Red Hat / Fedora :: Can't Get Working Driver For Radeon HD5870 On CentOS
Oct 27, 2010
I installed CentOS 5.5 64-bit version. After (and during) the installation my graphic card couldn't be recognized. The resolution was way below the native (1920*1080), windows moved pretty slowly and scrolling was even slower.I updated the system - didn't solve the problem. After the update I tried to select the 'radeon' driver from Administration->Display, but after the restart the X server crashed and recovered to the previous configuration (vesa). I tried to install the official AMD Catalyst driver, and after the restart the native resolution was detected, but the interface begun to work even slower (very difficult to move windows and scroll text). The Catalyst control panel couldn't be opened as well.
View 4 Replies
ADVERTISEMENT
Oct 27, 2010
I installed CentOS 5.5 64-bit version. After (and during) the installation my graphic card couldn't be recognized. The resolution was way below the native (1920*1080), windows moved pretty slowly and scrolling was even slower.
I updated the system - didn't solve the problem. After the update I tried to select the 'radeon' driver from Administration->Display, but after the restart the X server crashed and recovered to the previous configuration (vesa). I tried to install the official AMD Catalyst driver, and after the restart the native resolution was detected, but the interface begun to work even slower (very difficult to move windows and scroll text). The Catalyst control panel couldn't be opened as well.
View 8 Replies
View Related
May 11, 2010
I consider to buy following laptop: Asus G73JH-Tz002 Intel Core i7 i7-720QM 8GB 1TB 17,3'' Blu-ray Combo HD5870 NoOS But for me mandatory requirement is that this fully supports Linux. Therefore I am a little bit concerned about graphic card: ATI Radeon HD5870
I prefer nVidia due to 100% linux support, but cannot find a similar model (CPU I7 4 core, 8GB RAM, 1TB 7200 hard disk) I read that ATI is now included in kernel, but I am not sure it this model is fully supported (all my PC's uses nVidia and I had never any issue with it) Does anybody have exepience with 'ATI Radeon HD5870' on Linux?
View 5 Replies
View Related
May 5, 2011
coming back to linux after a few years away and I'm trying to get it set up on my Asus G73JH laptop. Problem is the closed-source drivers aren't playing nice. I can get it to start with the "radeon" driver but when I try to use fglrx, either through a manual xorg.conf change or aticonfig, I get a black screen (or a couple times a white blob moving across the screen) and then the system hangs. The biggest problem with this is I can't access the output from the X server and nothing is being written to the log files (probably because I have to hard-reboot). I've googled and read just about everything I can and I'm pretty much lost for ideas now. I'm not too good with troubleshooting Linux since it's been a while but there are a couple things that would be really helpful to me: a way to save whatever X puts out before the system hangs and a comparison from someone who plays decently graphics-intensive games between fglrx and the open source driver because I don't mind using the open source drivers as long as performance is comparable. Any extra information I can post I will as requested but I think being able to review the X output is a good place to start!
View 7 Replies
View Related
Nov 21, 2010
i upgraded my System from Fedora 11 to Fedora 13. My graphics driver crashed (graphics-card: radeon hd-4-series) and i couldn't even start. I managed to reset the driver and now Fedora ist booting again, but it isn't working properly:
Code:
And every time is boot, i get this boot-message:
Code:
View 12 Replies
View Related
Nov 12, 2009
Ati 11.2 repo isn't accessable. Ati catalyst 9.3 dont want to install.
View 9 Replies
View Related
Aug 4, 2011
My /etc/X11/xorg.conf:
Section "Device"
Identifier "HD4850"
Driver "radeon"
Endsection
I have wheezy up to date and the xserver-xorg-video-radeon package is at version 6.14.2-1. I am using the linux-image-2.6.39-2-amd64 package as well for the kernel. When I boot, it stays on the tty1 console and I can't start gdm3 manually (it also doesn't start automatically).
View 1 Replies
View Related
Apr 7, 2010
Can't get it to work. there is a driver at the amd website that i installed and it made my screen go #@$%@@#@@@!!!!##!#!$$#fV><$%$54
View 1 Replies
View Related
Jun 5, 2010
I have acer laptop with ATI Mobility Radeon HD 5470 graphics card. I have downloaded ATI Radeon 5xxx driver from ati official site. When I ran it using the command below, it gives me the following error
command:
Error:
Removing temporary directory: fglrx-install.OiFpw4
View 14 Replies
View Related
Jul 19, 2010
Does anyone know if i can get gnome/vlc running with this card and the radeon driver supplied with f13?
Because my 4890, which worked well with f13, died and now i need an new card to play games on windows. But i would like to use f13 also.
View 2 Replies
View Related
Apr 25, 2011
I`m using a N5010 dell laptop with an Ati Radeon mobility 5650, I tried to install the ati drivers on F14 which caused a black login screen and there is no way to open the console and do anything. On top of that I`m using Ubuntus Grub2 so I`m practically stuck.
