Red Hat / Fedora :: XEN And Networking - Interface Comes Up As USB0
Apr 19, 2010
I'm running CentOS 5.4 and have problems with a USB-Ethernet network interface. It works in another, very similar environment but now I added Virtualization when installing the system. The interfaces comes up as usb0 - as usual, and I'm sending and receiving packets (PPPoE) but there seems to be a link missing so that the ppp session can be build. I wondered if this has to do with the Xen virtual environment running which installed a lot of virtual interfaces and bridges, but not for the USB interface.
The problem is that for PPPoE server, the interface must not have an IP address assigned - not an option when creating a new host interface. But even when I do so, the interface seems unlinked somehow. Funny thing, I can monitor the incoming and outgoing packets using Wireshark. I have not (yet) set up a virtual machine/guest system but the default machine is running.
View 1 Replies
ADVERTISEMENT
Jun 1, 2011
I am working on USB Connectivity between android 2.1 Host and Windows Mobiles 6.1 device...When I connect the windows mobile device to android host through USB (in RNDIS Mode), It is appearing as 'eth1' interface instead of 'usb0' interface. Why 'eth1' instead of 'usb0' ? Does behaviour of 'eth1' is same as 'usb0'?
View 8 Replies
View Related
Nov 20, 2010
I have no telephone connection at home, so I use my cellphone to connect to the internet. Network manager reports this interface as a "wired connection", usb0, using the cdc_ether driver.I also have a router at home, so I can connect my netbook to my desktop wirelessly. My desktop computer connects to the router via ethernet connection, and network manager reports it as eth0.
When I had Ubuntu 8.04 installed on my desktop, I could use my phone, via usb0 interface, to connect to the internet at the same time as using the router on eth0. But now I have 10.04 on the computer, and it won't let me use both interfaces at the same time: I have to unconnect the router before I can use usb0.
View 1 Replies
View Related
Jan 3, 2011
I am currently trying to get my server box to recognize my Samsung epic 4g (sprint) which is rooted and has usb tether enabled. It works perfectly and effortlessly on my ubuntu desktop box, but I hook it up to my server box and ifconfig does not find a usb0 device like my desktop does. I am running 10.4.1 on both desk and server box.
View 1 Replies
View Related
Feb 14, 2010
I just had an ATT Uverse RG installed. However my Smoothwall router that previously worked fine with the ADSL SpeedStream is no longer accepting an address assignment DHCP ip address from this new gateway. (3800HGV-B)Any thoughts ideas or experience working with this hardware? ATT only supports Windows and Mac
View 2 Replies
View Related
Jul 18, 2011
I have a ppp0 entry with post-up options like this
mapping ppp0
map none photon-plus motorola
map timeout: 12
[code]...
View 8 Replies
View Related
Apr 23, 2011
I connect my mobile phone to Ubuntu and I get an error message that usb0 is not available. Here is the log:
Code:
--------------- System information ----------------
Platform linux2
[code]...
View 1 Replies
View Related
Apr 23, 2010
We are making an embedded product based on Fedora 10 (this could change, but right now we stick to 10 because it works ok). We have an intel PC board with a build a normal ethernet adapter. Then we have a home build PCI-express card with 4 ethernet adapter build into a Xilinx FPGA (Xilinx Temac) (we got the driver from git.xilinx.com and modified it enough to make it work).
Now, by problem is: How do we control the device names of these ethernet adapters? It would be really nice to have them called eth0, eth1-eth4 in the order mentioned above, such our software always knows which to use for what.
Also: What to we do when the our adapter card is replaced because it is broken? A new card will have new MAC addresses and therefore the adapters will get new names destroying our IP configurations.
View 1 Replies
View Related
Apr 21, 2011
I have web application running on my server and can access this over the GUI.
This morning I can no longer access the gui interface. The activity LED flickers non stop on my nic card. I cannot ping or ssh into the server. However can access it directly from console and system is responsive when doing that. So i think this is a n/w issue... Any thoughts? How can I troubleshoot this?
View 1 Replies
View Related
Jun 20, 2011
I'm just installed Fedora 14 64-bits into a server which come with Multiple network interfaces, I'm found that the naming of each network interface is not in sequences in what I'm thought (e.g: the on board network interfaces name as Eth5 and Eth6, the additional card ethernet port name from Eth0 - Eth1 and etc). How to name the interfaces as what I wish to? What should I install to allow me to rename the interfaces.
