Red Hat / Fedora :: How To Configure Clients On LAN To Point To Dns?
Jul 6, 2010I have setup a DNS server in a LAN,How should I configure the clients on the LAN to point to my dns??
View 2 Replies
ADVERTISEMENT
Fedora :: How To Configure Process To Change Name Of Mount Point
Jun 19, 2010I have set up an encrypted ext4 partition on a new external USB HDD. When I plug it in, some sequence of a daemons and scripts cheerfully puts up a dialog to ask me for my pass phrase and then creates a mount point and mounts the drive in /media. I'd like to know how to configure this process to change the name of the mount point (right now it's an unwieldy hex string), it's permissions and ownership. I'm sure this is straightforward, but I just don't what the relevant programs and files are.
View 2 Replies View RelatedFedora Servers :: Configure Evolution-mail Clients Through SQUID Proxy?
Jul 27, 2011I have configured router(192.168.1.2) to serve only one machine with IP - '192.168.1.6' and set up SQUID proxy on '192.168.1.6'. I have defined some rules(ACL) regarding connections to internet on SQUID proxy.
I changed the Gateway of rest of machine (192.168.1.60 - 192.168.1.69) from '192.168.1.2' to '192.168.1.6'.
The policies which I defined in SQUID is working properly but 'Linux Evolution mail' client is not fetching mails.
Is I have to do any other settings on 'Linux System' or 'Evolution mail client'.
Ubuntu :: Set NTP To Point To An External Server, But My Thin Clients Don't Get That Setting For Some Reason?
Apr 8, 2011I'm running several Ubuntu servers with LTSP thin clients in our classrooms. It's been a royal pain trying to get them to synchronize time properly.Currently I'm looking at 7 client's login screen and each one has different time. It's frustrating and I've done all the reading I could in regard to NTP and LTSP with time, etc.I'm trying to even set NTP to point to an external server, but my thin clients don't get that setting for some reason. They still pick whatever time they want to present to the end user. Once the user logs in, the time seems to be fine. It's just at the login screen.Since I'm no expert on NTP I figured I'd ask to see what users here thought.
EDIT - I was told that the GUI version of Ubuntu handles NTP at System-Administration-TimeAndDate. Is this true? I was told my /etc/ntp.conf file is empty because that file is only used in the server edition of Ubuntu.
Server :: Configure YUM Management For LAN Clients?
Apr 12, 2011I have installed my CentOS 5.4 in my system and i want create self repository for my clients. I trying to configure.
View 1 Replies View RelatedServer :: Configure Vpn For Windows Clients
Apr 27, 2010Please help me to configure vpn in linux for windows clients & also road worriers.
View 2 Replies View RelatedUbuntu Installation :: How To Configure MBR To Point To GRUB
Sep 1, 2011I am interested in running Ubuntu side-by-side with my windows 7. It appears that the Ubuntu 11.04 installer does most of the work for me as partitioning according to:[URL] but the only thing it says that I would be having to do myself is changing the code on my MBR to point to the GRUB2. I am not afraid of command prompts, but would like some hand holding as I don't wwant to guess and check when dealing with MBR.
1. Is there any way to share documents between my Ubuntu partition and Windows partition? Or some way to make it so documents and non OS specific files are accessible by both OSs?
2. Is it recommended to let Ubuntu do the partitioning for me? Or is there something to be gained by partitioning myself?
Server :: Configure Dns To Point Correct Ip To Website
Nov 7, 2010i have made a website and i want to use it in my lan.it is working with ip address but i want to use name convention.dns server is working correctly.my server ip is 192.168.0.254 and sample website is [URL] computers in my lan can open it using http://192.168.0.254 but not by [URL] what things i need to edit in named.conf file and in forward zone and reverse zone files?
View 3 Replies View RelatedGeneral :: Configure Ourlook Clients Imap Settings With Sendmail Server?