View 7 Replies
View Related
Jul 28, 2011
Yesterday I updated my F15 x86_64 system from kernel 2.6.38.6-27 to 2.6.38.8-35. After the reboot, my triple-head system complained of not having enough CRTCs and only 2 screens worked. Other components were also updated, including some X11 components, however selecting a fallback kernel at the grub prompt indicates this follows the kernel (fall back to old kernel has all 3 monitors working). xrandr --verbose on the 2.6.38.6-27 kernel shows each of the 3 monitors assigned to separate CRTC entries, with CRTCs 0 thru 5 available.
Same command on the new 2.6.38.8-35 system only shows CRTCs 0 & 1 available. My system using an XFX Radeon HD5450 card, with 3 interfaces: HDMI, DVI, VGA. The default Fedora open source "radeon" driver allows all 3 interfaces to be usable. However, with the new kernel, the loss of several CRTCs prevents the 3rd monitor from working.What are the thoughts from the community? I've searched various forums here and haven't seen similar symptoms reported. I'm looking for any direction/experience/thingsToTry from others before trying to open a bug report. (Attempts to use the Catalyst driver several months ago resulted in only 2 of the 3 connected monitors working.
View 2 Replies
View Related
Dec 23, 2009
I have been trying to install the FGLRX driver for a Radeon HD 4850. According to this page and others on the web, it says that Xorg 7.5 isn't supported by the driver. I was just wondering is it possible to install Xorg 7.4 on Fedora 12, if not what release of Fedora should I use (i.e does Fedora 11 support Xorg 7.4?)
View 2 Replies
View Related
Jun 14, 2011
The display card of my notebook is ATI rd 6370m ,the OS is fedora14. After I installed the driver download from ATI web site, it says that my computer can only run 2D can't run 3D. I want to know if some one used the same card with me in fedora14 has run 3D sussesfully? After the installlation I run "#aticonfig" it says "can't find the adaper".
View 2 Replies
View Related
Apr 4, 2010
I replaced an ATI Radeon 9550 with a Radeon X1300/X1550, in hopes of better performance.
My System: P4@3GHz, 1.5Gb RAM, Fedora 12, kernel 2.6.32.10-90.fc12.
Faults: Screen refresh is extremely low. Glxgears outputs 25 FPS. Dragging windows around is sometimes really slow.
What I did so far, in hope of fixing it:
1. Installed 'system-config-display', for providing an xorg.conf
2. Did: yum --enablerepo=rawhide update mesa-dri-drivers-experimental mesa*, fixing this, but to no avail...
I cannot find any errors in the log...I don't know what to do...
I am posting my Xorg.conf, Xorg.0.log and Glxinfo through links to pastebin.com
POST UPDATE:
When running GlxGears, I get a bit of motion, and then the gears freeze for 1 second. And this goes on and on. But...if I move the mouse around, I get 1100FPS!
Now I messed a bit with xorg.conf and the "SWCursor" Option, but the above happens when this option is on "true". On "false" there is no 1100FPS, only the freezing loop...
View 1 Replies
View Related
Nov 22, 2009
I have the graphic card: ATI Technologies Inc RS482 [Radeon Xpress 200M] and I want to set the driver radeon because when start the ubuntu 9.10 on live cd it's use this driver. Now load the radeonfb but when set on xorg the driver "radeon" while reboot the machine not work. When start gdm the screen becomes black and I need power off and change xorg.
View 1 Replies
View Related
Jul 16, 2010
Im having problems making my wireless card "Broadcom 4312" work on centos 5.4 X64 , i have installed and built the driver from their official site and inserted its module successfully, but whenever i try to avtivate the interface "called eth1" i get the following
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth1 ; Invalid argument.
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth1 ; Invalid argument.
View 2 Replies
View Related
Jan 28, 2010
I'm running Mint Helena.The problem is that i can'd find a driver for my ti radeon x1050 card. I've tried the mesa driver and the other things similar to it but with no result.
View 1 Replies
View Related
Jan 31, 2011
I'd installed Puppy and was very happy with the performance on my laptop, but I decided to switch to Debian because of the ap-get feature. I decided to go with JWM instead of one of the default desktop environments, but now I'm having to configure everything manually, and I'm pretty lost. So far, I've got X and JWM installed (though no graphical login, and have to startx manually).
Priority one is to update the video driver and get the best performance possible. I have an ATI Mobility Radeon 7500. I know the fglrx driver doesn't work with this card, but I don't know which package to install. When I type "apt-get install radeon", it spits out "E: Couldn't find package radeon"
View 12 Replies
View Related
Aug 4, 2010
I've installed openSUSE 11.3, and I want to have hardware 3D acceleration on my Radeon 5850. Far as I can tell, I don't have any right now (for example, I installed armagetron and it uses software rendering).
