now the totem movie player is not able to play the video files, not only video files it cannot play anything includeing mp3 songs. here are some screenshots when i tried to open the video files...
i clicked the search option button.but it resulted like this. but earlier totem player was working fine before formatting my system. how to install those missing plugins ?how to make the totem player work with video files ?
I have Fedora 13 installed on my laptop. Whenever I try to play any movie file, through Movie Player, it gives me the following error. Movie Player requirs additional plugins to decode this file
The following plugins are required:
* MPEG-1 Layer 3(MP3) decoder
* XVID MPEG-4 decode
Do you want to search for these now? Once I click on the search button, it searches for the plugins, and after a while prompts with the error message that the plugins couldn't be found. Where will I find the plugins?
I've got a clean Fedora 14 x86 install and whenever I attempt to play a video file, .avi .mkv .mpg doesn't matter, Totem crashes with the following four pop-ups:
An error occurred
pa_stream_writable_size() failed: Connection terminated
An error occurred
Disconnected: Connection terminated
An error occurred
pa_stream_cork() failed: Connection terminated
[Code]...
Have very recently installed OPEN S on my PC. The DVD player( why is it called TOTEM? ) won't work. It asks for some plugins without saying which ones exactly. Have tried to follow some links it suggested but to no avail (me being too bleeding brainless, I presume). Am sure that eventually will find out the solution but for the time being stuck and not able to watch some of Hollywood's greatest masterpieces on my machine.
View 1 Replies View RelatedI am using opensuse 11.2. The totem video player states that I am missing a gstreamer plugin. I checked to see that gst-ffmpeg plugins is loaded, also libdvdcss, libdvdnav, libdvdplay, and libdvdread are also loaded. I would like if someone could please tell me what gstream plugin I'm missing, and where to place it.
View 3 Replies View RelatedI cannot seem to find plugins to play MP3's with totem. When I start it and try to play an MP3 it tells me "You do not have a decoder installed to handle this file. You might need to install the necessary plugins." Where can I find the plugin for Totem?
View 3 Replies View RelatedWhen I try playing DVD's in Media Player/Totem the video is choppy and does not sync with the audio. When I started looking at it in detail I see Totem is using up 95% of the CPU which kind of explains it doesn't it. But it still shouldn't be doing this. I then tried the same DVD's using Gnome Media Player and all is fine, perfect video/audio and normal CPU usage.
View 1 Replies View RelatedI have installed ubuntu9.10 desktop edition.i can't play audio and video becoz i don't have plugins how to install them
View 1 Replies View Relatedubuntu 9.10 64bit
totem movie player 2.28.2
no sound on playing .flv files, the volume control greyout. however vlc can play them without sound problem. videos also works without problem on sound.
when selecting a videos video using totem movie player 2.30.2 in stable, i get: an error occurred? gstreamer encountered a general supporting library error.
View 5 Replies View RelatedI have installed Squeeze with the Gnome desktop and the Totem Movie Player Application. It seems to work ok but it seem there is no way to delete the history. I found one post on the subject with no reply and have read the bug reports and the problem was not mentioned. I tried to find the file containing the history without success.
View 1 Replies View RelatedWhat do I need to play MPG Video. Totem Movie Player 2.26.1 Ubuntu 9.04
View 1 Replies View RelatedI have a lot of .ogv and .mpg files. Most of the .ogv files won't play, and none of the .mpg files will play, in Totem. I installed VLC media player and all the files will play in it. If I click on file properties in Nautilus for the files that won't play, it says "Creating Properties window. You can stop this operating by clicking cancel." But it never actually shows me the file properties.
View 7 Replies View RelatedI downloaded a movie using torrent in ubuntu 10.04. After completion when I played that movie in totem or VLC its showing use windows media player. How can I play the movie in ubuntu-linux.
View 2 Replies View RelatedWhen I try to run totem it crashes when opening a file. I'm using mandriva linux 2009 spring edition.
View 2 Replies View RelatedSince I upgraded to Lucid Lynx, playing videos with the default player do not work properly. I only see the content while moving the window, or in full screen mode, and in both ways, the picture is distorsioned and with strange colors. Playing it with VLC does work properly ONLY IF I change the video output module to something different as default (X11 works, openGL also) but Linux Framebuffer does not.
The question: Is there a way to change the "default" video mode that Totem (or Kaffeine) use?? I have not found anything on the net with this exact problem.
