General :: Why Would Executable Say It Doesn't Exist / When Try To Run It?

Sep 28, 2010

I have a compiled program, a tagger to identify parts of text, which claims it does not exist.This executable has to be called by a generated script, which is how I ran into this issue. What are the reasons this error could show up?The executable was copied from another machine.The file does have execution privileges (it gives a proper not-allowed message without them)I've tried copying the file to a different location (same problem)I've tried replacing the file with a fresh copy (same problem)The file does exist. Opening it with pico shows a file with binary data.

View 4 Replies


ADVERTISEMENT

General :: Executable File Apparently Doesn't Exist When Trying To Execute With Bash

May 9, 2011

I downloaded a program called tonespace http://www.mucoder.net/en/tonespace/ which I extracted and then tried to execute the executable file with ./tonespace. This gives me the following message:

bash: ./tonespace: No such file or directory

When I use the command: file ./tonespace I get this: tonespace: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.15, stripped

I dont get it. The file is clearly there, yet when trying to execute it bash doesn't seem to recognize it.

It has permissions rwxr-xr-x and is not owned by root. Am I overlooking something?

View 2 Replies View Related

General :: Can't Believe That Program That Does Same Thing Doesn't Exist

Sep 14, 2010

For our class project we are going to use HyperTerminal to communicate to something we are building that is attached to our laptops using USB. We're supposed to use HyperTerminal.URL...I can't believe that a program that does the same thing doesn't exist in Linux. What programs that can do the same thing are available in Linux and Mac OSX?

View 5 Replies View Related

General :: Slackware 13 Sessions Command Doesn't Exist?

May 24, 2010

I'm running Slackware 13 - xfce4 and I got a new session in background. How could I see that session and use it? In backtrack I'm doing it via sessions in terminal but im Slackware 13 session command doesn't exist.

View 2 Replies View Related

General :: GRUB Loader Says Drive Doesn't Exist

Feb 15, 2010

If at all possible I would like ot keep the GRUB loader and repair my situation.My slave drive has Windows 7. My master had Ubuntu on it. When it installed it added the GRUB loader.I replaced it with Fedora, but now the GRUB loader says it can't find the drive and bails to grub-rescue.If possible I would like to keep the grub loader. If I can't repair this, is there a way to uninstall it and reinstall it.

View 16 Replies View Related

General :: Query Died: Fusername: Table 'rsmembers.User' Doesn't Exist

Nov 5, 2010

I just purchased a new server and loaded it with Ubunut server 10. I installed apache2, php5, and mysql5. apache needs a little bit of configuration left (I need to tell it to accept index.php in addition to index.html), but other than that, all the php is working. MySQL is working as well, at least on the server. If I do a "show databases;", it shows all the databases properly. I loaded phpmyadmin on the server for testing, but I'll be removing it once everything works - this is my production server. phpMyAdmin can find all the tables, perform successful queries, and do everything I want it to, HOWEVER If I try to use the login page, I get the error mentioned in the title of this thread.

The database is a carbon copy from my development server, which works flawlessly. All the php and html pages are exactly as they are on the development server too, yet I still get that error. I've reloaded all pertinent programs (apparmor, apache2, and mysql). Apparmor was because I had to declare some new lines for mysql to access a different location for the DBs I resolved the "can't load InnoDB issue", but this one is stumping me.

View 1 Replies View Related

General :: Fatal: Bad Magic Number In Executable `prime' (not An Executable?)

Sep 3, 2010

I am trying to run Wattch simulator in linux.But it is giving the error below. what is this error and what do I do about it?

fatal: bad magic number in executable `prime' (not an executable?)

View 1 Replies View Related

General :: Move A File To Some Path And Create That Path When It Doesn't Exist?

Oct 8, 2010

I use this command:

Code:

find ./ -atime +360

to figure out the files that haven't been accessed since 360 days. The command above will return results like this:

Code:

/uploads/2010/02/some-file-name.ext
/uploads/2009/08/another-file-name.ext
... etc

I'm taking here about tins of directories, thousands of files. I'm looking to find a command that makes me able to move the results above to another path, and to create that path once it doesn't exist like below:

Code:

mv /uploads/2010/02/some-file-name.ext /old-files/uploads/2010/02/some-file-name.ext

But I want the executed command to create this path

Code:

/old-files/uploads/2010/02/

If it doesn't exist.

