My computer has 3 hard drives: 1 SSD, 1 sata II, 1 sata 3. This is a dual boot system contains OpenSUSE 11.2 64 bit OS and Win 7 64 bit OS. the SSD drive has OpenSUSE, and the sata II has Win 7.
Win 7 sees the sata II and sata 3 drives, while OpenSUSE only sees the SSD hard drive and the sata II drive. Even in partitioner in OpenSUSE does not see the sata 3 drive. Is sata 3 (6 gb/s) supported in OpenSUSE 11.2?
Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies View RelatedDear OpenSUSE experts: I am a dual boot computer: Win 7 64 bit and OpenSUSE 11.2 64 bit. This computer has 3 hard drives: SSD, 500GB sata II, 1 TB sata 3. SSD contains openSUSE 11.2 500GB sata II contains Win 7.
Win 7 sees the 500GB sata II drive and the 1 TB sata 3 drive. openSUSE sees the SSD drive and the 500GB windows drive. The Motherboard BIOS sees all 3 hard drives. Is it openSUSE not support sata 3 drive? Or do I have to install special driver for it to see it in OpenSUSE?
I recently set up a Samba Server on a new Gigabyte (Desktop) Motherboard with support for SATA 3.0. I used a new 1T SATA 3.0 (6Gb) Hard Drive. The system is performing poorly, seems to have problems both opening and closing files (*.dbf).
Also will hold a file as open periodically (may be a Samba Issue).
Does the O/S have to support this standard, or is it a function of the Hardware...?
I had put a second Sata hard drive in my computer and was pleasantly surprised not to run into any problems. No BIOS changes, just start the partitioner, partition, mount, it worked.And then... my computer didn't boot today.I disconnected the new hard drive and it went a little bit further, allowing me to log in as root and remove some lines in /etc/fstab. After that, it booted without any issues.I then remembered that the new drive was /dev/sda and the old drive /dev/sdb. I assume this is the reason for not booting, there is no GRUB on /dev/sda. How do I fix this? Can I simply plug in the cable for the new drive where the cable for the old drive was?
View 4 Replies View RelatedI have an IBM xSeries server with a 120gb IDE hd. I would like to use it for mail and web server at work. Obviously, I need a bigger HD. The only thing is I can't find a big (1TB) IDE HD all I can find are SATAs and this server's motherboard does not support SATA drives.
View 3 Replies View RelatedI am running Ubuntu 9.04 on a Dell Optiplex SX280 Yesterday the system locked up, and when I rebooted I got stuff like this:
Code:
[ 126.466459] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 126.466464] ata3.00: BMDMA stat 0x24
[ 126.466471] ata3.00: cmd 25/00:20:bf:a2:21/00:01:00:00:00/e0 tag 0 dma 147456 in
[ 126.466473] res 51/40:41:00:a3:21/40:00:00:00:00/e0 Emask 0x9 (media error)
[ 126.466476] ata3.00: status: { DRDY ERR }
[Code]...
I keep getting this error in my log viewer every 2 seconds: Code: ata4: limiting SATA link speed to 1.5 Gbps I have a dual boot SSD and I have run many SMART tests in windows and linux, (using smartmon tools and the disk utility) and the reports are all 100% healthy..... My research shows that this error represents one of the following:
1. Problem with SATA controller
2. Changing BIOS to allow SATA
3. Changing SATA mode to PATA or AHCI
4. Replacing the SATA cable
5. Allowing the SSD to run at SATA II speeds, i.e. 3 Gbps
- Does anyone know how to try number 5, i.e. allowing the SSD to run at SATA II speeds? I am lost here and this problem has caused my machine to crash twice when watching a movie in linux/ ubuntu. (It is worth noting that the crashes have only occurred in linux and I have never had an issue in windows, so it does seem to be a linux setting somewhere, hence why I think it is a "allowing SATA II to run at correct speeds issue")
I have read in the release notes that there is no SuSe Linux (SLES 10) support in Cent OS 5.x KVM or even for that matter in Xen.