Dec 15, 2009I want to use imap account settings in MS outlook 2003/2007 with backup end Sendmail server. When i configure imap settings in MS outlook 2007 it shows mails are coming from Sendmail server , but another local Personal folder attched with outlook client. I have changed my settings so that every send items mail are coming under imap send-items folder ,but that extra folder stilli in place. I do not see any option how to remove this extra folder from my PST list.? As this never comes with if we are using MS Exchange.. Is there any way i can change my local delivery bydefault with IMAP folder only and save my Contact in IMAP Folder?
View 1 Replies View RelatedServer :: Configure Squid Proxy To Point To A Central Policy Web?
Nov 10, 2010Is there a way to configure Squid to get the filtering policy from a central policy on a web server.
like squid pointing to [url]
Server :: Configure System Vpn Server For Windows Clients And Roadwarriors Connection?
Apr 26, 2010How to configure linux vpn server for windows clients & roadwarriors connection?
View 4 Replies View RelatedUbuntu Networking :: Point To Point Tunneling Server Connection Errors?
Mar 28, 2011I recently installed the pptpd server on my system and set it up according to these instructions:HTML Code[URL]t=132029However after setting everything up on attempting to connect to it from a windows machine (windows 7 home premium to be specific) it gives me two errors which are 720 and 800...It reaches "registering your computer on the network" fine and then gives 720 on the first attempt to connect and then 800 on the second attempt to connect...and then on the third 720 and 4th 800 and so on..My system running the server's I.P is 192.168.1.70My system running the windows OS trying to connects I.P is: 192.168.1.66
View 2 Replies View RelatedNetworking :: Policy Routing Using Two Point-to-point Links?
Aug 27, 2009This one has been driving me nuts for some days now:My Gentoo box which is acting as an internet gateway has two point-to-point interfaces, ppp0 (PPPoE to my ISP) and ppp1 (PPTP VPN link to IPREDator). Packets from my local network are just routed through ppp0 and now the fun part starts: I want to MARK (netfilter...) all packets originating from one specific user on that box in order to use another routing table that will contain a default route via the ppp1 interface.Marking seems to work fine as does the second routing table. But quite mysteriously (at least for me), the packets sent out on ppp1 contain the wrong source IP address, namely the address associated with ppp0.So here is what ifconfig and friends tell me:Network interfaces:
Code:
# ifconfig ppp0
ppp0 Protokoll:Punkt-zu-Punkt Verbindung
[code]...
Ubuntu Networking :: Point To Point (ad-hoc) SSH Over USB Or Ethernet?
Jun 3, 2010I was wondering if there is any way to SSH from one computer to another and completely bypass a router or any other network infrastructure. The reason I ask is because my robot ( same one in this post ) often needs to change which wireless network it automatically connects to, however it is getting annoying to have to drag out a monitor and plug it in along with a keyboard and mouse every time this needs to happen. Instead I'd much rather just plug my laptop into the other computer, SSH in and change the network myself.
So I thought I would ask you kind people if this is possible. The robot's computer has unused ethernet and USB ports, and I'd like to use those if at all possible (and with linux, anything is possible! -- sorta). I thought about doing something with ad-hoc, but this would limit my range (in infrastructure mode I can control the thing anywhere there is internet), and is to be avoided.
Fedora Networking :: Setup A VPN Between 2 Clients?
Mar 27, 2009I need to set up a VPN between 2 clients but don't have the foggiest idea where to start. I have searched the internet in vain, I have yet to discover the steps I need to take.
View 3 Replies View RelatedFedora Servers :: CUPS And LPD Clients - Cannot Add Printer?
May 12, 2009I'm working on CUPS server here now, I am new to the whole Fedora area, I'm starting to like it, tackling one service after the other. I have cups, which I don't recall installing but was there guess its a default. So I added a printer on my server, that was on a 10.0.1.1 block, added it as lpd://10.0.1.1/lab3printer. Ok that worked and printed from my server, but my problem is when other machines try to add the printer. I continue getting this problem
Alberto "recoverable: Network host '10.0.11.25' is busy; will retry in 30 seconds..."