View 6 Replies View Related

General :: Scp - Error "file Doesn't Exist"

Feb 18, 2010

I'm trying to use scp to get a file from my desktop onto the server for my school. I'm connected via VPN and using PuTTy to try to do this. I've tried every single combination/permutation/help site on the web that I can think of and I still can't get this thing working. This is what I get:

[palermo@matrix hw2]$ scp synoptic.data palermo@matrix:/rhome/palermo/ats652/hw2
palermo@matrix's password:
synoptic.data: No such file or directory

Yet the file sits, in all it's glory, on my desktop. What have I missed here? This is for a homework due next week, so the urgency is kind of on.

View 5 Replies View Related

Debian :: No Banshee.sh - Doesn't Exist ?

Aug 17, 2010

I was just trying to get the now playing for banshee to show on conky but the way I was going to do it required me to make a wrapper for banshee.sh but I can't seem to find it or it doesn't exist.

View 4 Replies View Related

Debian Configuration :: Icedove Doesn't Seem To Exist

Apr 11, 2016

I have had to revert my VM to a previous image (did something to screw it up) anyway I have to reinstall icedove into my VM and I noticed after doing: sudo apt-get update && sudo apt-get install icedove that icedove can't seem to be found in the libraries anymore and simply wont install.

View 14 Replies View Related

Ubuntu :: Alert /dev/disk/by-uu... Doesn't Exist?

Apr 30, 2011

long story, I upgraded my system from maverick to natty, didn't like it so restored my system with a backup that I had done recently. after it rebooted I used gparted live CD to expand my partition, moving swap to the end of the HD, then when I rebooted grub didn't work so I booted with ubuntu live cd and reinstalled grub. then I booted normally but nautilus didn't work and had lots of problems. So I installed ubuntu again with ubuntu live cd, formating the partition and expanding it, no problems at all.But, I wanted my files back, so restored the system again, now the message that I get isQuote:

Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
-Check rootdelay= (did the system wait for the right device?)

[code]....

View 9 Replies View Related

Fedora :: Why Config.h File Doesn't Exist

Jul 30, 2010

i was assigned with a project to analyse the performance of ASSP mail filter engine.I am using Fedora 7 with KDE3.5. I need to install a lot of perl modules to run the assp.pl code.I was trying with all sorts of packages like src.rpm, ixxx.rpm, tar.gz, tar.bz2. All these packages doesnt work exactly. When i tried with rpm packages. I am getting this error.

/*
[root@localhost RPMs]# rpm -ivh cyrus-sasl-2.1.23-9.fc12.src.rpm
warning: cyrus-sasl-2.1.23-9.fc12.src.rpm: Header V3 RSA/SHA256 signature: NOKEY, key ID 57bbccba
1:cyrus-sasl warning: user mockbuild does not exist - using root

[code]....

So i checked for config.h file as given the directory but it was missing.I don't know why?

View 4 Replies View Related

OpenSUSE Multimedia :: Folder Vdpau Doesn't Exist?

Jul 4, 2010

mplayer complains about not being able to find libvdpau_nvidia.so. I checked in /usr/lib, and it's there, but it's a link that points to /usr/lib/vdpau libvdpau_nvidia.so. The folder vdpau doesn't exist.

Which package do I need to install to get this to work?

View 4 Replies View Related

Ubuntu Installation :: 10.04 /dev/md0 Doesn't Exist When Grub2 Tries To Access It

May 1, 2010

I have installed Lucid Lynx more than a dozen times in the past thirty hours and I've almost got it working with RAID. The current problem is with /dev/md0 not existing when grub2 tries to access it. When I boot from the alternate CD in rescue mode, Ubuntu sees /dev/md0 as a software RAID array and I can access the files accordingly. When I boot from the grub2 bootloader, it sits for a while before spitting out "Gave up waiting for root device" and tossing me into the initramfs shell where I can see that /dev/md0 doesn't (yet) exist. What can I change within grub2's configuration to inspire it to start /dev/md0 before trying to mount it?