Does that mean SUSE will not run at all or will there be nobody to support me? A complete YOYO scenario!
Does anyone have experience with running SuSe on CentOS KVM?
i actually registered here because i'm done with my knowledge of linux, errors which cause my sys to hang and/or reboot randomly after some time. They occur while the system is under heavy cpu, heavy mem-read-write, mediocre mem fill, heavy hdd io (for ~20 seconds every ~5 minutes).
problem background we ordered two identical PCs (specs below), one of them brought those sata errors quoted below from /var/log/messages, the other one runs flawlessly. Same Hardware and Software Configuration. Faulty one brought reallocated sectors right at start, mass seek errors, read errors. 1st try: swap cables, change bios mode ata_piix <-> AHCI. Didn't work. Went away for repair. Stupid Techie did only swap hdd, so problems occured again. Shipping for repair again. Board AND hdd exchanged. no more seek/read errors, no more reallocated sectors. But similar sata problems right after 3 days of previously described workload. Following logs are from after the last repair.
[Code].....
I want to configure my SUSE and Ubuntu distros for MP3, Flash, and MPEG support. What plugin should i download and install.
View 2 Replies View RelatedI'm currently an user of OpenSuse, newer version of Suse don't support some of the hardware that I use and previous version of Suse will cease to have support in a few months. So I'm considering other versions of Linux and Ubuntu comes to mind. So I like to know if Ubuntu (Desktop 32 bits) supports this devices:
NVIDIA Quadro2 Pro (including 3d support)
Wacom Intuos 2 SERIAL tablet
Epson ActionScanner II PARALLEL
I installed Ubuntu 10.04, and happened to have an Silicom Images PCXpress card plugged in, and it kindly added the sil_sata module.This is fine for this chip set.I think that my earlier installation of Ubuntu 9.04 used Libata, which does support NCQ and also has good legacy support for the Intel Intel ICH7 chipset I have inside my Sony Vaio SZ notebook. Also, libata also support Silicon Image chipsets as far as I can tell from URL...I wish to remove the Silicom Images SATA modules and replace this with libata and then test the performance between the two device drivers.
View 5 Replies View RelatedMy motherboard supports SATA but I do not know which version: SATA-I or SATA-II. I want to buy a SSD so it would be pointless to buy a fast SSD if my motherboard only suports SATA-I
View 7 Replies View RelatedWhat would be the preferred method to establish a remote desktop session from one 11.2 machine to another 11.2 machine in the same location? No firewalls, local connection only. I've looked at VNC, RDP with xrdp, have not been able to establish a session to desktop. I would rather not use desktop sharing if possible, don't want invitations involved. Want something similar to hitting from Windows with VNC3and taking over the established desktop session. This is in my house, no security risks involved
View 9 Replies View RelatedThats what im getting from a SATA drive. Its telling me its using IDE bus instead of SATA 3GB/s. How can i fix this?
View 3 Replies View Relatedubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies View RelatedI am out of SATA headers on my motherboard. The only way I can free one up is by switching my SATA DVD ROM to a PATA. How much trouble with this create with software that is linked to the DVD ROM? Will openSUSE 11.3 handle this gracefully or will I just be creating problems?
View 2 Replies View RelatedI have just installed opensuse 11.4 and the install fails to boot, grub hangs or gives an error.
I have tried installing grub in MBR and root changed every setting I can find and even downloaded a fresh ISO. As a last resort I changed the machines BOIS settings from SATA to emulate ide, booted as expected but a bit slow.
11.2 and 11.3 worked on this machine with no problems. Am i missing something? I also tried an Ubuntu install and this worked fine!
