i have a C program which creates an executable file in linux after that we can use that exe file and decode any file which is encoded by flatedecode algo now i have to write a C program... which reads a file.....use the above mentioned exe file and den post the decoded output.... i am in need for a code in C which can run EXE files and perform some function...
View 1 Replies
I have a HP 530 laptop running Fedora 11
If I run 'uname -ar' Linux 2.6.30.5-43.fc11.i586 #1 SMP Thu Aug 27 21:18:54 EDT 2009 i686 i686 i386 GNU/Linux
It has virtual machines and a dual core processor.
The results of
Code:
Power management:
processor: 1
flags: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts pni monitor vmx est tm2 xtpr pdcm
bogomips: 3657.37
clflush size: 64
power management:
I am using Unison so synchronise my files. I have configured Unison to start when I log on no problem, but is there any way that I can open Unison when I click log off, such that it will wait for Unison to finish before actually logging off (I need to input a password and respond to prompts)?
View 2 Replies View RelatedI was trying to customise my desktop, and I disabled gnome-panel as I don't need it (and auto-hide wasn't working). Now when I boot up I can't open anything as the "run" dialog using alt + q (changed shortcut from alt + f2) doesn't load, nor does the terminal via shortcuts. I'm using Compiz, and disabled nautilus drawing the desktop so Compiz could do it for me.
Do you know what I can do to get this back or to get the "run" dialog to open again? EDIT: Skype ran as start up, so I got a friend to send me a link, which opened my web browser. I then downloaded a file, and viewed it in nautilus which meant I could get to the terminal and run gnome-panel from there. I can now get it back easily when needed. Do you know if there is a way I can get the "run" dialog to work without needing the gnome-panel running?
I am a final year BE student. I am working on the ehci-0.6 library for tracking the the face in fedora 13 in vmware. I am able to compile the code but could not run the sample programs. The error is as follows. After I compile the program:
cd ehci-0.6
./configure
make
I am able to do the above with out any errors. Later when try running samples. I am getting the below errors:
cd samples
make
./simple2d
(<unknown>:5940): GStreamer-CRITICAL **:
Trying to dispose element appsink1, but it is in ready instead of the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. This problem may also be caused by a refcounting bug in the application or some element.
(<unknown>:5940): GStreamer-CRITICAL **:
Trying to dispose element ffmpegcsp1, but it is in READY instead of the NULL state. You need to explicitly set elements to the NULL state before dropping the final reference, to allow them to clean up. This problem may also be caused by a refcounting bug in the application or some element.
OpenCV Error: Unspecified error (unicap: failed to get info for device
) in CvCapture_Unicap::initDevice, file /builddir/build/BUILD/OpenCV-2.0.0/src/highgui/cvcap_unicap.cpp, line 139
terminate called after throwing an instance of 'cv::Exception'
Aborted (core dumped)
and but ven tried using
./samples/simple2d
the error I am facing is "could not initialize the capturing"
How to overcome this kind of error. Blank window opens and goes on showing the error mentioned above and ends ven given ctrl + c. The expected output to open a window and display the capture the person present in front of the webcam and print d coordinates of the face captured.
I fired up my PC this morning and not unusually got an update message. I updated all that I was instructed to, as per normal - and at the end of the update was told that I'd need to restart to effect changes. I was in the middle of something else at the time so I left it but I turned the PC off an hour or so later and left it.
On starting up again I cannot get my previous resolution (1600 x 1200) and Second Life resolutely refuses to run giving a "Window creation error". Trying to change the display settings from the System> Administration menu just stops: It asks for the root PW and then nothing happens
Clearly something's gone a bit pear shaped here. I'm using Fedora 12 wth a PAE kernel and on an AMD 5200 chip with an nvidia 7900GS card. Things worked fine until this update so I strongly suspect that to be the cause but what can I do to fix it? Is there any way to "roll back" the update somehow or is there a fix?
I've got my Samba shares up and running. I can stream files from the server, I can create files on the server, and I can copy files from the server.
Running a Windows program (from a Windows box) directly from the Samba server, however, is turning into a nightmare. I'm getting Access is Denied errors from the Windows box, yet I can copy/create/etc from the entire directory with no problems.
Are there any special permissions I need to run EXE files from a Windows box, located on a Samba share? I've already chmod'd everything to 777, and I show full access when ls -Z is used.
how to install programs, that i downloaded onto my windows XP computer,and they are for linux, i downloading it off a site.i just need to learn how to install it,and i need to find a media player that plays FLV files, as well as MP3 files, with the codec preinstalled,or how to install codecs.im sorry im really new to linux, i was considering switching to Mint, is that any better for media?