View 2 Replies
View Related
Oct 25, 2010
not sure if this is a silly issue or what. I recently upgraded to 10.10. When I insert my usb device, it automounts as /media/usb0, with root privileges. I have to manually unmount it, and afterwards if I select the "mount (drivename)" usb stick from Places it will automount as /media/(devicename) with proper
View 2 Replies
View Related
Apr 21, 2009
running fc10 in a vmware setup Added /etc/sysconfig/network-scripts/ifcfg-eth0:0 to create another interface and all works fine (IPADDR=10.99.56.98). Would you expect this to be available after a reboot, last reboot I had to run ifup eth0:0
View 7 Replies
View Related
Jul 1, 2009
I am applying a virtual interface (eth0:0) which is failing after the system reboots. It actually cause the default interface (eth0) to fail as well, I must manually go in and remove the configuration for the eth:0:0 and restart the network to get it running again. How do I successfully add a Virtual interface to Fedora 11 that will stick when rebooted.
eth0: 192.168.0.200, 255.255.255.0, 192.168.0.1, BROADCAST: 192.168.99.255
eth0:0 192.168.0.98, 255.255.255.0, 192.168.0.1, BROADCAST: 192.168.99.255
View 1 Replies
View Related
Sep 6, 2009
I'm a newbie on Linux and trying to find my feet so please be kind.I have installed vmware on my XP laptop and have installed fedora core 9. Network setting on the VMware is set to bridged. My interface eth0 which is using the wireless does not start on boot. I have to run ifup ifcfg-eth0.The file ifcfg-eth0 had onboot=yes and NM=no, so i changed it so that the NM=yes.However this does not resolve the problem at all. I have put the file back to its original configuration and I have disabled network manager and have had no luck
View 2 Replies
View Related
Jan 31, 2010
I have two network interfaces on my computer but only one of them is connected to an Ethernet cable. Until now on every Fedora release, the activated primary interface has been named as eth0 and everything has always worked well without any problem. Recently I switched to Fedora Core 12 and surprisingly I observed that for the first time, my primary interface has been considered by the system to be eth1 instead of eth0. I tried to replace the content of ifcfg-eth0 by ifcfg-eth1, yet system gave me an error that there was MAC address mismatching. I conserved their MAC addresses in their files and just replaced other connection parameters ( such as IP ADDR, NETWORK, NETMASK, etc.) but it did't work. When I do "server network restart", the command blocks.
As I try to install oracle on this system, regarding the fact that oracle requires static network configuration on the primary network interface, I don't know how to proceed in order to set eth0 as my primary interface (or rather set the current eth1 to eth0 because it is actually eth1 that refers to my activated primary network card).Just one more time, I would like to remark, that with previous versions of the Fedora Core, on the same computer (with the very same two network cards) I never had problem and I had installed oracle on the system with success, having the statically configured eth0 correctly detected by the system.
View 2 Replies
View Related
Oct 29, 2010
I have a set up with a computer that has two network cards and is connected to two networks. Both networks connect to the internet via separate routers that have DHCP enabled. I can set one of the routers up to do port forwarding to the computer without any complications but if I want to do the same on the other router the port forwarding from it doesn't work and I can't reach the system.
I know for a fact that the services are accessible from both networks and both routers can forward ports to other computers in their network. The networks are 10.10.0.1/24 and 172.22.0.1/24. I've tried turning off iptables but that didn't change anything.
Is there any kind of setting that could prevent the interface on the computer to reject traffic using NAT or something?
If I disable the interface on the working network (ifdown eth1) then suddenly eth0 on the other networks starts accepting requests sent to it via the router that does the port forwarding. I do however want to emphasize that services work just fine as long as the requests originate from either of the networks they are on.
View 3 Replies
View Related
Jun 8, 2011
I upgraded from kernel-2.6.38.6-27.fc15.x86_64 to kernel-2.6.38.7-30.fc15.x86_64. After the upgrade I no longer have a wireless interface in Network Management. I have a broadcom BCM4312, booting the previous kernel solves this problem.
View 9 Replies
View Related
Nov 19, 2010
I have installed Fedora 14 about 4 days ago. I have set all the networking parameters like dns path, hostname etc. I have also ensured that I select the check-box for "Enable automatically when system starts" for eth0 interface. But weirdly, whenever I boot my system(or restart), I see that the interface eth0 is disabled. I have to manually enter as root and enable it, each time I boot/reboot my system. Why is this happening? Could you please suggest a way so that I have eth0 interface enabled always when I boot up?Also, my domainname also is not boot-persistent. What steps should I take to ensure that the domainname set once persists across reboots?
View 12 Replies
View Related
Mar 9, 2009
Someone just erased my HWADDR line from /etc/sysconfig/network-scripts/ifcfg-eth0. How can I obtain my original MAC address?
Code:
ifconfig eth0 does not work (it shows the wrong MAC address) since the HWADDR line from the file I mentioned above was erased. Also there is no ifcfg-eth0.bak backup configuration file.
View 2 Replies
View Related
Mar 10, 2009
is it possible to setup a DHCP server using the loopback or a virtual interface? I installed Sun VirtualBox on my fedora system and want to try and kickstart them from within the same box on a virtual network. Is this possible and has anyone done it? I only have a single NIC in the box and it is on my public network.
