I'm using virt-manager with qemu/kvm to run a linux guest, but the console screen is TOO slow!
tessio@dhcppc0 ~]$ lsmod | grep -i kvm
kvm_amd 36872 6
kvm 257292 1 kvm_amd
tessio@dhcppc0 ~]$
When I access the guest with ssh and use it from there, it's fast like a real machine. It's only very very slow within virt-manager console. I am using Fedora 14 x86_64.
I downloaded EasyPeasy (EP) to evaluate whether I wanted to put it on my wife's EeePC 900. I thought, why not install it in a virtual machine on my desktop system in order to play with it and see what needs to be done to get all the programs she will need working before I do the actual installation? So, I launched virt-manager, and tried to set up a virtual machine for EP 1.6. Well, it appears to be launching EP, but when it comes up, I have the top bar, but the tabs and lcons that should be on the desktop are nowhere to be found. When I try to shut it down, the shutdown freezes, so I wind up killing the virtual machine after waiting several minutes.
Every time I try to do this, I get the same results. This is whether I choose KVM or QEMU for the virtual machine. I have created it with 1 Gb RAM and 1 processor, then created a 16 Gb virtual drive. I started with 0 pre-allocated for the drive. I tried again one more time but this time actually allocating the full amount of the virtual drive before starting to see if it made any difference. It didn't.
I also noticed that it is not recognizing that I have a DVD with the ISO written to it (it is a bit too big for a CD). There is no option to use a USB thumb-drive or SD card that I can find. So, it appears I am stuck with using the ISO for this installation. It said that there was no disc in /dev/sr0 or /dev/sr1, even though the proper disc was there.
Under advanced options, I have tried both X86_64 and i686 with equally bad results.
For Linux versions, although there is an option for Fedora 13 as a guest, there is not an option for Ubuntu Lucid, from which EasyPeasy 1.6 is derived. I have tried several of the install versions from the list in an effort to get this to work. It didn't.
I have a VM with Windows XP that is driving me crazy. Everything works great except the display windows (and networking, but that is a different story) I am open VirtManager and go to display the OS and the images will get distorted. I will open IE and scroll down a webpage and some of the text will remain still and others will move, leave an image of garbage. This makes it very aggravating to use. To clear the page I can shake the window (using the cursor not my hands) or move from one tab to another till it clears.. then if I scroll again I have to deal with it all over again.
View 1 Replies View RelatedI tried virt-manager 0.8.0-7 or 0.8.1-1, my guest like fedora 12 i386, ubuntu i686, win xp do not have any sound even they detect the driver(es1370 or ac97) correctly. I doubt it is because of the pulseaudio and the qemu's user. Qemu uses not my user, it uses qemu user.
If I uses qemu-kvm directly, it has sound and work fine.
I have been trying to set up bridged networking, but I keep failing. I am using Fedora 14 x86_64 KDE as host with qemu-kvm and SPICE. The plan is to install a windows server, a few windows clients and then rawhide as guests on that. Naturally I want to use bridged networking for the windows guests.[URL]..But those both leave the guest without internet access. Is it really this difficult, or am I doing it wrong(tm)?
View 3 Replies View RelatedI install redhat server at virt-manger and i configure my rpms and others tasks and it works fine.
My question is how to get all configuration and data from this virt-manager server to use it at another PC virt-manager ?
I'm a new fedora-user and are having some problems setting ut everything as i want:
The host to always use WIFI
The host to not see the ethernet-connection.
The guest to use ethernet
The guest to be able to get wifi when no ethernet is avaible.
The guest to install from PXE
The guest is going to be a Windows 7. Nothing is done so far, as i cannot figure out how to do this.
I'm running some vm's in FC12 with kvm-qemu and using virt machine manager. I'd like to have some ports automatically forward on startup and be able to add redirections on the fly. Redirection on the fly is talked about here, but I am getting lost on what should be basic instructions.[URL]
As far as startup, In the past I just ran qemu from the cli and manually specified redirection with redir. I can't figure out how to do it with The virt machine manager which I am using to start my VM's now. I do not want the guests to see the host. From cli startup without virt machine manager, it looked like this: qemu -m 256 -hda vm.img -redir tcp:5555::80 -redir tcp:5556::445 &
i'm trying to install virt-manager , to run a couple of virtual machines, i created a virtual nic vnet0 and bridged it to my eth0, i have configured the /etc/network/interfaces file with proper static ip, but i beleive the network manager is renaming my nic to eth1 and causing all kinds of problems. I uninstalled network manager and now i can ping anywhere in the network, but not outside it. ie google.com
View 5 Replies View RelatedMy first post on openSUSE, since migrating from Ubuntu (didn't like Unity!). I've installed the virtualization packages from YAST2 and when I attempt to run virt-manager, it crashes. The error is
Code: could not import gobject (could not find _PyGObject_API object) I've searched both these forums and via a general Google and although I've found posts, all of them are apparently resolved - but not mine.
