What files or programs have the ability to change your default network scripts and config files? All 3 of these very important files got changed on their own.
/etc/sysconfig/network-scripts/ifcfg-wlan0
/etc/sysconfig/networking/devices/ifcfg-wlan0
/etc/sysconfig/networking/profiles/default/ifcfg-wlan0
I have some users authenticated with AD and some locally, I want to allow only local users and root to change their password with passwd, not users authenticating over AD - so far I have this in my /etc/pam.d/passswd file
password sufficiant pam_unix.so shadow nullok audit
password required pam_echo.so
You CANNOT change your password using the Linux passwd command
[code]....
This works fine in allowing my normal users to change passwords and my AD users to be blocked, however, root cannot change passwords - the pam_rootok module seems only to work for auth - is there a way I can define root as a sufficiant check for password?
I'm using F12 on an old box which I have fitted with a new networkcard. I'm using the box as a music server (Twonkey) and want to use the new card (gigabit - eth1) as the default, but seem unable to. I can't switch of the mainboard ethernet option (eth0) in the bios and have tried to change the settings in the ifconfig-eth0 and -eth1 files by changing the hardware addresses as elsewhere recommended, but that doesn't work. During start-up it then gives me an error message that the MAC number was not the expected one. This would indicate that the network options are kept/read elsewhere. I'm not very familiar with Linux/F12. how to make the card the default option instead of the mainboard option.
View 8 Replies View RelatedWhere is the location of file which holds information about open with dialog? I need to edit it to change default programs that open certain files?
View 3 Replies View RelatedThe problem is that KLauncher seems to periodically lose the ability to launch programs. Sometimes an error dialog pops up: "Error launching /usr/share/applications/kde4/ksysguard.desktop. Either KLauncher is not running anymore, or it failed to start the application." (I verified that KLauncher is in fact still running). Other times, the pointer icon bounces and the placeholder shows up in my task bar, but then it all goes away without any error.
There doesn't seem to be any pattern as to what's running when this happens, or how much memory is in use, or what I launch, or anything else. Sometimes, if I start closing apps that are already open, then the thing I tried to launch will start up. Other times, I have to actually log out and back in before I can get anything to start. Other than that, the desktop continues to behave normally. Nothing seems to be locked up or anything. It's very strange.
Can I change the default path for any or all of the different crontab files?
Can they be changed independently? for example can the user mark get one path for cron jobs, Lynn get another, and root get yet a third, or are they always going to be the same?
How do I change them?
Hello fellow Linux users:
I know there are several crontab files on my computer. One each for each user, and it looks like one for root, maybe others?
I think there is only one cron handler that reads all the different crontab files and does what it is told.
If I do from my command line, I get:
Code:
mark@server:~$echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
If I schedule a similar command in my own crontab file by using
Code:
mark@server:~$crontab -e
with the following line:
[Code].....
I'm new to Debian. I've read the documentation on this but it is too heavy for a new user to understand. I would like to change the default permissions for newly created files/directories.
I want all newly created files by 'user1' to have the default permissions of:
1. "owner can read and write"
2. "group can read and write"
3. "other can read only"
Permission 1 and 3 are already default. But I would like number 2 to be default as well. (the current default for group is read only).
i want to change the default format of open office files permanently. Like if i save a file it saves as .odt i want to change it to .doc
View 4 Replies View RelatedI've been struggeling with this for a few hours now, googleing and so on trying to find an easy way to just switch which device I want as primary for internet connections. After long battles I'm at a loss, this is the current automatic routing
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
85.225.76.0 0.0.0.0 255.255.252.0 U 1 0 0 eth0
85.225.76.0 0.0.0.0 255.255.252.0 U 2 0 0 wlan0
[Code]...
I am using emacs+auctex for latex editing now, I want to change the default viewer for dvi files, since xdvi doesn't render correctly most of my documents; okular works perfectly, though I cannot make it the default viewer I went into the AUCTex manual, and there is a tex-view-program list that should contain the list of viewers, but I cannot find the way to customize that variable.
View 6 Replies View RelatedI'm on OS X and mount a network share from my Windows XP machine. Files by default have the rwx (700) permissions. What OS X option I need to change, that the files will have rw (600) permission?
Maybe this question also applies for Linux mounting a Windows network share.
Using PHP 5.2.10 on CentOS 5.4. I need to run a PHP call that will extract all the files from a .zip file. Is there a function to do this or something in PHP I need to enable or install?
View 1 Replies View Relatedi have a C program which creates an executable file in linux after that we can use that exe file and decode any file which is encoded by flatedecode algo now i have to write a C program... which reads a file.....use the above mentioned exe file and den post the decoded output.... i am in need for a code in C which can run EXE files and perform some function...
View 1 Replies View RelatedI can only get so far and then I find myself staring at the menu.lst (/boot/grub) in gedit. It looks nothing like the menu.lst in Linux Mint 7 and I know that tampering with the menu.lst could spell disaster. So how do I go about changing my default OS to Vista? I have been tinkering with distros for quite some time now but still not a pro.Take a look at what I got below.
