DHCP and there is a proper connection with APACHE serving pages. So it is all grand. Where my prob comes in is that I am not able to get traffic from the modem through to the other PC, and at times the modem would not be used as default connection with eth0 up. Restarting the modem fix this but then also drop the assigned gateway address.They are connected directly via crossover cable. The modem is setup as ppp0 according to ifconfig and then ethernet as eth0 and I tried some masquerading allowing all traffic through but does not seem to do the trick.
View 1 Replies View RelatedI have one Squid server which was configured to share internet on our networks192.168.20.0) PCs Serrver:192.168.20.25:8080It is working smoothly.Now my problem is that I has to configure one sub server that should allow internet to our 192.168.22.0 network with 3128 port. The sub server will get the connection from main server and it share the inter net to the internal network.
View 3 Replies View RelatedHow do i get Ubuntu to use the wireless signal i am using now and output it on the Ethernet Card. Ubuntu knows how to access the web through them both. It just wont share the connection.
View 1 Replies View RelatedI am trying to setup a vnc like situation, not for desktop but for ssh.The scenario is that 2 users connect via ssh to the same server and for one of them to be able to see (and if necessary to take control) what the other is doing.This is for a test server running CentOS 5.3 x86 and googling around couldn't find anything close to my needs.I don't know if it's even possible with ssh but that came to my mind when thinking to remote access.
View 2 Replies View RelatedI created a wireless ad hoc network using network manager. That was simple. I have friend who doesn't have a wireless card, and still would like to join the LAN. It would be nice if he could have a different IP address Is this possible?
View 2 Replies View RelatedTrying to share my internet connection with other computers on my LAN. I've tried doing this with Debian, Ubuntu & Fedora so far...
My Intended Setup is as follows;
The Problem: So far I've not been able to get an internet connection from any computer connected to the HUB. I currenty have Fedora 13 on PC1 but have also tried with both Ubuntu 10.04 & Debian Lenny. I am open to using any Linux based distro on PC1 as long it has a Gnome Desktop. eth0 on PC1 can be Static or Dhcp, but I would prefer to set Static IPs on eth1 & all of the Client PCs
To the best of my knowledge I have enabled ipv4 forwarding in sysctl.conf (& some other changes);
Code:
All changes I made to the Firewall (all other Firewall settings are still at default, no custom rules added yet);
Router is set up to assign dhcp from 192.168.xxx.100 & 192.168.xxx.200
At the moment I have only 1 PC attached to the HUB. It's Ubuntu 10.04 (PC2)
It's details are;
ip 192.168.xxx.103
netmask255.255.255.0
gateway 192.168.xxx.101
Thus Far I can't ping 192.168.XXX.103 from PC1 & I can't ping 192.168.XXX.101 from PC2. (unreachable) I have an internet connection on PC1 (of course)
From the command shell, how do I get to a network connected drive?I do a "Connect to Server" -> "Windows share" and connect to one of my Windows XP systems. Everything is fine. But how do I get to that drive from the command line prompt so I can do terminal commands or open files programmatically (hmmm is that spelled right?) Thus far, I see no way to do it.
View 5 Replies View RelatedI have network manager applet 0.7. How to create a wireless network? I have an internet connection and I want to share it with other computers wirelessly.
View 2 Replies View RelatedI'm trying to share my wireless connection with my Xbox 360 over lan. Anyone know how to do this?
View 1 Replies View Relatedi have two machines both on ubuntu 10.4 connected to a network via port switcher, 2 rj45 network cables auto eth0 is setup to share with other computers, i can ssh in and out of both, so the network is all running but i want to know how to share my single dongle internet connection between the 2 computers
View 4 Replies View RelatedI have a Dell Inspiron 1525 running Jaunty Jackalope. I have a good working wireless connection.
My daughter has a lot of iPod tunes stored on an old white chiclet Macintosh, which she needs to download to her iPod. Because the iPod is "corrupt" (meaning it was last connected to Windows!), we need to connect to internet.
Simplest way to do that would SEEM to be to plug an Ethernet cord between the two machines and let her Mac access internet via this Dell.
My experience with ethernet is, either it works out of the box, or it doesn't. If it doesn't, I have no idea how to make the connection work.
What do I have to do on BOTH the Jaunty and OSX sides to make the connection?
I seem to be having quite a big problem with Internet sharing. After doing a clean install of Lucid, I tried to set up a shared connection between my computer and my Roku set-top box. I have noticed that I am only able to set up a connection profile in Network Connections under the Ethernet card with the active Internet connection. That is, whenever I try to set up a connection, I am not given the option of using the second Ethernet card. Thus I can't share the network connection. Can someone PLEASE help me? The IRC has been completely useless.
View 9 Replies View Related