I install redhat server at virt-manger and i configure my rpms and others tasks and it works fine.
My question is how to get all configuration and data from this virt-manager server to use it at another PC virt-manager ?
I downloaded EasyPeasy (EP) to evaluate whether I wanted to put it on my wife's EeePC 900. I thought, why not install it in a virtual machine on my desktop system in order to play with it and see what needs to be done to get all the programs she will need working before I do the actual installation? So, I launched virt-manager, and tried to set up a virtual machine for EP 1.6. Well, it appears to be launching EP, but when it comes up, I have the top bar, but the tabs and lcons that should be on the desktop are nowhere to be found. When I try to shut it down, the shutdown freezes, so I wind up killing the virtual machine after waiting several minutes.
Every time I try to do this, I get the same results. This is whether I choose KVM or QEMU for the virtual machine. I have created it with 1 Gb RAM and 1 processor, then created a 16 Gb virtual drive. I started with 0 pre-allocated for the drive. I tried again one more time but this time actually allocating the full amount of the virtual drive before starting to see if it made any difference. It didn't.
I also noticed that it is not recognizing that I have a DVD with the ISO written to it (it is a bit too big for a CD). There is no option to use a USB thumb-drive or SD card that I can find. So, it appears I am stuck with using the ISO for this installation. It said that there was no disc in /dev/sr0 or /dev/sr1, even though the proper disc was there.
Under advanced options, I have tried both X86_64 and i686 with equally bad results.
For Linux versions, although there is an option for Fedora 13 as a guest, there is not an option for Ubuntu Lucid, from which EasyPeasy 1.6 is derived. I have tried several of the install versions from the list in an effort to get this to work. It didn't.
I have a VM with Windows XP that is driving me crazy. Everything works great except the display windows (and networking, but that is a different story) I am open VirtManager and go to display the OS and the images will get distorted. I will open IE and scroll down a webpage and some of the text will remain still and others will move, leave an image of garbage. This makes it very aggravating to use. To clear the page I can shake the window (using the cursor not my hands) or move from one tab to another till it clears.. then if I scroll again I have to deal with it all over again.
View 1 Replies View RelatedI tried virt-manager 0.8.0-7 or 0.8.1-1, my guest like fedora 12 i386, ubuntu i686, win xp do not have any sound even they detect the driver(es1370 or ac97) correctly. I doubt it is because of the pulseaudio and the qemu's user. Qemu uses not my user, it uses qemu user.
If I uses qemu-kvm directly, it has sound and work fine.
I'm using virt-manager with qemu/kvm to run a linux guest, but the console screen is TOO slow!
tessio@dhcppc0 ~]$ lsmod | grep -i kvm
kvm_amd 36872 6
kvm 257292 1 kvm_amd
tessio@dhcppc0 ~]$
When I access the guest with ssh and use it from there, it's fast like a real machine. It's only very very slow within virt-manager console. I am using Fedora 14 x86_64.
I have been trying to set up bridged networking, but I keep failing. I am using Fedora 14 x86_64 KDE as host with qemu-kvm and SPICE. The plan is to install a windows server, a few windows clients and then rawhide as guests on that. Naturally I want to use bridged networking for the windows guests.[URL]..But those both leave the guest without internet access. Is it really this difficult, or am I doing it wrong(tm)?
View 3 Replies View RelatedI'm a new fedora-user and are having some problems setting ut everything as i want:
The host to always use WIFI
The host to not see the ethernet-connection.
The guest to use ethernet
The guest to be able to get wifi when no ethernet is avaible.
The guest to install from PXE
The guest is going to be a Windows 7. Nothing is done so far, as i cannot figure out how to do this.
I'm running some vm's in FC12 with kvm-qemu and using virt machine manager. I'd like to have some ports automatically forward on startup and be able to add redirections on the fly. Redirection on the fly is talked about here, but I am getting lost on what should be basic instructions.[URL]
As far as startup, In the past I just ran qemu from the cli and manually specified redirection with redir. I can't figure out how to do it with The virt machine manager which I am using to start my VM's now. I do not want the guests to see the host. From cli startup without virt machine manager, it looked like this: qemu -m 256 -hda vm.img -redir tcp:5555::80 -redir tcp:5556::445 &
I have a tested and working ssh connection with my local network server. On Ubuntu it was simple to just add an ssh connection to Virtual Machine Manager to connect to 'hippopatamous.local' (yes thats the name of my server :P) but now that I'm in arch its different. I connect to the server using just 'hippopatamous' and on top of that its like the Virtual machine manager can't connect.