View 9 Replies View RelatedWhat files or programs have the ability to change your default network scripts and config files? All 3 of these very important files got changed on their own.
/etc/sysconfig/network-scripts/ifcfg-wlan0
/etc/sysconfig/networking/devices/ifcfg-wlan0
/etc/sysconfig/networking/profiles/default/ifcfg-wlan0
I have downloaded the rpm file "rpmfusion-free-release-stable.noarch.rpm" from internet and tried to install this(VLC) on fedora 10 by running following commands:-
rpm -ivh rpmfusion-free-release-stable.noarch.rpm
Then it showed me finishing installation. But I am not able to find out where it is installed? I am not able to use this software. From where I an get these details .... it is not showing me under the Applications----> Multimedia.
I installed openSuse 11.3, and configured my inittab like:
1:2345:respawn:/sbin/mingetty --noclear tty1
2:2345:respawn:/sbin/mingetty tty2
3:5:respawn:/usr/bin/startx -- :3 tty3
[code]...
under the console 7 (ctrl+alt+f7), I have a virtual win xp, and I run some music and apps in it.. but, when I switch to any another console, it just shuts up.. also, when I log in as a root under console 2 and go back to console 7, sound card also shuts up..
My problems is that after i've DL a program and then use unrar to open up the files...I was able to successfully mount a linux version game using Furious ISO mount (the game is Civilization call to power loki) Now I can see the files inside the folder but I can't figure out how to run the game after its mounted
I've looked around a lil bit and I know someone has probably asked this question before but most of what i find is people asking how to mount the image to begin with
I have a dual boot system, Windows 7 and a WUBI installed Ubuntu 10.04, both are 64 bit. Can I use Wine to run a program installed on the Windows partition? If so is there anything special I need to do? My Ubuntu partition is really small and I:d like to keep it that way.
View 3 Replies View RelatedAre there potential compatibility problems if a KDE program is installed and run under Gnome in the standard Ubuntu Desktop 10.10? If two programs with the same functions are available, is it better to select the Gnome version?
View 3 Replies View RelatedI am new to C programming and I need a way to compile and run my code. I've made a little research and I found that eclipse is a nice IDE. But I don't know how to configure it and generally. What do I need to download and install to make it work. I've also tried downloading easy eclipse that doesn't need any configuration or extra files but the link on the site was broken. Is there any other C IDE like easy eclipse available?
View 5 Replies View RelatedI am trying to study gtk programming and get stucked before some errors in compiling them. Iam using ubuntu 9.10 and i didnt installed any additional libraries or packages for running these gtk programs assuming gtk is already installed in ubuntu. I am newbie to gtk I tried compiling some example programs from my tutorial and it ended up in errors. So do I need any additional packages to run these programs.when compiling it shows package config cannot find any gtk+-2.0 packages and to try specifying .pc in environment path. I don't know how to set these path stuff.
View 1 Replies View Relatedhow to install all plug ins for playing dvd or video files in fedora in a non internet connected system. i had tried to install vlc media player but no luck. so please tell how to find this required plug ins and some security upgrades for fedora 12 . i want to write them all into a disk . and want install them to my fedora desktop whenever i need them! or tell me how to install these plugins without connecting to internet
View 2 Replies View RelatedWhat the most harmful thing can malware program started as separate limited user account do if it has access to the X server? Network and filesystem things are already considered by chroot and netfilter.
It obviously can lock the screen and I will need to switch to other vt and kill it manually. Can it for example disrupt other GUI programs on the same X server (access a root terminal in nearby window)?
I know that it is safer to run it in separate X server, for example, in Xtightvnc or even some virtual machine, but how dangerous is to just run it like other programs?
Everything works fine; No problems running WinXP from an ISO, etc. I have several Windows only applications which I want to run on the WinXP VM. I cannot see the programs I have downloaded when using Explorer for Windows.Ordinarily, in a WinXP only system, I just find the program to be installed and double click on it to start the automatic installation routine.In this case, I cannot see any of the .exe files used for the install.I have placed those downloaded Windows application in the same directory on my Ubuntu Box as where VirtualBox, the Sun Guest Editions and the CD Image of the Garmin Trip and Map system.I installed the Garmin system directly from and ISO of the CD I made using Brasero. It works without a hitch.Should I take the Windows e.e programs and burn them to a CD and then transfer them as ISO tback to the VM drive?