My laptop is fully up to date and running Gnome 3 on openSUSE 11.4.Has anyone else come across this lately?
i heared that both modules are used to create virtual environment for linux, but what are the comparisons between them which differentiate them could you please explain them in brief .
View 1 Replies View RelatedI just upgraded from 10.04 to 10.10 and now virt-manager won't start. If I try from the menu, nothing happens. If I try and start it from the command line (as root) it give the error:
GLib-GIO:ERROR:/build/buildd/glib2.0-2.26.0/gio/gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL)Aborted
I've tried searching and can't seem to find anything related, but was hoping this might make some sense to someone.
Unable to complete install: 'Invalid install location: Mounting location nfs://192.168.1.12/var/ftp/pub/ failed' when i try to make virtual machine using virt-manager. i get this error.why this occur,please tell i take these steps for making virtual m/c.
1 change system ip into static and install virtualization group.
2 make one partition where i want to install vitual m/c
3 then vim /etc/exports, in which i give path where is data and give rw permission to all. then restart services of portmap and nfs.
4 then on login with xen kernel and on terminal i give virt-manager command and follow steps. at last i get above error. where i m wrong,clearify me so i make vir m/c .
I've been using KVM with great results on Slackware but one thing about Xen 4 that appeals to me is VGA and PCI passthru. I did try to install the Xen Slackbuild some time ago but failed. I'm afraid I can't remember why now. As far as I remember the Slackbuild was just out a day or so, so perhaps there were unresolved issues in the early days. How is Xen now? Does it run as well as KVM, for HVM as well as PV guests? Does virt-manager allow you to create Xen VMs or just KVM VMs? I'm very happy with KVM on Slackware (and Xen on NetBSD) but as I say, the Xen 4 release has some enticing features which pretty much do away with dual- and multi-booting. Full-throttle graphics in a VM?
View 2 Replies View RelatedI installed the latest 10.04.1 server minimal install and enabled the virtualisation option. I compiled enough X so that I could run virt-manager and I was able to create a couple of VMs and run them and manage them, but the problem is that in the graphs in manager, I can only get CPU usage, not Disk or Network IO. The options are greyed out. Am I missing something required for these graphs to work ?
View 1 Replies View RelatedI have a query regarding top & virtual memory. When we run top it show VIRT (Virtual Mem), RES (Resident Mem) & SHR (Shared Memory). The total virtual memory of my machine is 4 GBs (2 GB RAM + 2 GB Swap), but still I am able to see a process showing 4000m virtual memory column. what it means, as its show VIRT Mem more than actual available VIRT memory
View 1 Replies View RelatedI have a tested and working ssh connection with my local network server. On Ubuntu it was simple to just add an ssh connection to Virtual Machine Manager to connect to 'hippopatamous.local' (yes thats the name of my server :P) but now that I'm in arch its different. I connect to the server using just 'hippopatamous' and on top of that its like the Virtual machine manager can't connect.
All it says is to make sure that libvirtd is running. I ssh-ed in to the server and make sure it was running. I even ran it on my local computer (this was before I remembered/realized this would be a server type daemon so running it locally wouldn't do anything)
New clean install of Fedora 12 (my worst Linux experience so far, should have sticked with Fedora 9, it was old but it was stable, unlike this half-backed... whatever it is). Anyway, to the matter at hand (one of the many):How do I switch to the console from the graphical login screen? CTRL+ALT+Fn doesn't work, CTRL+ALT+Backspace doesn't kill X, it's a NIS machine with only root as local account
View 2 Replies View RelatedI used my fc13's "Virtual Machine Manager" to install a FC14 vm image from a new iso.After a week of 8 hour days I got fc14 installed, I think that the "minimal" install option was bad. Now it takes yum 15 minutes to get warmed up. and about an hour for 1 simple package.(It was going in the background while working on other stuff, causing the cpu fan to roar with the extra load)It would be easier to install Fedora on an abacus or perhaps water clock.