All it says is to make sure that libvirtd is running. I ssh-ed in to the server and make sure it was running. I even ran it on my local computer (this was before I remembered/realized this would be a server type daemon so running it locally wouldn't do anything)
I have a query regarding top & virtual memory. When we run top it show VIRT (Virtual Mem), RES (Resident Mem) & SHR (Shared Memory). The total virtual memory of my machine is 4 GBs (2 GB RAM + 2 GB Swap), but still I am able to see a process showing 4000m virtual memory column. what it means, as its show VIRT Mem more than actual available VIRT memory
View 1 Replies View Relatedi'm trying to install virt-manager , to run a couple of virtual machines, i created a virtual nic vnet0 and bridged it to my eth0, i have configured the /etc/network/interfaces file with proper static ip, but i beleive the network manager is renaming my nic to eth1 and causing all kinds of problems. I uninstalled network manager and now i can ping anywhere in the network, but not outside it. ie google.com
View 5 Replies View RelatedMy first post on openSUSE, since migrating from Ubuntu (didn't like Unity!). I've installed the virtualization packages from YAST2 and when I attempt to run virt-manager, it crashes. The error is
Code: could not import gobject (could not find _PyGObject_API object) I've searched both these forums and via a general Google and although I've found posts, all of them are apparently resolved - but not mine.
My laptop is fully up to date and running Gnome 3 on openSUSE 11.4.Has anyone else come across this lately?
i heared that both modules are used to create virtual environment for linux, but what are the comparisons between them which differentiate them could you please explain them in brief .
View 1 Replies View RelatedI just upgraded from 10.04 to 10.10 and now virt-manager won't start. If I try from the menu, nothing happens. If I try and start it from the command line (as root) it give the error:
GLib-GIO:ERROR:/build/buildd/glib2.0-2.26.0/gio/gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL)Aborted
I've tried searching and can't seem to find anything related, but was hoping this might make some sense to someone.
Unable to complete install: 'Invalid install location: Mounting location nfs://192.168.1.12/var/ftp/pub/ failed' when i try to make virtual machine using virt-manager. i get this error.why this occur,please tell i take these steps for making virtual m/c.
1 change system ip into static and install virtualization group.
2 make one partition where i want to install vitual m/c
3 then vim /etc/exports, in which i give path where is data and give rw permission to all. then restart services of portmap and nfs.
4 then on login with xen kernel and on terminal i give virt-manager command and follow steps. at last i get above error. where i m wrong,clearify me so i make vir m/c .
I've been using KVM with great results on Slackware but one thing about Xen 4 that appeals to me is VGA and PCI passthru. I did try to install the Xen Slackbuild some time ago but failed. I'm afraid I can't remember why now. As far as I remember the Slackbuild was just out a day or so, so perhaps there were unresolved issues in the early days. How is Xen now? Does it run as well as KVM, for HVM as well as PV guests? Does virt-manager allow you to create Xen VMs or just KVM VMs? I'm very happy with KVM on Slackware (and Xen on NetBSD) but as I say, the Xen 4 release has some enticing features which pretty much do away with dual- and multi-booting. Full-throttle graphics in a VM?
View 2 Replies View RelatedI installed the latest 10.04.1 server minimal install and enabled the virtualisation option. I compiled enough X so that I could run virt-manager and I was able to create a couple of VMs and run them and manage them, but the problem is that in the graphs in manager, I can only get CPU usage, not Disk or Network IO. The options are greyed out. Am I missing something required for these graphs to work ?
View 1 Replies View Relatedhow to get image of server with all configuration files and data. Without data loss.
View 5 Replies View RelatedI am running ubuntu 8.10 on an old gateway as a server. I have vent up and running just fine. I went to configure the ventrilo_srv.ini file and now that I have made the changes, I need to restart the server program, which I am having problems doing. The following command returns the following:
sudo /home/taylor/ventrilo/ventsrv/ventrilo_srv restart
Ventrilo Server - Public - Version 3.0.3
(c)Copyright 1999-2008 Flagship Industries, Inc.