I have landed myself in a bit of a pickle. Needing to upgrade my system for 11.4 I went ahead and bought a refurbished Compaq. The intention was to merely replace the smaller drive with my existing drive. Only problem is that on opening the Compaq I found a SATA drive. Being a Compaq there is no space for a second drive, so I must copy my existing system via CDROM. As the 11.4 has gone through a number of updates since I installed, I cannot use the original installation CD. Downloading is out of the question for my link speed. I made an automatic backup when installing but am not sure where it is or whether it is also kept up to date. Anyway, does the backup contain merely the system and then require further transfer of home folders, etc? The alternative, of course, is to source locally the latest version that will not require hours of updating.
View 6 Replies View RelatedI wonder if this is a regression, I have seen info that this bug had been in the SB600 and worked around with 2.6.26:
Here's my lspci:
uname:
This is happening on three out of three SATA disks in the system and, even though I can't explain how, seems to have caused data loss on the mdraid they support.
It would be great if someone has a good idea on this one.
adding smartctl -a, just in case
After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
I am trying to format a usb attached 500gb sata hdd, I have tried all options CLI, KDE/GNOME partition managers but the format always fails. In /var/log/messages I get:
[Code]...
I experienced a strange random error that appears to have been my PC losing contact with the PC's 1.5 TB SATA drive.
This happened once (thus far only once - about two hours ago) on my Intel Core i7 920 PC with a Asus P6T Deluxe V2 mother board running openSUSE-11.4 with KDE-4.4.4. A reboot failed to fix the problem but a cold shut down restart did.
Some details ...
I had a zillion apps open, connected to my mother's PC in North America (from here in Europe) using vnc, had thunderbird, firefox, many konsole sessions, and various leafpad editor sessions.
Firefox appeared to hang, so I tried to close the Firefox page, but the PC appeared frozen (although the mouse would move). Then after about 60 seconds, the screen flashed, firefox closed (crashed may be more accurate) and I had my desktop back, ... sort of .... And I was able to go to the desktop area where vnc was running and access my mother's PC. But I was missing almost all the icons off my KDE destkop and most the icons off the panel at the bottom of the desktop.
I tried going to <CTRL><ALT><F1> and then <CTRL><ALT><F7> but that made no difference. I tried going to <CTRL><ALT><F1> to login but it would not let me login as a regular user, nor as root. Nor could I ssh into the PC. After <CTRL><ALT><F7> back at the crippled GUI, I typed 'shutdown -r now' (as root) but the command was not recognized. Neither was 'top' (as a regular user), nor 'fdisk' (as root). Dir was recognized as a regular user as was CD. But I did not believe the information those commands were giving me (it did not appear up to date).
Eventually I killed X with <CTRL><ALT><Backspace> (twice) and then forced a shutdown start with <CTRL><ALT><DELETE>, but then the PC hung during the shutdown, with the hard drive light on solid. That never happens. After a minute of that I decided to hit the 'hardware' reset. The PC restarted, but was incredibly slow to go through the motherboard boot menu's and it reported the hard drive not detected and would not boot. I did a <CTRL><ALT><DELETE> to restart, and pressed DEL to go to BIOS, and then noted in BIOS that the SATA drive was not detected.
I checked the temperature and the PC was a nominal cool temperature (38 to 40 deg c).
I then switched OFF the PC. I also turned the OFF switch on the back OFF for good measure. I waited a minute. And I turned ON again the PC.
The PC booted normally as if nothing had happened.
Most bizarre and a bit of a fright. My Linux is usually rock solid.
Anyway, ... no more investigation for now. I'm doing a massive backup of all data since my last backup. This will take a while as I have about 400 GB of home movies (at various stages of processing) from my home video camera to backup to an external hard drive.
I may pickup another 2TB external drive this weekend, just to ensure I have multiple backups.
I've installed 500 GB SATA hard disk but SUSE doesnt see it. The BIOS recognized the disk. What do I do in order to get the disk show up as sdb.
