Red Hat / Fedora :: Add Windows Machine To LDAP?
Feb 11, 2010tel me how to add windows XP machine to LDAP domain
View 2 Replies
ADVERTISEMENT
Fedora Networking :: LDAP Enabled - Machine Will Not Boot Past Starting Messagebus
Aug 18, 2009I have a Fedora 11 PC, which I want to connect to the ldap server at my organisation. When my /etc/ldap.conf file is in place, the machine will not boot past "starting system messagebus" and just hangs there. I have to press the reset button, and boot it into single user mode, and remove /etc/ldap.conf, and only then will it boot. The ldap.conf file is fine, I think, because if you boot the machine up without ldap.conf, then log in.
I can put ldap.conf in place and immediately I can see all the user accounts etc. from the ldap server. If I then reboot, with ldap.conf in place, it hangs on boot again. I found a bug report for FC5 which stated this problem, but there was no solution. There was a workaround, making messagebus starting later in the boot process (move it from S22 to S27 in rc3/5.d), but that didn't help in my case.
My ldap.conf contains this (I've removed my actual ldap info):
host my.server.ip.addr
base dc=my,dc=dn
uri ldap://ldap.mydomain.com
ssl no
tls_cacertdir /etc/openldap/cacerts
pam_password md5
bind_policy soft
As I say, I think the ldap config is fine, because you can start it manually once the machine has booted up without an ldap.conf in place. I lifted it from a Centos client, which works fine and doesn't have the same problem with booting that Fedora does.
Red Hat / Fedora :: Make Machine To PXE Boot Windows From Another Machine Having RHEL5.2?
Jul 23, 2010I want to make my machine to PXE boot windows from another machine having RHEL5.2. I know the procedure to PXE boot linux, but I want to know is it possible to PXE boot your client machine with windows XP.
View 1 Replies View RelatedFedora Servers :: Configure LDAP And Client On Windows XP
May 29, 2009I'm new LDAP kind of stuff.I want to configure LDAP server and Client on windowsXP. could you tell me which Open source LDAP Server and client are best fit for windowsXP. Is OpenLdap not suitable for windows?
View 8 Replies View RelatedFedora :: Run Xming Which Is A Xserver For Windows To Display On Windows Machine?
Apr 23, 2010I currently have two computers at my desk, 1 is Fedora 12 and the other is Windows Vista. I am using the synergy client to share mouse/keyboard but I would like to run Xming which is a Xserver for windows to display on my Windows machine. I have 3 monitors 1 is connected to the Linux machine and then I have 2 connected to the windows vista and I want to share 1 one using a windows Xserver. I have the server installed and setup on my windows machine and I just curios on how to configure my Xorg.conf file to use my Xming Xserver as a seccond monitor.
View 3 Replies View RelatedCentOS 5 Networking :: PDC With Samba And LDAP - Adding XP Machine?
Jul 31, 2009I have a running PDC with Samba and LDAP. But when I want to join the Domain with an XP Pro Client I just get following error message.
"A Device connected to the System is not working".
Server :: How Do A User Can Change Its LDAP Password On Client Machine
Jun 5, 2009I have configured LDAP Server on RHEL 5.2 successfully and client can login to the server. But I do no how a client can change its LDAP password on his client machine.
View 5 Replies View RelatedFedora :: F13 SSSD And LDAP (ldap.conf) / Appear /etc/ldap.conf Is Being Ignored?
Oct 21, 2010I have LDAP authentication working via SSSD using authconfig-tui and a few minor modifications to sssd.conf (ie: max_id etc). The problem I am having is it would appear /etc/ldap.conf is being ignored and/or setups that work perfectly on RHEL5, F11 and F12 no longer work on F13. Specifically Im referring to "pam_check_host_attr" and "nss_map_attribute". It refuses to honor either of these options and I can only assume a number of the other options in our ldap.conf. For instance, "nss_map_attribute" is defaulting to the standard "homeDirectory" rather than "homeDirectoryLinux". This is related to a bunch of OSX clients we have and its not optional to use another setup. The host restriction is also a major issue.
Relevant sssd.conf:
[domain/default]
auth_provider = ldap
cache_credentials = True
Fedora :: Windows Print On Machine ?
Aug 25, 2009My computer is Linux (FC11). My laptop is Linux (FC10). My printer Canon MP630. Connected to my computer. Prints fine from either computer or laptop. Love it. Linux easy for printing. My boss even thinks so.