View 3 Replies View RelatedI'm running Ubuntu 10.04, and for some reason I get a segfault whenever running programs with OpenGL. I ran "lspci | grep VGA" in the terminal and this is the output:
Code:
02:00.0 VGA compatible controller: ATI Technologies Inc M92 [Mobility Radeon HD 4500 Series]
i used to run wine and a windows chat program. I got away from linux for a while, but now am back, but the same program i used to run, now gives and error.. to check my internet connection. <urlopen error [Errno 5] Access denided> I gave the program the permission to run, but what am i missing?
View 9 Replies View Relatedso i've just been sitting here, compiling and running some c++ programs (with g++ from the terminal), I looked away for one minute to open a file that had just been written out (opened it with gedit if that makes a difference), now my terminal says:kbuildsyscoca4 running...so I'm wondering if anyone knows what this is about?hy it suddenly started running and why it has appeared on my terminal. I'm basically just curious as I though bash shells were entirely separate virtualizations of shells, and unrepresentative of other processes. i'm also wondering what kbuildsyscoca4 is/does (i've got gnome going on and generally gnome varieties of programs). I found a post from about a year ago mentioning the same thing, though no replies.
View 1 Replies View Relatedim try to run modding programs for xbox which are all for window (.exe) but the ones that dont have an install they just click and run in windows dont open my laptop thinks about it and doesnt open them here are the programs that dont work
mw2 clan edit
ezgt2.2
lefluffie
usb xtaf xplorer
modio
Trying to write a script for desktop launchers that are adaptable to screen resolution. Ideally, the program should:
1. Determine screen resolution:
if "a" use xdotool options window size 1305 x 869 px and move to 135,0
if "b" use xdotool options window size 1545 x 1019 px and move to 135,0
2. Check if program running:
if no, open program, and use "a" or "b" placement options, focus window
if yes, focus window
3. Close script and leave program open (if possible).
Problems arise when trying to use the script on programs that run from and hog the terminal
(e.g. brasero, gcalctool, nautilus)
Here the script will load the program, and nothing else (probably because it still occupies the terminal as it runs)
Code:
gcalctool && xdotool search "calculator" windowmove 135 0
This next command will cause the program to load, move, but it keeps focusing itself like xdotool is running the windowmove function constantly - it keeps focusing itself until script stopped.
Code:
gcalctool & xdotool search "calculator" windowmove 135 0
This had the same effect as the above code, but seems to work as a conditional subscript running when the process is running in the terminal - it just goes infinitely.
Code:
while [1] ; do xdotool search "calculator" windowmove 135 0 done exit
Is there some kind of "if, then" or "while, do" or some kind of conditional I can put in to the script ensure the window is moved only once if the program is running within the terminal? Is there a way to remove the program from the terminal from the script once it's been called?
I have successfully created a dual boot system on my Aspire One net book computer with Windows XP and Ubuntu for net books. When I use the software installer the program icon shows up but when I click on the icon nothing happens. All of the software that was installed when I installed Ubuntu works fine. The software in question is a flight simulator named Saber.
View 1 Replies View RelatedI cannot run executable files from my home folder. I just double click it and it doesn't do anything.
View 1 Replies View RelatedI am trying to replicate what is happening on this page under the tcsh shell, but using the bash shell found in Wheezy. Here is the page I am referring to:[URL] The command I am trying to replicate is on page 6 under figure 2.4. The command is "prompt> ./mem &; ./mem &".
I would like to run the same program twice, concurrently, but do not know how. Note that I am not trying to use a bash script, but rather by simply using syntax on the command line.
Installed version are:openSuse 11.2KDE 4.4.4After installing some upates does my firefox will not starts anymore. And I have no idea why. It's seems not really a problem with firefox itself, because some other programs can't be started as well. Such as eclipse or Googles ChromeIt's appears only for few secounds the program in the task bar, and disappears then. Is there some log file or something like this, there I could see what happens in the start procedure of the firefox program
View 3 Replies View Relatedyou can see below my taskbar Imageshack - snapshot1dj.png I would like to make the different programs running and shown at taskabar firefox,Fslint, Thunderbird to have some borders around them,
This will make them appear more clear to me.
System -> Preferences -> Startup Applications -> Options -> Remember Currently-Running Applications I have Skype added to the startup applications list. This works fine. After doing the above, two instances of Skype are starting up every time - and I have not checked the "Automatically remember ... " checkbox. I could not find a way to undo this. After doing the above again, three instances of Skype are starting up every time.
View 3 Replies View Related