View 1 Replies
View Related
Apr 18, 2009
Ive been struggling to configure a wireless interface on Fedora 9I need to configure wlan0 command line only with NO display managerIve tried setting up /etc/sysconfig/network-scripts/ifcfg-wlan0 with the right information, doing dhcpbut no ip is retrieved. Checking the dhcp server logs on the DHCP server - no request is received.The link light on the wireless nic is not on either. iwconfig shows it has an Access point associated and an ESSID but im not getting back any IP.There seems to be very little documenta on how to set up wireless nics command line only on Fedora
View 1 Replies
View Related
Jun 10, 2009
On FC10, when system boots up, it would auto detect (from DHCP) and configure eth0.
This does not happen on FC11, but I can manually configure the interface. The entries in /etc/sysconfig/network-scripts/ifcfg-eth0 are identical on both OS releases.
Don't know if this is related, but when I run System->Administration->Bootloader, it fails system-config-boot - missing module kudzu.
View 5 Replies
View Related
Jun 22, 2010
I have a problem with my F13 and wired connections on my Acer TravelMate 2410. When I connect the inet cable it doesn't show it as connected. When I type ifconfig, it shows everything as it should. When I tried to bring up eth0 with ifup eth0, it said that the device is not managed by NetworkManager. I tried to restart nm with service network restart, but it gave this error:
Shutting down loopback interface: Error org.freedesktop.NetworkManagerSettings.InvalidConn ection: ifcfg file ;/etc/sysconfig/network-scripts/ifcfg-lo' unknown
The same error came up for eth0 and Wired_connection_1 (the connection I configured from NM )
When I typed nmcli dev list it gave me:
GENERAL.DEVICE: wlan0
GENERAL.TYPE: 802-11-wireless
GENERAL.DRIVER: ath5k
GENERAL.HWADDR: 00:14:A4:4D:B8:FC
GENERAL.STATE: disconnected
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
WIFI-PROPERTIES.WEP: yes
WIFI-PROPERTIES.WPA: yes
WIFI-PROPERTIES.WPA2: yes
WIFI-PROPERTIES.TKIP: yes
WIFI-PROPERTIES.CCMP: yes
GENERAL.DEVICE: eth0
GENERAL.TYPE: 802-3-ethernet
GENERAL.DRIVER: 8139too
GENERAL.HWADDR: 00:0a:E4:EB:32:E2
GENERAL.STATE: unavailable
CAPABILITIES.CARRIER-DETECT: yes
CAPABILITIES.SPEED: 10 Mb/s
WIRED-PROPERTIES.CARRIER: off
View 2 Replies
View Related
Nov 10, 2010
I have just upgraded my system to Fedora 14. One thing I noticed after running some applications on it is that it is not possible anymore to figure out on what frequency a wireless interface is using. If I set a wireless interface to monitor mode and perform the iwconfig or iwlist command, in the past, I could see the frequency used on the interface, but now, this information is not present anymore. My wireless interfaces are in monitor mode.
Has the frequency information been removed from iwconfig or iwlist commands? If it has, is there another way to report this information?
Here is an output from iwconfig on my system:
View 4 Replies
View Related
Mar 21, 2011
I use chrony on my laptop thinking it would be better for it than ntp because I'm frequently connecting and disconnecting from wireless cafe access points and going in and out of suspend mode. But I've also noticed that if chrony is started before the access point is connected it never syncs to the time servers. I have to manually restart it via the service command after I connect. This doesn't seem right to me, if chrony fails to find a network at start time, doesn't it periodically try again ?
View 1 Replies
View Related
Jan 25, 2010
I have 3 Interfaces for a different LAN's and when I start one interface the another interfaces goes down.How can it's possible?I configure my ethernets as:
Code:
/sbin/ifconfig eth0 172.16.3.108 netmask 255.255.0.0 broadcast 172.0.255.255
/sbin/ifconfig eth1 172.16.3.109 netmask 255.255.0.0 broadcast 172.0.255.255
/sbin/ifconfig eth2 172.16.3.1110 netmask 255.255.0.0 broadcast 172.0.255.255
View 12 Replies
View Related
Feb 18, 2010
I want to do a simple port redirect, i.e. whatever comes trough whatever interface on port AAAA will get redirected to port BBBBI thought that iptables -t nat -I PREROUTING --source 0/0 --destination 0/0 -p tcp --dport AAAA -j REDIRECT --to-ports BBBBhowever it doesn't work, e.g. nc -v -w2 -z localhost AAAA gives:
nc: connect to localhost port AAAA (tcp) failed: Connection refused
while
nc -v -w2 -z localhost BBBB
[code]....
View 10 Replies
View Related
Apr 11, 2011
i am using windows 7 in my laptop and linux is installed on virtualBox but my problem is the screen is showing small in virtualbox is there any way to enalarge the screen to show like windows screen? i did before by using VGA setting but it made problem me i was not able to use GUI interface i meant graphics interface
it was just showing me Command Prompt.
View 8 Replies
View Related
Apr 2, 2009
is it possible to access any application is not in /var/www/html/ via web interface ?
View 5 Replies
View Related
Apr 12, 2010
Who actually uses interface name mapping? Why, and what advantages do you get out of it?
View 1 Replies
View Related