Unable to open configuration file 'ventrilo_srv.ini'.
ERROR: Unable to read configuration data. Exiting.
What am I doing wrong? Did I change something that shouldn't have been changed. I only set the name to something other than default and set the admin password.
I'm trying to connect to the VPN of my employer; after fix various minor issues I reach this point in which the DNS entries and the default gateway of the VPN are overwritten with the values of the eth0 device that appears by default. Therefore the vpn is not useful.
View 1 Replies View RelatedI am working in a office where only one internet connection available. I have configured 5 other client machines to use internet through squid proxy server. Now I want to restrict the total data usage/transfer (upload+download) to say 1 GB during a calender month. How can I achieve this setting.
View 1 Replies View RelatedI am working in a office where only one internet connection available. I have configured 5 other client machines to use internet through squid proxy server. Now I want to restrict the total data usage/transfer (upload+download) to say 1 GB during a calender month. How can I achieve this setting.
View 1 Replies View Relatedif I want to do eth1, eth1:0, eth1:1 etc and automatically configure them at startup where do I put that in the network-scripts?
View 2 Replies View RelatedMy monitor kept powering down after 20 minutes so I installed Gnome-power-manager by yum so that I could change the settings. After the installation and every time I try to use it I get a message saying:
Quote:
Install problem!
The configuration defaults for Gnome Power Manager have not installed correctly. Please contact your computer administrator
I'm now unable to effect a change in the power settings and the display keeps turning off.
1) Is someone able to post their config file from a working F12 install? I believe it's /etc/dbus-1/system.d/gnome-power-manager.conf but not certain as I don't have one ;-)
2) ~/.gconf/apps/gnome-power-manager/%gconf.xml is empty - is it empty for someone with a working install?
3) how I can change the power settings without the gui - I'm googling on this point and will post the answer as and when I find it.
Code:
[ecvej@desktop ~]$ uname -r
2.6.31.5-127.fc12.x86_64
Edit: In case it is relevant, this is the contents of my /etc/gconf/gconf.xml.system/%gconf-tree.xml
[Code]....
I have tried to install debian 5.0 and 4.0 without any luck. I have both tried virt-manager and virt-install with both debian-501-i386-netinst.iso, and full dvd. I't always gives me the same error:Starting install.Could not find an installable distribution at '/xen/debian-501-i386-netinst.iso'
[Code]...
below is what happens when i try to run a install from the command line in virt-install. keep in mind that this is a fresh fedora12 install selinux is disabled logged in as root. i have never had so many problems with something and it is maddening for there to be a thousand freaking how-to's on the subject all acting like it is so freaking simple.
[Code]...
If you hadn't guessed it from my last 3000(ish) java-related posts, I'm a Java n00b writing a Java Applet for a work project. I got to the part was I was about to write the applet code that would send HTTP requests to my CGI scripts. But I read some paragraphs in a book praising Java servlets as better that CGI because they are easier to use and give much better performance server side. My server load isn't very big, though, and I was wondering if it would be worth taking the time to learn about Java servlets and how to set up the server side configuration on my Fedora web server.
View 3 Replies View RelatedI'm trying to access data from TFTP server which is running on my fedora 15, when i tried to read that file from TFTP path..i'm getting response as time out.. even i tried to get the data in localhost itself...there also i'm getting same time out.. i tried all permission mode.
View 1 Replies View RelatedI got this error during updating backend data server for evolution. "could not do simulate: gnome-panel-2.30.0-1.fc13.i686 requires libedataserver-1.2.so.11 : Success - empty transaction"
View 2 Replies View RelatedI've set up a caching nameserver on my laptop running Fedora 11. The problem with this is that NetworkManager always overwrites the entry that points to the local nameserver. NetworkManager no longer respects /etc/dhclient.conf or at least its scripts run after dhclient.conf. Also it doesn't respect /etc/sysconfig/ network-scripts/ifcfg-* setting of DNS{1.2}.The man page of NetworkManager describes scripts that run in /etc/NetworkManager/dispatcher.d which can be run when interfaces are brought up and down. I've written a script that will put the entry needed for the local nameserver.
View 1 Replies View Related