On the computer it was added as printer lpd://10.0.11.25/alberto because my server has that IP and printer well named it alberto. I followed what this said with the xined.d [URL].
Fedora Networking :: F10 As Server And Clients Are WinXP
Jun 21, 2009I'm setting up a network for a school. The network has 11 client computers (windows xp) and a server (fedora 10) All I need to do is have a share for all the children to use. (this I did by adding each client to the workgroup specified on samba then I just map the drive). The issue turns out to be that I have over 300 users. The users don't always use the same computer therefore I need the users to be registered on all 11 clients. How can I do this? I have been searching and I've not gotten anywhere. How can I add the computers to a domain instead of a workgroup? What can I use?
View 1 Replies View RelatedFedora Servers :: Samba Will Not Allow Any Clients To Connect ?
May 17, 2010I've done this before, maybe ten times. This time is different. I don't know why, but Samba will not allow any clients to connect.
I've done:
- installed samba
- setup the samba shares
- have a samba user/passwd
- authentication = users
- punched in the samba stuff for firewall
- workgroup is set right
What the heck? I cannot get any client to connect. Not even the server machine can connect to itself through a client. What am I missing here???
Just for the record, I'm trying to connect to \SERVER:
Code:
Code:
I removed a whole lot of comment lines in the config file.
Fedora :: Twitter-clients Not Updating Timeline?
Sep 6, 2010I've grown very fond of Gwibber, since the introduction of F13 as a Twitter-client. However since 5 daysGwibber is no longer updating the timeline. As the problem maintained, I also installed Pino and Twitux.But they seem to have the same problem. I've tried to uninstall and re-install them, but that didn't solve my problem.
View 8 Replies View RelatedFedora Servers :: Serving Windows Thin Clients
Jan 19, 2009My brother and I want to set up a server off of which we would provide the processing power for several thin clients. Is it possible to serve the thin clients with images of Windows XP to run?
View 3 Replies View RelatedFedora Servers :: Use Dhcpd To Assign Vpn Clients Their IP And Configuration?
Jan 24, 2009Is there a way to use dhcpd to assign vpn clients their IP and configuration?
I'd like to have dhcpd listen on br0 (already set as 10.0.0.1) so that devices conecting through eth1 and tap0 (should I be using tun?) will get the same address pool.
Fedora Servers :: Server And Clients (NFS And NIS) Are In Continuous Attack Via Ssh?
Aug 25, 2009My server and clients (NFS and NIS) are in continuous attack via ssh. Somebody is trying to guess password and login, and making port 22 busy.What are different ways to stop this attack?I am thinking to block this ip in iptable but I have no good idea because I have not done this before. Any special consideration do I have to take while doing this thing? How is it done and which file does it modify?
View 14 Replies View RelatedFedora Networking :: Divide Equal Bandwidth Between / Among Clients
Mar 3, 2010how to Divide Equal Bandwidth between / Among Network Clients? e.g if there is total bandwidth = 10Mbps and only 5 clients are online then bandwidth should be divided evenly i.e each client to 2Mbps and if 20 clients are online then 0.5Mbps to each client automatically. [in windows this can be done by bandwidthcontroller software now how it can be done in linux]
View 3 Replies View RelatedFedora Servers :: Create A Pxe Boot For Windows Clients?
Jul 23, 2010is it possible to create a pxe boot server on fedora for windows clients?
View 2 Replies View RelatedFedora Networking :: View Local Webserver From Xp Clients By Not Using Ip?
Jul 26, 2010I'm some sort of creating an Internal webserver or Intranet for short locally. My local webserver ip address is 192.168.0.1 and when im trying to view this on my xp clients i will type it in the url 192.168.0.1. What im trying to do is view my webserver instead of typing ipaddress I'll type hmij.edu.ph for example and trying to resolve it locally through local dns resolution.. so every time i type for example. my webserver name hmij.edu.ph i want it to redirect it to my local webserver w/out going to the internet first.. I already setup dnsmasq for dhcp and dnsclient resolution. is there any better way on how i can achieved this?