View 6 Replies View Related

Ubuntu :: If Xorg Doesn't Exist - What Handles Video

Jul 5, 2010

My laptop has an Intel video card. Does Intel have open source drivers that are included in the kernel? I'm kind of curious because I do not have a xorg file, and I did not install any drivers as I had to on my nvidia desktop, yet all of my maximum resolutions come down accordingly.

I'm just curious on what exactly controls the video settings if xorg isn't in the picture.

Also - what relevance does the Fn keys have that probe for a 2nd monitor to Ubuntu? For example, I do not have a 2nd monitor attached, but if I hit Fn F8 over and over, sometimes it changes my resolution. Why is this? Why would that revert my resolution?

View 9 Replies View Related

Server :: Edited The Config Files Because Xx.xx.xx.xx Doesn't Exist?

Aug 25, 2010

I'm taking over as a Linux admin where they use sendmail last week. I've done very little with email on linux, and haven;'t touched sendmail since 2000 so I am really out of my element.Basically the sendmail server for many months has had performance problems, disk, and load.Looking into it I found this doing a tail on /var/log/MaillogAug 25 17:11:49 web8 sendmail[1531]: o7OGF2VH002566: to=postmaster, delay=1+01:58:10, xdelay=00:00:00, mailer=relay, pri=2388694, relay=[xx.xx.xx.xx], dsn=4.0.0, stat=Deferred: [10.10.20.107]:No route to hostAnd that was all it was spewing, I edited the config files because xx.xx.xx.xx doesn't exist. And running m4, then restarting sendmail.It is still spewing out that message, but I do see some things connecting to the new yy.yy.yy.yy address. I even greped the entire /etc looking for the old machine.

View 2 Replies View Related

Programming :: Win32 Function _fpclass() Doesn't Exist

Apr 6, 2010

I'm porting code from Win32 to Linux, a math science app, the thing is that the app have full dependency of de win32 function _fpclass(). Today I was looking all day that function on Linux but it doesn't exist. I know that there are some functions that can make the job mixing them in a other one like in this link below, more or less. [URL]

Well the app use very high virtual memory, Gigas of it(around 500), use Linux as Calculation Server using a very large swap space. If we can't find some way to fix this trouble, we can change the Linux for some open *nix like Open Solaris, because those have fp_class_l().

View 4 Replies View Related

Ubuntu :: Unity Bug: A Built-in Screencaster Doesn't Exist?

Jan 31, 2011

https://bugs.launchpad.net/unity/+bug/711098

View 1 Replies View Related

Programming :: Re-mapping Stdio For A Fork'd/exec'd Executable Doesn't Seem To Behave

Jan 27, 2011

I have a monitoring program ( GIT link to sourceforge ) which I'm trying to use to track when a child exits/dies/whatever. I'm calling fork(), then close for 0,1,2, and then opening /dev/null, monitored.stdout, and monitored.stderr as a replacement. I'm not sure if I've done something incorrect (perhaps I should use dup2 for explicit assignment?) but it appears that printf() messages are just being blackholed. I've tried setting the line buffering as a last ditch effort. On a different system, using code similar to the spawn_monitor() function, this appears to work fine, which makes me think I'm relying on some implementation specific detail.

Relevant function, for those who don't click links:

Code:

26 int spawn_monitored(char *argv[])
27 {
28 int exit = 0;
29 pid_t child;
30 const struct rlimit inf = {

[code].....

View 14 Replies View Related

OpenSUSE :: Installation Manual Doesn't Exist In GNOME Website?

Aug 6, 2011

I have problem with installing GTK tools on openSUSE. And, the installation manual doesn't exist in GNOME websiteGetting ready for GNOME development

View 1 Replies View Related

Ubuntu :: Archive Manager Create The Specified Directory If It Doesn't Exist?

Feb 16, 2010

Is it possible to have Archive Manager create the specified folder when I enter it into the path field? Like if I want to put something in "/Main/Sub1/Sub2" But "sub2" doesn't exist, can I just have Archive Manager create it and put the files there?

View 1 Replies View Related

Ubuntu :: Files Copied From Ext3 To Ntfs Doesn't Exist

Apr 14, 2011

I'm using a dual boot system with kubuntu 10.10 and windows vista.When I try to copy files from kubuntu to a windows drive, I see no problem.But when I retsart to windows usually I can't see my files. Once or twice I have seen files I copied in kubuntu. The strange thing is that when I go to kubuntu again, I don't see files I have copied in windows drive.

