I am trying to install RHEL5.5 server on Dell Optiplex 360. When its reached at "checking dependencies in packages selected for Installation" its hang. What should I do, I checked cables hardware etc... every thing looks ok.
View 7 RepliesTrying to install Ubuntu 10.10 Server via a usb flash drive. Can't use a cd-rom as the server doesn't have a cd-drive! lol! It boots up and then hangs at the loading stage where the ubuntu symbol is displayed.
View 1 Replies View RelatedBut when i try the Ubuntu Server Edition, using the same method of burning the iso file i downloaded from ubuntu homepage into a cd, and when i reboot my pc and the screen display the following:ISOLINUX 3.63 Debian 2008-07-15 Copyright (c) 1944-2008 H. Peter Anvin
Loading...Initializing gfx codeand it hang there.Do anyone know what happened? I have verified the file i download and the disc i burnt through MD5SUM.
My Laptop spec:
Intel(R) Pentium(R) M Processor1.86GHZ
1GB Ram, 80Gb Hardisk
OS1: Microsoft XP Home edition SP2
OS2: Ubuntu Desktop Edition
Can we do kickstart installation of linux on Vmware Workstation.
View 1 Replies View RelatedMy server OS CentOS release 5.4 (Final). Using Plesk panel 9.2..Server getting down frequently, how to check the log on server. how to find out the reason.
View 9 Replies View RelatedI have Cent OS 5.1
I also have http://phpsysinfo.sourceforge.net/
I have asterisk running .
Now when I look at System Information ,
I see that "Physical Memory" keep increasing and at one point it reaches 96%. Then my sever get hang and then I have to restart it.
I have 4 GB RAM.
Processors 2
Model Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz
CPU Speed 2.53 GHz
Cache Size 3.00 MB
System Bogomips 10135.71
Kernel Version 2.6.18-53.el5 (SMP)
Distro Name CentOS release 5 (Final)
Load Averages 0.27 0.35 0.31
What could be the reason ?
I have 2 ethernet cards but when I look at the Network configuration in "Hardware Tab" I have another acx wireless network. How to delete that because In my system Idon't have wireless card..probably installed before but want delete it now.
[code]...
then windows can ping server and resolve ip address and browsing Internet but can't ping [URL]... result is Request time out. ICMP already enabled in iptables.
We are using squid proxy server in Linux and server is getting hang often, during this time when see the log file it will show like below
Jul 23 11:52:26 Linux-GW avahi-daemon[2028]: Invalid response packet from host 192.168.1.154.
Jul 23 11:54:55 Linux-GW avahi-daemon[2028]: Invalid response packet from host
[code]...
Iam handling mail server in redhat.MTA using is qmail.since last 1 month it get overload and get hang...since in morning its time for user to loging into mail through web interface.though suddenly login in to mail it get overload and server got hang.we need to restart the server...did not get time to kill https also some time MP port work to save us...still didnot get command to overcome the over load in server...
View 9 Replies View RelatedHow do I make a server wait on shutdown for a set amount of time?I tried making a service that just does Code: sleep 7m and made it first priority on shutdown but it seems to ignore itI'm pretty sure it runs... I'm currently testing that to make sure
View 4 Replies View RelatedI have a newly built Redhat 5.5 box. When connecting over VPN and executing either "ls -al" or "df -h", the command prompt hangs without returning any output. Have got same result with TeraTerm and Putty clients. However, other commands run fine. Also,local users are able to run "ls -al" or "df -h" successfully.Storage is local disk. Any idea what could be mis-configured.
View 1 Replies View Relatedfrist i want to thank all who worked on this website i was install squid and other service in my office network server and install the same services with same configration on biger network about 150 machines every thing well on office network but the other network have problem squid hang and stoped serve any request and squidclient command return "alarm clock " message after many time but the service still run at port 3128 and status is started when i run /etc/init.d/squid reload its run again sometime and hang again squid log file have not any problem on it i install my server on gentoo with flags
Code:
net-proxy/squid-3.0.19 USE="zero-penalty-hit -caps -epoll* -icap-client (-ipf-transparent) -kerberos -kqueue -ldap -logrotate* -mysql -nis -pam (-pf-transparent) -postgres -radius -samba -sasl (-selinux) -snmp -sqlite -ssl"
my squid.conf
[code]....
When i checked my server in today morning,i found server was hang.
How can i find whether it is hang or not?
Where can i find the log from which i can find the exact time?
I'm developing simple transaction switch using java socket programming and running operating system RHEL5.4 . Now it is completely done and working fine. So I have written the simple shell script to run it on background.
[Code]...
how can we achive more than 8TB size for one LUN.?I am getting following error..
[root@storage ~]# mke2fs -j /dev/VG01/data
mke2fs 1.39 (29-May-2006)
mke2fs: Filesystem too large. No more than 2**31-1 blocks
(8TB using a blocksize of 4k) are currently supported.
I want to implement CBQ in my RHEL5 server so that i can manage my BW.
View 4 Replies View RelatedI have rhel5 running ok and windows7 running ok, and currently access both via grub (both os are on separate disks) I want to be able to switch between both without rebooting. xen is installed and working but I cannot configure windows to run as a guest as xen wants an iso or img file.
View 1 Replies View Relatedi wnt to know how to configure nat server in rhel 5 i have net on eth0 so hw can i share net on my lan through nat server
View 3 Replies View RelatedI am configuring apche on rhel5, I got default page successfully, and virtual page too, when I keep only one file index.html in virtual folder it goes well, that file opens correctly, but when I keep other html files except index.html server shows default page again.
View 2 Replies View Relatedhow to configure vsftp in my rhel5 server.
View 2 Replies View RelatedI installed RHEL 5.5 with Postfix & openldap. POSTFIX version-2.3.3 openldap-server-2.3.43-12.el5 How to combine ldap with postfix for authentication? How to compile postfix with LDAP and where is the source
View 1 Replies View RelatedI wonder if someone can shade alight on this problem,I have active subscription for rhel4 ES and trying to do a fresh install of rhel5,I was able to download rhel5.3 DVD image from redhat site,burnt it to a DVD but is not booting,i have so far tried on 2 different DVDs but both have failed. I have even downloaded and burnt 1 CD ISO image burnt it still failed.BIOS level is set to cd device first so no problem there,it works!
View 5 Replies View RelatedI'm trying to get RHEL5.3 booting on an IBM Blade off a SAN disk, but it refuses.Our storage is presented on LUN 1 as due to the IBM XIV SAN, we cannot use LUN 0 when presenting volumes. We believe that when the installer tries to configure the boot LUN, it expects to see it on LUN 0 but we can't use that. This leads to a problem where after installed Red Hat, it asks me to remove the CD and reboot, but doesn't load anything other than a cursor blinking at me on the monitor.I currently can't change the LUN ID on the SAN, so I've been trying to amend things to get it to work with no joy.
View 3 Replies View Relatedwhat is the process of updating rhel5.1 to rhel6
is there anything which need to done before creating yum repositry and simplly running yum update ?
School with linux running on students' laptops, connecting via wlan to a Debian NFS and LDAP server. Every student logs on his/her profile residing on the NFS server.The clients are set up with autofs. Earlier, I had set up the wireless network in /etc/network/interfaces, but this time I decided to configure network manager so as to bring up both wireless and wired network before logon. This setup has been working on for the last fire or five years with only minor changes. Also worked with Karmic Koala, but still with the interfaces file instead of networkmanager. The Vostro is also new here, we've previously used mostly Dell Latitude D505s.
So here is what works:
1: Clients can log on to LDAP and NFS servers both wired and wirelessly. Everything is smooth.
2: While on LAN, shutdown and restart works flawlessly (and quick as a breeze, I'm really impressed by startup/restart/shutdown times, under 25 secs!).
3: Shutdown and restart also works wirelessly when doing it either from a local account or from the GDM chooser.
What doesn't work, however, is shutting down or restarting directly from a networked account connected while only being connected over the wireless network. This is what's being displayed on the terminal after it has tried tho shut down for a while:
Code:
The system is going down for halt NOW!
acpid: exiting
init: cron main process (1011) killed by TERM signal.
init: tty1 main process (1365) killed by TERM signal.
[code]...
If I try ctrl-alt-del at this stage, it says:
"init: rc main process (3030) killed by TERM signal"
"Checking for running unattended-upgrades: "
And then it will hang again, until I hold the powerbutton for some seconds. The unattended-upgrades part is what seems to be the culprit. I suspect it is about the wireless network not being connected any longer or something like that, but I'm not sure about how to go about debugging shutdown scripts here. I'd be grateful for pointers. I will try and see how it goes with the old interfaces file setup, but I'd rather make nm work.
The DNS server configuration for CentOS and RHEL5 and the entries for the clients in its configuration files...
View 8 Replies View RelatedI am studying RHEL myself, not clear with following topics How to configure DNS slave server in RHEL 5 Whether named.rfc1912.zones file entry can be included in named.conf itslef,if not What is following entry means inside named.conf file
zone "." in{
type hint;
file "root.servers";
[code]...
I want to configure a PXE Install Server with RHEL5u3 64bit.
View 1 Replies View RelatedHow to check server usage (process and memory) for last 4months in RHEL5
View 3 Replies View RelatedMy RHEL5 server is sync with NTP server. But we dont want to follow Day light saving. Is there any option to disable it. Like in windows you can uncheck the option if you dont want to follow day light saving.?
View 3 Replies View Related