View 5 Replies View RelatedFedora Servers :: Process Of Updating All The Clients Nodes To The Same OS?
Jun 22, 2011I'm having a problem with NFS. I'm trying to mount /home, which is on the server, to the client nodes. The server is currently running FC14 (64 bit) and I'm in the process of updating all the clients nodes to the same OS. Currently, all the client nodes are running FC8 (32 bit) and are capable of mounting /home on the server. However, the one client node that I have updated to FC14 is having problems mounting /home. I can ssh to the node with no problem however I get the following message:
Could not chdir to home directory /home/myuserid: Permission denied. Now, if I excute the following command: "sudo mount -a" I get no errors and now I can see my home directory.
Red Hat / Fedora :: Clients Won't Boot From System DHCP / Resolve This?
Dec 18, 2010I have a windows and a linux box running DHCP respectively. The problem is whenever my client system boots up, it fetches the dynamic IP from the windows box. What should I do in order for my Linux box to provide dynamic IP's to clients? Both servers are in a single network. connected via switch.
View 1 Replies View RelatedRed Hat / Fedora :: NFS Mount Point On Two Servers?
Jun 1, 2010I am trying to mount /NFS as nfs mountpoint on two servers ( A & B ) having OS OEL 5. After mounting the nfs filesystem, both of them behave normally for around 10 mins and after that the NFS file handle become stale and the mountpoints dont respond. While executing df -kh, the output hang out and the /var/log/messages show the following message:
May 27 15:48:56 earth mountd[3078]: Cannot export /NFS, possibly unsupported filesystem or fsid= required
May 28 04:04:20 earth kernel: nfs: server nas not responding, still trying
May 28 10:11:51 earth kernel: nfs: server nas not responding, still trying
The fstab entries for /NFS mountpoint on both servers is :
nas:/NFS /NFS nfs rw,bg,hard,nointr,tcp,nfsvers=3,timeo=600,rsize=32 768,wsize=32768,acti
meo=0 1 2
/etc/export entries on both server is :
/NFS *(rw,sync,no_wdelay,insecure_locks,no_root_squash)
Fedora :: Using Fedora As Wireless Access Point?
Jun 10, 2009I have a Pentium 3 system running Fedora 10 (but will be upgraded to 11 this weekend) acting as the router for my 10.x.x.x network to my DSL modem using iptables for a couple of windows computers in my house. the network is all copper ethernet, but my girlfriend's notebook has wireless on it. I put a Linksys wireless PCI card into the fedora server, and it works with b43-fwcutter-011 and lsmod shows b43 loaded. iwconfig lists wlan0. anyway, what I need to know is if anyone has any instructions on how to make the server also be a wireless access point w/ WPA2 encryption for my girlfriend's notebook so that she doesn't have to use her ethernet cable anymore. I've done some google searching and haven't came across anything that was of much help.I ran system-config-network but it didn't seem to have a section on setting up wlan0 to be an access point.
View 2 Replies View RelatedFedora :: Unable To Find Matching CELT Codecs With Other Clients?
Jan 26, 2011Each time I connect to a Mumble server, this appears:Quote: Unable to find matching CELT codecs with other clients. You will not be able to talk to all users. Apparently that is the cause for not being able to hold a conversation on mumble. Nobody can hear me, though I can't specify if I can hear others at the moment. Some googling has led me to this:
Gentoo Bug #293300
media-sound/mumble-1.2.0_beta1 tries to load media-libs/celt-0.7.0 as
"libcelt.so.0.7.0", but the actually installed library is named
"libcelt.so.0.0.0". Thus CELT support in Mumble is supposedly missing, but can
be restored by symlinking libcelt.so.0.7.0 to libcelt.so.0.0.0.
[Code]...