View 2 Replies View Related

Debian Multimedia :: 7.8 Startx - No Screens Found > Wlan0 Doesn't Exist

Apr 17, 2015

Installed Debian 7.8 KDE next to Windows 8.1.

Installed perfect perfect (except for network part). Grub came up, I selected Linux. After start up I typed

Code: Select allstartx

And I get the

Code: Select allFatal server error: no screens found

Also when I run

Code: Select allsudo iwconfig all I get is
Code: Select alllo        no wireless extensions

eth0            no wireless extensions

Running lspci I get (vga for startx problem and network for WiFi problem)

Code: Select allVGA compatible controller: Intel Corporation  ValleyView SSA-CUnit (rev 0e)
Code: Select allNetwork controller: Atheros Comm. AR9485 Wireless network adapter (rev 01)

View 6 Replies View Related

Ubuntu Installation :: 'No Operating System Installed' - GRUB Doesn't Appear To Exist

Feb 12, 2010

I have a dual boot windows XP/ubuntu 9.10 set up on one hard drive. Everything was working fine. The 9.10 install had been updated from 9.04. I recently had problems with the XP partition (XP basically collapsed) so I re-installed XP on the same partition it was on before. I then attempted to reinstall Ubuntu ( I decided I wanted a new 'clean' installation of Ubuntu as well). When I got to the partition function it refused to recognize that there is a Windows partition, or a previous ubuntu partition, but states 'No operating system installed' or similar, and offers the entire hard drive for installation. When I look at the partitions using Windows partition software the Windows and the ubuntu partitions are clearly in evidence. I have also tried to reinstall GRUB but it doesn't appear to exist.

View 3 Replies View Related

Server :: ERROR 1146: Table 'information_schema.tables' Doesn't Exist

Jul 13, 2010

Does anyone know how to write this command for mysql version 4? (The command is for mysql version 5, I guess since when I check database in mysql server version4 there is no database name information_schema ) command:select concat(table_schema,'.',table_name) as table_name,table_rows from information_schema.tables where table_rows > 1000000 order by table_rows desc; meaning:show all database,table name and row count from all databases that has table row more than 1000000

Run result with mysql version 5: mysql> select concat(table_schema,'.',table_name) as table_name,table_rows from information_schema.tables where table_rows > 1000000 order by table_rows desc;

[Code]....

View 3 Replies View Related

Server :: Database Table Doesn't Exist [error Code: 1146]

Jun 18, 2010

Recently I got a very rare database issue, it says: Error: Couldn't read status information for table clients_copy () mysqldump: Couldn't execute 'show create table `clients_copy`': Table 'adm_retail.clients_copy' doesn't exist (1146) Error: Couldn't read status information for table dt_mx_emp ()

[Code]...

View 2 Replies View Related

General :: Save Iptables When Iptables-save Doesn't Exist?

Apr 14, 2011

I'm working on a Soekris net4801 that is running an unknown distro of Linux. The kernel is 2.4.29, and iptables is v1.3.4.

I can't work out how to save the iptables. I searched the whole system for files/folders containing the name "iptables" and got 3 results:

/user/local/lib/iptables
/sbin/iptables
/lib/iptables

I've tried iptables save, iptables-save and iptables save active.

"iptables save" and "iptables save active" give me an invalid argument error. "iptables-save" isn't a valid command. "iptables --help" gives me a list of valid switches, none of which have to do with saving.

how I can save the iptables?

View 1 Replies View Related

Fedora :: Make A Executable (application/x-executable)

Aug 21, 2011

I hope this post stands in the right section.I have a commandline i need to enter in terminal when i want to run a program. i tought lets put that piece of command in an .sh file and just click the file to run the program (then i dont need to open terminal first an give in the command) however the .sh file does not open the program. so i propably need to make a executable (application/x-executable).

View 3 Replies View Related

Ubuntu :: Cannot Open An Executable File Because Of Executable Bit?

Jun 20, 2010

I am running into a snag on .exe files in Lucid. I have Wine installed, but I can not open the file as it is blocked from executing with a window popping up telling me that this file was blocked due to security reasons. I go into the files properties and try to change the permission but that does not help. Is there a way to get around this? Possibly in the terminal as root?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved