When I start Firefox I get the subject error. Suse 11.2. What does it mean, and how can I fix it? It also says "[java script application]" in the task bar when FF launches.
View 2 RepliesPackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?
View 2 Replies View RelatedI am fairly new to c++. There must be a better way to do the following?:- Say I have a base class, Pet. I have several child classes that extend from this, like Dog, Cat, Fish etc.
I have the following function, that returns a pointer to a new Pet:-
Code: Pet* addPetToVet()
{ //Do some stuff
return new Pet();
} This will return a pointer an instance of a pet object.
Now, if I want to interpret this pet as a dog or cat I have to do this:-
Code: Dog* dogA = static_cast<Dog*>(addPetToVet());
Cat* catA = static_cast<Cat*>(addPetToVet()); Is there a way around this? Casting seems lame. I cant write a function for each type of pet.
I have implimented SugarCRM on a SUSE 10 box . Every thing goes ok but in the SugarCRM ,it's saying :
Quote:
Error: Could not connect to the Sugar Server. check your Proxy Settings value in the System Settings admin panel. Last attempted connection @ 10/11/2010 06:37pm and unable to setup email inside that. But the system is neither have proxy setting and internet runs fine outside SugarCRM. IN RHEL,CentOS all run ok but not in SUSE ?
I am installing SLES on a new server with raid 05, after I went with the setup it copies all the files until It gets to install grub. It gets me an error message installing grub and it wont let me move forward.
[code]...
Have loved using v11.0 of Opensuse for years, lately I have noticed over time 7 of my 11 repo's have stopped/failed...does this means Novell-community has/will stop supporting this version and I should move on to a higher version ??? There hasnt been any change in my linux box for years.
Example: Refresh failed: Error: Could not refresh repository 'openSUSE-11.0-Oss': Valid metadata not found at specified URL(s) History: - File '/content' not found on medium [URL]' Error: Could not refresh repository 'openSUSE-11.0-Non-Oss': Valid metadata not found
Yast2 appears to be broken. Whenever I open the YaST control center and attempt to install new software, I am greeted with this error message. When I click on the "Install New Software" shortcut from the start menu, nothing happens.
I researched this error message and found that apparently I can install software via Zypper, but all the commands to enter in the terminal result in a message about an unrecognized command.
OpenSUSE 11.2 64-bit
It seems to be related to some kind of gcc library missing, but I went into YAST and I've installed the kernel sources, headers, devel, and a bunch of other things I found in various forums. I consistently get an error message about GLIBC_2.11 not found, even if I just do gcc -v. Contents of config.log:
[code]....
We have a server for which the root password had been lost, and there were no other user accounts set up. Yesterday evening I attempted to reset the root password by booting from the install CD and using VI to clear the root password in the passwd and shadow files. I then rebooted, and the system has halted with an 'FSCK failed. Please repair manually and reboot' error, with a prompt to 'Enter root password' below. But of course the root password isn't known (I had expected it to blank after editing the passwd and shadow files, but it doesn't work), so I have no way of logging on.
View 6 Replies View RelatedI am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies View RelatedI have a program to start called "pace_old".
In the command line I type it's name and get this:
What should I do ?
Distro is SuSe 11.1. Btw: I do not get this message on Suse 9.0. Pace_old runs properly there.
I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has
ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8
[code]...
I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.
View 4 Replies View RelatedOK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is
mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks
When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.
View 1 Replies View Relatedhow to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.
View 3 Replies View RelatedI have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.
View 4 Replies View RelatedI've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.
I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.
I tried to use different version of Python, and followed the Readme like this
./configure
make
make test
[code]...
New Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.
View 4 Replies View RelatedI tried to install openSUSE 11.3 from the Gnome live CD. I had four partitions set already for /boot, /, /home (ext4 all) and swap from a previous failed Linux Mint installation. I installed into them, and formatted them. The /boot partition is primary and pretty well into the disk. The other partitions are logical and at the end of an extended partition which has several partitions before them. There's also an inactive Windows primary partition at the start, and a second disk with a Windows installation and a lot of logical partitions.
After install, it looks like booting into grub works fine, and I get "Error 22: No Such Partition". I then get to the GRUB menu. If I choose openSUSE from there I get:
Booting 'openSUSE 11.3'
root (hd1,2)
Error 22: No Such Partition
Booting from the live CD it looks like /boot, / and /home contain data, so they must be formatted fine.
I am using SUSE 11.0 KDE 4.0 . My system has root user, one normal user and both are me only. I am using only 'user account' only.I used to install softwares from 'user account' by using YAST.
Now my problem is - when i am trying install a rmp file through YAST, it ask root password by a dailog window. when i entered the root password it is giving error
Quote:
The program 'SU' not found. </br>Make sure your path
I had attched a screen captured image of that window.
And then after i had to be ignore that message. Installation just starts and then gives error, installation fails. so now i am not able to install any softwares through YAST !
The software use to work well here, but now I got this when I try to run it
sparky: error while loading shared libraries: libtk8.4.so: cannot open shared object file: No such file or directory
But I can not find it.
I also tried
cd /usr/lib
ln -s libtk8.4.so libtk.so.0
ln -s libtcl8.4.so libtcl.so.0
but this does not work neither.
I cannot seem to get VMWARE workstation to run on SUSE 11.3. I am getting the following error message: /usr/lib/vmware/bin/vmware-modconfig: symbol lookup error: /usr/lib/gio/modules/libdconfsettings.so: undefined symbol: g_settings_backend_get_type
This is happening with version 6.5 as well as 7.1
I have been searching for 2 days and cannot find an answer. Apparently Sax2 isn't available in 11.3. It looks as if many are having the same difficulty. I've tried xrandr and tried to edit /etc/X11/Xorg.conf with no success.Copying a working xorg conf file might be a fix, I don't know.
View 8 Replies View RelatedI use Termlite from SCO as my terminal emulator. It works on SUSe 9.3 but i can not get it working on 11.3. How do I enable the networking for this in SUSE 11.3.
View 1 Replies View Relatedto get flash 10 working. I just decided to update to 11.3. Bought a 8.0GB USB stick to copy files to. USB DISK icon on visible on Desktop. mounted on /media/USB DISK Clicking on device properties it is read only. I can change permissions but that is only temporary. Looking under my computer it is formated as vfat device name is /dev/sdb
I can't copy any files to it. Can't see in terminal even being root as well. Almost started the Partitioner in Yast but didn't want to accidently crash the system. That WOULD be my luck Can't find a way to format it via GUI interface. Can I use something like fdisk in terminal. I guess I need to format it as ext3.
I have SuSE 11 box. I notice that there's an entry in /etc/services that shows windream running on port 534. Can someone tell what is windream? I tried to google but it keeps bring up German website or something.
View 1 Replies View RelatedI have activated dual screen monitors using the Nvidia driver GUI as Sax2 would not correctly configure it. Now at every boot I get the message "undefined video mode 31a, press [enter] for a list of video modes or [space] to continue. After pressing space the system boots to my liking, how can I get rid of the message at every boot up?
I am using Suse 11.2 and KDE4.3.1 My video card is an Nvidia Geforce 7100 GS I thought I was using the Nvidia drivers as I have a GUI from Nvidia in my launch menu if I search "Nvidia" and I have completed the one-click installation. Although when I go into "My Computer" it says driver unknown.
I accidently removed bottom panel of suse 11.1.Please be so kind to help me to get it back my bottom panel.
View 6 Replies View Related