This is my first question, I am not a linux expert. I found an interesting thread about this but it is related to RH 9 (http://www.linuxquestions.org/questi...-src-rpm-78937) I'm wondering if this database exists for RH EL5 too and in case if someone can point me to the right path to get it and how to install it. the system where I'd need to apply it is 2.6.18-92.el5 x86_64 GNU/Linux. The system is not connected to Internet.
View 8 RepliesRecently I got a very rare database issue, it says: Error: Couldn't read status information for table clients_copy () mysqldump: Couldn't execute 'show create table `clients_copy`': Table 'adm_retail.clients_copy' doesn't exist (1146) Error: Couldn't read status information for table dt_mx_emp ()
[Code]...
am using zabbix open source solution for systems monitoring. I am facing a problem and discussed it on zabbix forum. my post was as "My zabbix server is behaving abnormally, approximately daily from 9 to 12, the server stop accumulating logs. I observed that the server report is RUNNING but it did not accumulate log values and also the machine have no extra load. Its shown in the graph image attached.t the following reply,"database performance?are you monitoring database IO and available database threads? "So any one have any idea that how can I do this as I am using MySQL as backend database on RHEL 3.
View 1 Replies View RelatedI am writing a simple application that will run as user foo (i.e. Ubuntu user foo).However, the application will connect to my database as (database user foobar). IIRC, database users have nothing to do with Linux system users - but I just need to clarify that.So can an app launched to run as user 'foo', connect to a database as user 'foobar'?
View 1 Replies View RelatedI recently moved into a new place and when I hooked up my webserver, I wasn't able to bring up my page, even from localhost. With some digging, it seems that I can't access the database that housed my posts (wordpress installation). I looked for the datadir in MySQL and that directory shows the wordpress directory that should be holding the database and all the files are still there. 1) why the database no longer shows up 2) how to restore the database from the files?
View 2 Replies View RelatedI've setup a CentOS apache web server, and loaded a site onto it. The site previously was functioning under windows xp (before I "stepped in") and wamp. What I did was copy the site in /var/www, reconfigure the httpd.conf (DocumentRoot /var/www/site, etc). Although when I try to open the webpage I get this error: Database Error: Unable to connect to the database:The MySQL adapter "mysql" is not available.
[code]...
Is it exist API to apt-get (or may be to aptitude or dpkg)?For example I want to check through API does package installed or not?
View 4 Replies View RelatedI just noticed that I'm downloading about 60KB/s but no connection is established according to "netstat -tup". I use fluxbox, no automatic updates and the transfer exist even after relogging of my user.
View 1 Replies View RelatedAll my yum commands fail because it searches for pgdg90 : Error: Cannot retrieve repository metadata (repomd.xml) for repository: pgdg90. Please verify its path and try again. How can I stop it looking for a non existing location? If I use locate to find pgdg90 it returns /var/cache/yum/i386/12/pgdg90. If I ls /var/cache/yum/i386/12/ there is no pgdg90.
View 14 Replies View RelatedI installed Ubuntu 9 on my kids' computer a while back and usually the computer boots up and goes directly into Ubuntu. However, this morning when they booted it up, the following error message displayed: "The GDM user 'gdm' does not exist. Please correct GDM configuration and restart GDM." It seems that they had inadvertently messed up some configuration files. After pressing 'OK' it asked me for my user name and password, which I supplied, but that didn't work either. So, either I've forgotten my password or my kids seriously messed up their computer, so much so that I can even work with it in command line. I was thinking about simply reinstalling Ubuntu and possibly updating to version 10, but I'd rather not lose the files on the computer. Thus my question: Does anyone see a way of not losing my and my kids' files while getting back into Ubuntu?
View 1 Replies View Relatedwhy doesnt it CD to desktop?
View 4 Replies View RelatedI installed LyX to try it out and the built-in tutorial wants me to play around with the file "example_raw.lyx", but I can't find it anywhere!
View 7 Replies View RelatedIn my system(CENTOS) displays the "gdm user does not exist". I cannot typing any word except username and password. Try all virtual terminal but failed. and also try to connect the ssh but I can't.
View 1 Replies View RelatedI was just trying to get the now playing for banshee to show on conky but the way I was going to do it required me to make a wrapper for banshee.sh but I can't seem to find it or it doesn't exist.
View 4 Replies View RelatedI was trying to install gcc, and it sorta worked, but not really.. Im a student, and we were using an ada server that had 'gcc' already installed, so that we could cd to a directory and then 'gcc -o NAME FILEPATH' I tried to recreate this set up on my machine with Fedora 11... on my mac it is installed automatically and can be accessed from the terminal. How do I do it in Fedora? I downloaded 'gcc-4.6.0', I ran 'configure' from the gcc directory and a lot of text scrolled by really fast.. but then afterwards it said something failed...
but its weird, cuz I can write a simple 'c' program and gcc it from the terminal and it compiles.. it just gives me warnings about everything.. saying that packages like 'cstdio.h' do no exist.. warnings tho, not errors.. and it still runs.
I have a compiled program, a tagger to identify parts of text, which claims it does not exist.This executable has to be called by a generated script, which is how I ran into this issue. What are the reasons this error could show up?The executable was copied from another machine.The file does have execution privileges (it gives a proper not-allowed message without them)I've tried copying the file to a different location (same problem)I've tried replacing the file with a fresh copy (same problem)The file does exist. Opening it with pico shows a file with binary data.
View 4 Replies View RelatedI want to use the command more to see the content of a text file; however, the command is not available. I wonder whether all linux commands exist in cygwin. I am running cygwin on windows xp.
View 4 Replies View RelatedI am dual-bootng Ubuntu 9.10 and Mint 8, both of which use GRUB2. The Mint 8 GRUB sets the initial menu since Mint was loaded after Ubuuntu 9.10. Since both use GRUB2 I was not concerned about this.
Both before the installation of Mint and afterward I see a series of messages fly by on the screen when Ubuntu is booted. These come right after the initial presentation of the Ubuntu logo.
By restarting several times I can read the first several lines. They are:
Mount: Mount Point 0 does not exist
Mount 0 terminated with status 32
Mountall: Filesystem could not be mounted
Further lines follow but I would have to reboot umpteen times to have any chance of copying those.
I have looked in the various Ubuntu GRUB2 files for "Mount Point 0". I do not see any reference to it.
GParted, BKID and etc/fstab all agree on the UUIDs set for my Ubuntu/, Ubuntu Home and Ubuntu swap file.
I see nothing like this when I boot Mint 8.
My questions:
What is the point to error messages (I assume that is what they are) that fly by too quickly to be read? Are they saved to a logfile somewhere?
What is "Mount Point 0"?
What does it mean in this context to say "Filesystem could not be mounted"?
This is all very curious because Ubuntu proceeds to mount and run just fine.
What is Ubuntu trying to do as it starts up that it cannot do?
How do I repair whatever has to be repaired in order to turn off these messages?
I have looked through such GRUB2 dcumentation as I can find without seeing any reference to this.
I would love to change the boot order on my laptop. Mainly because it is shared, and I am the only one who uses Ubuntu (version 9.10)... So everyone keeps moaning for me to change it!
Following all the sound advice from this forum it looks easy... Except /boot/grub/menu.lst does not exist!
I would get the message that the uuid file does not exist. I've been online looking for fixes since yesterday morning and nothing has helped at all. I've read online that I should run fdisk -l to obtain info to share with others, but that command doesn't work in any command prompt I open. I am running Ubuntu 9.10 with the latest patches and I'm sure you guys know that it runs Grub2 loader...if that helps at all.
View 9 Replies View RelatedI accidently selected the wrong folder to sync with ubuntu one. It has now added .u1conflict to all my files (around 8000 of them ) and now I can't stop the folder syncing. I've followed these instructions This just returns an error:
Code:
FolderDeleteError: DOES_NOT_EXIST (subscribed=, suggested_path=~/Music, generation=,
node_id=dc8be355-c4dc-4111-9650-b4744aeae2a4, volume_id=1897e926-212b-424e-87ee-
[code]....