View 2 Replies View Relatedvirtual console (run level 3,5) screen resolution. After installing fed12 the resolution is higher(which is good) then in previous versions. After upgrading from 11 -> 12 the resolution of the virtual consoles stays the same, to large. I already compared grub.conf,i18n which are the same. Where is the resolution configuration for fed 11,12?
View 2 Replies View RelatedAfter install of FC13, my command prompt console and tty virtual consoles are a small box in the upper left corner of the screen. It contains tiny 80 characters by 25 rows. I want to fill the screen the old way. I assume the problem is high value screen resolution set automatically to match my display; with fonts based on the smaller pixels. This is NOT X-Windows. I can set that resolution but it has no effect on tty consoles.
It is NOT grub, which I can set with kernel parameter vga=0 to do exactly what I want. Messages from grub are big letters but change to tiny ones at init ("press 'I' for interactive startup" and the beginning of the boot log). This is not an issue with the same display using FC10 and no vga= parameter. Is there a reason that the kernel parameter failed after grub? Can I specify console resolution?
The Gnome Window Manager worked fine with the ProSavage video card under Fedora 10. But after switching to Fedora 11, the Gnome Window Manager's response to graphics requests (such as selecting or moving a window) has been very slow and choppy, when running from the Live CD and from the Hard Drive. The hardware configuration is the following:
-S3 ProSavage video card
-AMD Athlon(tm) XP-M 1700+ 1.46 GHz
-2 GB RAM
After installing Fedora 11 to my Hard Drive, I installed the following packages, hoping that would fix the problem:
xorg-x11-drivers.i586
system-config-display.noarch
After installing the packages and restarting my machine, Fedora 11 detected ProSavage card. The 'savage' driver was loaded during startup (according to dmesg) and the ProSavage card appeared in the Display configuration, when I selected System|Administration|Display. Unfortunately, I didn't detect much improvement. Here's the entry from dmesg: [drm] Initialized savage 2.4.1 20050313 for 0000:01:00.0 on minor 0
As a comparison, I tried running the Fedora 11 Live CD on a box with an ATI Radeon video card and the Gnome Window Manager was smooth and responsive.
I have tried this with many different configurations, however, I believe that the scroll bar that shows the progress of the boot is preventing it from changing successfully. I don't know how to switch it off. X is not installed. No gui, only tui.
View 5 Replies View RelatedThe 14" (pretty sure of the size) LCD monitor is hooked up with "digital input" (not the VGA or whatever). I tend to use the console (i.e. ttyX) more than X windows, and it is extremely slow refreshing. A concrete example is opening a man page, or cat-ing a file go so slow it takes a second or 2 for them to fully display.
Is this a video driver issue? Here are some stats:
Code:
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev
[Code].....
I have been using Windows on my laptop, but recently switch to Fedora 14. However, there seems to be a screen refresh rate issue that i didn't encounter when using Windows. The symptom is that when I scroll down through the browser page, the content become gibberish and unreadable. I have to do a refresh to read that content.
I did some searching on the Internet and found that it may be able to fix by updating driver, but i have no idea what and how to do it. can someone suggest a solution? can i use yum?
Code:
if I want to do eth1, eth1:0, eth1:1 etc and automatically configure them at startup where do I put that in the network-scripts?
View 2 Replies View RelatedThere is this [URL] but unfortunately, it is under X11. A console based one for Linux, does it exist?
View 5 Replies View RelatedMy wireless works without issue with network manager. However I notice that it seems to be a gui only app. That is, when I stop the display manager my laptop loses internet connectivity. The NetworkManager service is still running. Is there a commandline method of using the NetworkManager settings to start the wireless connetion?
View 14 Replies View RelatedLooking for console based calendar / time manager (or backend)? Well is there a good one to be known? Maybe else than 'when'? Joe Barr has written a nice intro to the program in his column at linux. [URL]. Is there some backend and frontend that could be used? Or alternatively, could it be possible to have them on an Kerberos/Ldap system or exchange server? What are the best and multiplatform single cal database possibility?
View 1 Replies View Relatedwhen i try to access synaptic package manager and update manager or ububtu software center. the screen will flash and be gone
View 7 Replies View Related