Share is enabled with all users.
I cannot get my wife's Vista/Home Basic laptop to print via FC11. Have tried adding with server. nada. Tried adding with TCP/IP. nada. . smb\Towerprinter. nothing. [url] nothing + every combination there of.
Red Hat / Fedora :: Mac Machine With Windows Domain?
May 30, 2010how can i join linux and mac machine with windows domain?
View 1 Replies View RelatedRed Hat / Fedora :: Add Machine To Windows Domain?
Dec 15, 2010I have a windows domain enviornment. I have linux(5.4 veron) box in which I have configured proxy server. Now I want to add this linux box to the windows domain. me know the steps for adding this linux box to windows domain.
View 1 Replies View RelatedFedora :: Use Existing WIndows 7 As Guest Virtual Machine In Fedora 12
Apr 5, 2010My company's default OS is Windows 7. I convinced my manager so that I could use Fedora 12, since I am mostly familiar with development environment in Fedora. However there are a few things I need in Windows 7, and I want to stop going back and forth in two OS'es in dual boot-up setting.
I've searched online for easy way to use the existing Windows 7 as guest virtual machine. I first tried VMware's Vcenter Converter Standalone in Windows 7, but it failed with some error code, and searching the particular error code didn't turn up any solution. I also tried to use Sun's VirtualBox, but I get segmentation fault error in Fedora. I tried to see if VMware server has a tool, but installation exists with an error, and searching the web for the error code didn't turn up anything either.... I wonder if I am having this much difficulties because I am using x86_64 version of OS'es.
Anyhow, if anyone has done it successfully - using existing Windows 7 as guest virtual machine in x86_64 version of Fedora 12.
Ubuntu Networking :: Access Machine Via Windows Machine - Samba Password Reset?
Feb 13, 2011I try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies View RelatedUbuntu :: Numbers To Put In Linux Machine Can Connect / Print To Windows Machine?
Apr 16, 2011I remember it being really easy to add a printer attached to another computer using Ubuntu, but I don't remember exactly what made it so easy. All I know is that now that I have switched to Kubuntu the process has become much harder because now I have to find out some special locations, numbers etc. for it to connect to the printer. It's connected to a Windows XP machine on the other side of the house.
It says alot about 'contacting the network administrator' if I am unsure about what to put in. But I am more or less the network administrator. how to find out what numbers to put in so that my Linux machine can connect and print to the Windows machine? Or maybe someone knows a few commands to share? I go to Applications > Settings > System settings, Printer configuration, New Printer, New Network printer, and then there are a few options but I don't know which one to choose. Windows Printer via Samba, I guess? Then in the box that says smb://[enter stuff here] I need to put in info but I don't know how to find that info.
Fedora Networking :: Cannot Connect To Windows Machine
Sep 23, 2009I installed samba and samba-client (sudo yum install samba samba-client) but I still cannot connect to this Windows machine.I installed samba, started the samba services (although that may only by necessary to connect into Fedora?), and even restarted the computer and I still cannot do this, I have been googling like crazy and only se articles on how to make Fedora a samba server...
View 3 Replies View RelatedFedora X86/64bit :: Run Windows In A Virtual Machine On 14?
Jan 20, 2011I want to run 64bit windows in a virtual machine on my fedora 14 64bit. using virtual machines and want to know what is recommended for fedora 14 and if 64bit vm's are supported yet.
View 5 Replies View RelatedRed Hat / Fedora :: Mount Windows Directory On Machine (5)
Jan 22, 2010How to mount windows directory on Linux machine (Red Hat 5)?
View 2 Replies View RelatedUbuntu Networking :: Way To Share Folder From Machine To Windows Machine
Aug 28, 2010I am trying to establish the easiest way to share a folder from an Ubuntu machine to a Windows machine.In the past I have added things to smb.conf and that has all worked fine but what I am trying to do is to figure out what the "new user" way of doing this is so that when I am helping other people I know I am getting them to do the simplest thing.I completely removed samba and reinstalled it so that I didn't have any configuration. Right clicked on a folder and selected "Sharing Options" ticked the "Share this folder box" gave it a name and a comment and ticked the other two boxes.
When I went to the windows laptop then it kept asking for a username/password and nothing worked.Back on the ubuntu machine I did sudo smbpasswd -a [username] and created a blank password. Now from the windows machine I can access the shared folder.Is the smbpasswd step still required? It's very confusing for a new user as there is no suggestion that anything other than right clicking on the folder and choosing the options you want would be required. Is it something to do with the fact that this is an ubuntu machine that has gradually been upgraded through versions and this problem wouldn't have been there from a new install?