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,1)
# kernel /vmlinuz-version ro root=/dev/mapper/vg_localhost-lv_root
# initrd /initrd-[generic-]version.img
# boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,1)/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.31.6-162.fc12.i686)
root (hd0,1)
kernel /vmlinuz-2.6.31.6-162.fc12.i686 ro root=/dev/mapper/vg_localhost-lv_root noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
initrd /initramfs-2.6.31.6-162.fc12.i686.img
title Fedora (2.6.31.5-127.fc12.i686)
root (hd0,1)
kernel /vmlinuz-2.6.31.5-127.fc12.i686 ro root=/dev/mapper/vg_localhost-lv_root noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
initrd /initramfs-2.6.31.5-127.fc12.i686.img
title Windows Vista
rootnoverify (hd0,0)
chainloader +1
Whenever I use lpr on the command-line to print a text file, it uses DejaVu Sans Mono as the font. Is there a way to change this? I'd like to use Terminus as the font instead. I found that CUPS uses Courier as the default font for text files, so somewhere Courier is being aliased to DejaVu Sans Mono, and I have no idea where.
View 2 Replies View Relatedis it possible to change the GDM default skin on Fedora 14? I searched the web and this forum, but didn't get a working solution for it.
View 3 Replies View RelatedI'm somewhat of a n00b. I have a dual boot machine running XP and Fedora Core 14. I like my default boot always to be XP. Right now, XP is default BUT every time there is an update to Fedora, it will change the default to Fedora. I now have to edit grub.conf to boot from xp again. Is there a way to make xp always as the default even after an update?
View 2 Replies View RelatedI installed Fedora 12 LXDE spin and its default session was LXDE. Then I downloaded XFCE and tried to change the default session of GDM to XFCE. I edited ~/.dmrc and /etc/sysconfig/desktop but this didn`t change anything. I was unable to find where GDM stores its default setting.
Is there any way to change GDM default session?
And more important: is there any way to make GDM to store different default sessions for different users?
I have a fileserver running openSUSE 11.2 and samba services for file access from MS Windows based workstations. My question relates to changing default permissions on files and directories created from the windows clients.
Following are extracts of the /etc/samba/smb.conf file :
Even with the above entries, sometimes there are files and directories created by the windows clients having permission
Probably my lack of understanding in ACLS.
I'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
How do I change my default keyring password in F11?
The instructions from here no longer work:
Code:
$ yum search gnome-keyring-manager
Loaded plugins: dellsysidplugin2, fastestmirror, refresh-packagekit
Warning: No matches found for: gnome-keyring-manager
No Matches found
Longer story:
Somehow I got my keyring and login passwords out of sync. I went to change my login password using passwd on the terminal. I meant to change it to (let's say) "abcdef" but typed "abcdfe" twice. Realizing my mistake I tried to used passwd a second time to change it to "abcdef", but passwd complained that the new password was too similar to the old. So I used "su -c 'passwd myusername'" - I was able to change my login password but I guess this did not update my keyring password. I've tried changing my password using passwd as myself (not root) to something completelydifferent, but my keyring password remains the first password (e.g. "abcdfe").
my last Fedora installation, the pulseaudio source is wrong. The default sink is:
[code]...
How can I permanently change the Default source to be:
[code]...
When I change it on desktop login as regular user to the right thing, then log out or reboot, I have to change it again when I log back in again. This is with an Audigy2 card, and onboard audio chip. I switch between the two for various reasons.
I want to change the default path for logs in Jboss running on Fedora box? How to do the same?
View 1 Replies View RelatedIn my laptop, if I type below
$ which vi
alias vi='vim'
/usr/bin/vim
Now I want to change the vi alias to another bin, e.g. vim_wrapper a script created in /usr/bin/, I type this line:
alias vi="vim_wrapper"
in ~/.bashrc or /etc/bashrc, but take no effects. So How to change the default vi alias vi='vim' to vi='vim_wrapper'?
I'm trying to change the desktop to KDE so that it's persistent across boots. I did the usual thing of adding /etc/sysconfig/desktop and adding the appropriate parameters, but for whatever reason, whenever I reboot, it still loads Gnome. Now here's where it gets annoying: I can switch to runlevel 3, type startx, and then it will read /etc/sysconfig/desktop and load KDE properly. I've been banging my head against a wall over this one. Where is the call made to start gdm? I think I'll probably wind up changing the default runlevel to 3, but I'm still curious as to why those scripts are not executed on boot.
View 1 Replies View RelatedI've been trying to research this, but I don't really understand IP routing and it's bugging me that I can't fix this problem. I have a dedicated server (fedora core 7) with 3 IP addresses on the same eth0 interface. On the default IP address 62.193.226.127, there is some routing problem because I can't connect from the server to some other sites. Using one of the other IP addresses, like 62.193.252.129, I can connect fine. Additionally this address is better for sending mail because it coincides with the main domain name from which the mail is sent.My question is: how can I configure networking so that outgoing traffic from the box goes via 62.193.252.129?
View 2 Replies View Relatedeverytime i use alsamixer command i get only the "Master" volume control, and i see the card its using is "Pulseaudio" so i press f6 to select the sound card and i found that i have "default" and "HDA SIS966" so i wanted to know how can i change that "default" to the HDA SIS966?.i tried pressing f6 and selecting the card but when i close alsamixer and run it again i get the "default" sound card again.
i left some pics, the 1st one is what i get when i run alsamixer, the 2nd is the options i got when i try to change the sound card, and the third is what i get with the card HDA SIS966 which is the one i'm trying to get as my default.
how to install programs, that i downloaded onto my windows XP computer,and they are for linux, i downloading it off a site.i just need to learn how to install it,and i need to find a media player that plays FLV files, as well as MP3 files, with the codec preinstalled,or how to install codecs.im sorry im really new to linux, i was considering switching to Mint, is that any better for media?
View 9 Replies View RelatedI have multiple gcc compilers in my laptop, how can I change the default gcc compiler?
View 2 Replies View RelatedHow to change default window manager in gnome?
View 6 Replies View Related