View 9 Replies View RelatedTrying to install SUSE on a perfectly working PC that was running Windows. Blew away all the partitions and formated the drives.When trying to install SUSE, Installer will not detect my two hard disks. Tried with version 10.x, 11.1 and 11.2, without success.My Mobo is a XFX GeForce 8209, and my SATA drives are both Seagates (1x120GB, 1x320GB). I've tried different SATA mode selection (i.e. SATA, AHCI, and RAID) without any success either.I've tried to look for SATA controller drivers for my Mobo, to try to load on Installer startup, but failed there too.
View 1 Replies View RelatedSo I installed SUSE 11.1 a few weeks back with two SATA drives andit's been working great. I recently received another SATA drive and wanted to add the space to my /home directory. I installed the drive and then booted up my computer. It goes through BIOS and POST just fine but when I get to GRUB my computer just hangs there. It doesn't throw any errors, it just sits until I hard reboot it. If I disconnect the extra SATA drive and then try to boot again everything starts successfully. I've done a little bit of searchingbut couldn't find much on this problem.pretty new to linux so I could definitely be missing something. Let me know if more details are needed.
View 9 Replies View RelatedI have a Dell Studio XPS running openSUSE 11.2 with dual mirrored disks (using Dell's SATA controller). Does anyone know how I can set up automatic monitoring of the disks so that I will be informed if either fail? I think smartd might be what I need here. Is that correct? I added:
/dev/sda -a -d sat -m <my email>
/dev/sda -a -d sat -m <my email>
smartd is running, but how do I know that it will report what I need? I also have a client with a Dell PowderEdge SC440 with SAS 5/iR also running openSUSE 11.2. They also require automatic monitoring. There doesn't seem to be a SAS directive for smartd. I notice that the newer release says it does support SAS disk. I upgraded to 5.39. On restart (with DEVICESCAN as the directive) I get the following in /var/log/messages for my SAS RAID disk.
Sep 18 10:47:26 harmony-server smartd[25234]: Device: /dev/sdb, Bad IEC (SMART) mode page, err=4, skip device
I ran:
smartctl -a /dev/sdb
and got the result:
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (openSUSE RPM)
Copyright (C) 2002-10 by Bruce Allen, smartmontools
Device: Dell VIRTUAL DISK Version: 1028
Device type: disk
Local Time is: Sat Sep 18 11:32:08 2010 JST
Device does not support SMART
Error Counter logging not supported
Device does not support Self Test logging
Is there some other tool/package that does support DELL virtual disks?
I am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies View RelatedI recognize the obvious need to back up the contents and follow a certain duty of care before attempting to clone my failing pata 250g HD to a 1 tera byte sata. What problems if any could come up when cloning from a failing pata to a sata HD? I'd like to make the switch to sata for many reasons if possible. It is indicated that the HP d530 sff here supports both types.
View 2 Replies View RelatedopenSUSE 11.3, 2.6.34.7-0.7-desktop, KDE 4.4.x, 3.0-P4, 2.5g mem. I replaced PATA-OEM optical drive with SATA-OEM works fine with all apps outside of and except with this widget. No problems until the swap. I have performed some updates and I have not put the PATA drive back in to see if the behavior changed because it was failing. It could be an update but the optical drive swap is my first suspect. This now. If I hover cursor over notifier widget icon "last plugged in device" will pop up with accurate last device until a click on the widget icon and selection of action for the recently plugged in device. Selected actions work fine ... once.
Then it no longer updates the new or retains the previous DVD/CD (or any USB external drive when connected) entry. Closing after viewing but with out selecting an action results in an empty list also. The menu remains empty there after and only removal of the widget and reinstall makes the devices appear again ... once. Then the behavior repeats if the widget is removed and reinstalled. I was wondering if this is likely to be a udev/rules.d problem related to the swap of the optical drives? The 70-persistant-cd.rules file shows two cd's after the swap:
[Code]...
If I delete or rename the 70-persistant-cd.rules file in udev/rules.d will it truly be recreated at boot and might it this fix the issue? Should I look elsewhere first at some var logs for errors? Reinstall 11.3 and let auto detect and config sort it out is also and option but I'd rather not, heh.