My desktop just froze for some reason and I had to force shut down. When I logged back in I could not get into my /home/username directory, a message popped up that it does not appear to exist and if I would like to put it as root.
what should do to get it back?
I need to find if, in a folder any directories exist, except a certain one named "mes croquis".What I am trying to say, is that the re already is a directory named "my croquis", which I have to ignore. IF any other directory appears, I have to archive them.I got everything so far, except the starting condition.In other terms , I am lookign for something like this:
IF anyDir EXIST AND name != "mes croquis"
do something
else
[code]....
Not sure this is correct place, but I think it's related to network. I'm using CentOS 5. I installed nscd successfully using yum. But I can't start nscd. It shows [ OK ], but stop right away, and I can't found any nscd process.
/var/log/nscd.log is empty, /var/run/nscd/nscd.pid has a PID that doesn't exist, and here's /etc/nscd.conf
Code:
#
# /etc/nscd.conf
#
# An example Name Service Cache config file. This file is needed by nscd.
#
# Legal entries are:
#
#logfile<file>
#debug-level<level>
#threads<initial #threads to use>
#max-threads<maximum #threads to use>
#server-user <user to run server as instead of root>
#server-user is ignored if nscd is started with -S parameters
#stat-user <user who is allowed to request statistics> .....
apt-get does not exist on my server: when i run this command: apt-get install php5-dev i get: Code: apt-get: command not found information: Plesk 9.3.0 | PHP Version 5.1.6 | CentOS release 5.4 | Linux 2.6.28.7 | GenuineIntel, Intel(R) Atom(TM) CPU 330 in usr/bin there's nothing called apt-get i have root access (SSH)
View 14 Replies View RelatedCode:
[Thu Jul 29 04:47:50 2010] [notice] mod_chroot: changed root to /var/www.
[Thu Jul 29 04:47:50 2010] [notice] Apache/2.2.15 (Debian) PHP/5.3.2-1 with Suhosin-Patch mod_chroot/0.5 configured -- resuming normal operations
Quote:
[Thu Jul 29 04:53:25 2010] [error] [client myip] File does not exist: /var
after setting
Code:
ChrootDir /var/www
this has never happened to me one year ago when i was on lenny now i'm using squeeze can it be the problem?(nevermind what i type in httpd.conf it always gives var error.)
I am trying to run Memtest86+ on my Linux computer. I use Grub 2, and Memtest86+'s core is located in /boot/memtest86plus/memtest.bin file.It seems to be pretty newbie error, but I can't find any documentation covering this problem.If I use linux16 instead of netbsd, computer just restarts without any error.
View 9 Replies View RelatedWhat is difference between BSD and Linux exist?when i want install bsd i see some details that exist in linux like partition type,swap partition and etc.if PC-BSD is free why in pcbsd.org it have price?what is good for desktop pc?
View 12 Replies View RelatedI want to copy a file from an old directory to a new directory and ideally I would like that the 'mv' command itself could create the directory for me in one step...That is to say that the directory would not exist until 'mv' has been called as in:Code:mv olddirectory/file.dat newdirectory/file.datso mv would create the directory 'newdirectory' in the above call....I am not sure if this is possible however, that is to say I think it may be necessary that the directory 'newdirectory' already exists before I make the above call to mv, as when I make try the above call when 'newdirectory' doesn't exist I get the following error:Quote:mv: cannot move `test1/4215/4215-001R.fit' to `test2/test.fit': No such file or directoryso to sum up, my question is:is there some paramater for 'mv' that I can change so that it will create the new directory as well as copy the file and if not, are there other commands that might do this?
View 3 Replies View Relatedc@c-laptop:~$ locate /.bashrc
/etc/skel/.bashrc
/home/c/.bashrc
/root/.bashrc
I need to edit /home/c/.bashrc
However when I go to place> Home folders to go to /home/c , the file is not there.
What should I do to make the file appear so that I can edit it?
It is obviously a system file.