I recently viewed a few .mpg s from the Internet by selecting to open them in movie player. Those videos are listed in the recently opened files list under the 'Movie' menu. I was trying locate these files on my computer since I can still play them by clicking on them in the 'Movie' menu, but I can't figure out where they are. I tried using 'locate' on the command line and it isn't bringing anything up. Can anyone tell me how to find the location of these files?
View 2 Replies View Relatedi have reinstalled my mint 7 and whenever i play downloaded/saved videos from ....., i get a choppy/scratchy audio & video in playback. this was not the case before i reinstalled. videos videos played directly and other dvds played from cdrom and mp3s played from hd are however working fine.
View 4 Replies View RelatedI was experiencing problems in Totem (Movie Player) seeking through some mp3 files. This problem, luckily, was solved (as per this launchpad bug post) by swapping the package:
gstreamer0.10-plugins-bad
for the package:
gstreamer0.10-plugins-bad-multiverse
The only problem being that the package Miro requires:
gstreamer0.10-plugins-bad
So, this makes me have to choose between Totem and Miro. I'd like to use both, fully enabled.
when i try to watch a movie on movie player from the internet i get the requires a Advanced Streaming Format (ASF) demuxer plugin which is not installed. how do i install it?
View 3 Replies View RelatedEvery time I use Movie Pllayer to play DVD movie, it just hang on there and not responding,so I must click the 'Force Quit' button to close it.What should I do to overcome this problem? Is there any other software which can play DVD movie?
View 2 Replies View Relatedhad a computer with fedora 14 cd 32bit gnome installed - worked good got a new disk so installed the dvd version (pretty much all the packages) onto it - this is the problem installation.after installation i added the rpmfusion repositories and installed all codecs. Code: yum install gstreamer-ffmpeg gstreamer-plugins* -x *devel* same as last time although i may have let totem search for some prior to this command)
if you search it wont find anything, if you close it plays perfect,,, but. when loading previews in nautilus it has the loading icon/clock and then just shows the totem icon.also i have realised that it cant play wma giving error "The playback of this movie requires a GStreamer element audioconvert plugin which is not installed." - the rythmbox preview works though.
This never happened with Ubuntu 8.10-9.10, but both my video players, VLC and Movie Player, say they can't find the wma codec (actually it says wmas, and this is referring to videos not audio) and says that this can't be put right, even though at the same time these players have begun to play the video correctly. I've got all the updates and the Restricted Extras, etc. Everything seems to be working. This is on an Acer Aspire One, dual booting with W7, installed from USB stick. I don't want to have to close the notification box each time.
View 1 Replies View RelatedThis never happened with Ubuntu 8.10-9.10, but both my video players, VLC and Movie Player, say they can't find the wma codec (actually it says wmas, and this is referring to videos not audio) and says that this can't be put right, even though at the same time these players have begun to play the video correctly.
I've got all the updates and the Restricted Extras, etc. Everything seems to be working. This is on an Acer Aspire One, dual booting with W7, installed from USB stick.
i want to watch a movie in totem but it asks for a plugin MPEG layer-3 codec how can i install this codec preciate
View 4 Replies View RelatedAnyone know a working movie player? I can't use Movie Player to play my movie because it's talking about plugin BS. Now I try loading the disc with VLC media Player and the crap just closes out.
View 6 Replies View RelatedWhen I am clicking on Downloads or any other menu item in "Places" menu its opening the totem player. Whats the problem ?
View 2 Replies View RelatedI can't seem to get any DVD movies to work in movie player. Is there anything I can do to troubleshoot?
View 2 Replies View RelatedI'm trying to watch a DVD video using Movie Player, but nothing happens. It asked for a MPEG-2 decoder but then said Gstream already had the decoder. But to be sure I hunted down some rpm files with a free MPEG-2 decoder and installed them. Nothing happened. Before that, Movie Player asked for an Advanced Stream Format Demuxer. Then it told me it was already installed. I tried to uninstall Gstream. Maybe it was installed badly for reasons unknown, but the uninstaller warned that it would take 50 files with it.
I got the impression it was daring me to uninstall Gstream, so I chickened out. But I am upset now. This problem has wasted half of my Saturday day off and it is still not solved. I forgot to say I had also installed libdvdcss, in desperation. Nothing happened. This computer does display DVD videos with Movie Player using a different distro. I'm not surprised Fedora has problems. But you figure by 2011, watching a DVD video should be no problem by now in any distribution.
Just picked up a SanDisk Sansa mp3 player. I used the package manager to DL a FAT16 sorter, but that didn't seem to work. Does anyone know of a package I might use or how to get this to work. Also, is there a script anyone has written to add all of the plugins and multimedia stuff on high use or the regular.
View 2 Replies View Related