Networking :: Access A Windows Server 2000 Machine Using A Machine Via KDE?
Apr 9, 2010I need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies View RelatedNetworking :: Transfer Files From A Machine To A Windows Machine Which Are Not In The Same Network?
Jul 6, 2010I had run one script in unix machine and want to copy the results to a windows machineBoth the machines are on different networksIn linux machine trying to do the ftp to the windows machine its giving connection refused. How to chech whether ftp is running on that linux machine or not?Also tried scp and ssh , both are failing
View 6 Replies View RelatedFedora Networking :: Access Windows Share From Machine
Nov 2, 2009he moved in a new place and there is a huge share on the network machine which runs windows... however he has fedora 10 installed on a desktop pc with a big screen and asked me to configure it so it can access the share... i have almost no experience with fedora and i've been trying to do this for two days now... i installed the samba package, but now what? how to do this because the exact commands are unknown to me... i have the root password and everything else on the network... so i just need to know what ot write in order to be able to mount all the TBs of information on the server...
View 4 Replies View RelatedFedora :: Small Windows Size Virtual Machine
Jan 12, 2010i am running now Windows 7 on a virtual machine.the windows of the VM remains small.when i resize the windows,, the desktop window of windows 7 remains the same size.is that normall?i would like to have a reasaneble windows size of the VM
View 4 Replies View RelatedUbuntu :: How On Earth Do I Access Machine From Windows Machine
Feb 22, 2011Right now I just installed open ssh because i was told its a great thing to have for remote controlling my machine if I am at work on my windows system. My question is, how on earth do I acess my machine from my windows machine now that its installed? i did sudo apt-get ssh and thats about all so far...
View 5 Replies View RelatedNetworking :: Can't Ping CentOS 5.3 Machine To XP SP2 Windows Machine
Oct 31, 2009I have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
General :: Access Windows Machine Through System Machine?
Aug 3, 2010I'm the Administrating the computers in my office. I want to monitor the user's activity. How can i remote login without distrubing the user's activity on his computer? Any software need to be installed? (I don't want to use Terminal server client).
View 5 Replies View RelatedSoftware :: Rsync Some Data From A Windows Machine To A Machine?
Apr 8, 2010So I am trying to learn a little about Cygwin and rsync. I'd like to rsync some data from a Windows machine to a Linux machine. I've got Cygwin installed but I can't figure out how to tell Cygwin were rsync will be pulling the data from; basically, how to set the directories that I want to be rsnyc'd. I've googled and googled but I can't seem to find the answer to this exact question.
View 4 Replies View RelatedFedora Installation :: Windows Xp On A Fedora Machine?
Oct 12, 2009I have a machine having fedora. I want to install windows in it , but I am scared that I might loose my fedora.
View 4 Replies View RelatedFedora Networking :: Sharing Files And Printers With Windows 7 Machine
Dec 29, 2009I'm having some problems with file and print sharing between my Fedora 12 box and my Win 7 box. trying to access shares on the Win 7 machine results in a "unable to retrieve the shares list" error message. I've been searching Google for a while now with no success.
View 3 Replies View RelatedFedora Installation :: Install F14 Virtual Machine In Windows XP Systems
Mar 8, 2011I am triying install F14 virtual machine in my Windows XP systems. I have downloaded .iso file from fedoraproject.org: [URL] I create my virtual machine and I continue with all steps to install but when installation process finished and I reboot, process installation starts again. Can you tell me how I can create my F14 virtual machine on Windows?
View 8 Replies View RelatedFedora Servers :: Unable To Connect To The Share From Windows Machine
Jun 14, 2011Trying to setup Samba for the first time and am unable to connect to the share from my Windows machine. It is a very basic setup, just trying to setup a single share to use a backup location for my windows files.
I've done the following:
1. Fresh install if fedora 15
2. installed samba
rpm -qa | grep samba
gives the following:
[Code].....
3. Used samba server configuration to setup the share and create the samba users
4. When I tried to connect from my windows machine I get the error that the server is not accessible, you might not have permission to use this network resource or I get the error "windows cannot access server, check spelling and try again.
Both computers can ping each other. I opened samba ports in the linux firewall and tried to connect again: same error Disabled firewall all together and have the same error. Here is the output from the testparm command
[Code].....