I'm a technical enough user, but I'm new to openSUSE and to Linux, and my previous attempt of installing ATI drivers (proprietary ones on Fedora) resulted in the OS being unable to boot. I figure that asking for directions would help make things work out better this time.
View 7 Replies
View Related
Nov 11, 2010
I got 11.3 64-bit installed properly the first time around and working with a Radeon HD4350. I noticed X to be somewhat sluggish on certain apps under KDE so a couple of days ago I tried to install the Catalyst 10.10 tool from the unofficial repository. I didn't like it and uninstalled it.
After some research it turned out that the proper driver is radeon so I uninstalled the radeonhd driver and rebooted hoping Xorg will pick up the radeon driver automatically as it is included with my kernel. Didn't work and I couldn't even get past the failsafe login screen. Regular boot doesn't even get to the login screen. Just hangs and won't respond to any keyboard commands.
I followed the instruction at this SDB Configuring graphics cards in openSUSE 11.3 using the ATI Xorg -configure option from level 3 console and creating a radeon xorg.conf file. It all works to the point of "startx" as regular user which just brings me back to console. Rebooting and does the same things as before under failsafe and regular. Even nomodeset doesn't help. The output error from startx in failsafe console mode is the following:
Code:
Could not open library ksmserver: Cannot load library /usr/lib64/libkdeinit4_ksmserver.so (libatiuki.so.1: cannot open shared object file: no such file or directory) reinstalling is not an option as I have a lot of custom stuff on this box.
View 9 Replies
View Related
Feb 20, 2010
I just downloaded ATI Radeon x700 driver from Quote:[URL]..the file name is
Quote:
ati-driver-installer-9-3-x86.x86_64.run I gave permission as Executing file as program. I run as sudo from terminal but I get this error Quote: Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.31-20-generic; make sure that the version is being correctly set by --iscurrentdistro
View 1 Replies
View Related
May 13, 2010
I installed Lucid when I had my Nvidia board in the computer. Yesterday I pulled out the nvidia board and installed my new Radeon 5750. Hearing that the Open Source driver is the way to go, I first decided to try that. I edited xorg.conf replacing "nvidia" with "radeon", since this is the module name (right?) but it still doesn't seem to load. Does anyone have an example of what a properly configured xorg.conf is supposed to look like using the ATI Open Source driver? I get X up and running in "low graphics mode", but can never get beyond that.
Trying to turn on window effects causes a "searching for drivers" dialogue to appear and then disappear without success. A quick "glxinfo |grep -i render" indicates that it is indeed in the software mode. I even tried to manually modprobe the radeon module and restart GDM, but still nothing. At first I thought this was a limitation of the Open Source drivers on 5xxx series boards, but this page suggests that it should work in "gold" status. I have since installed FGLX and it is just terribly buggy, so I am hoping to use the Open Source driver.
View 5 Replies
View Related
Sep 14, 2010
I've always had and used Ubuntu. When I installed and did not like the stability of a certain version, I just reformatted the partition and used LiveCD. OK, on a virgin SATA, 300-gig partition, I installed 10.04 and that took the ATI Radeon 3rd-party graphics driver. No problem. Then, the family wanted 2 languages on the machine. The German keyboard screwed me in terminal and I wiped out Home and all their data. I used Scalpel to image-carve 300-gig onto a 400-gig partition and tried to re-install Ubuntu 10.10.
The ATI's fglrx will not install, that's the error. That same file prevents upgrades of Ubuntu to current status.
is this thread current for my problem with 10.10?
http://ubuntuforums.org/showthread.php?t=651566
Or, do I have that 400-gig with the backup cross-pollinating?
View 2 Replies
View Related
Sep 24, 2010
The last few weeks I have been dual monitoring from my lcd monitor to my hdtv. LCD was connected via vga and my tv via hdmi. To my knowledge, my pc has two graphic cards, both ATI Radeons. One I believe is on the mother board, ATI Radeon 4200HD series, and the other is in a PCI slot ATI Radeon 5600HD series. I think that when I had it dual monitored the tv was connected via 4200HD and LCD via 5600HD (could be wrong).
What I Did: Everything was working fine (i was mainly just using the HDTV as my only monitor and main monitor). As you can guess I was gaming on the hdtv, but I was not satisfied with the slight lag I felt. So I looked at forums to see what I could do and they mostly said 1) change settings on tv to game mode, 2) turn off vsync on your graphics card. So I did #1, but when I tried to do #2 I could not open my graphics cards "menu" aka CCC aka Catalyst Command Center.
So I read up on why this might happen and they said I should uninstall drivers and reinstall the drivers, so I did this as well (with most current drivers from the AMD site, version 10.9) and still I could not get into the CCC. As I was reading more forums, they were saying the 10.8 version mainly has this problem. So what I did was I downloaded 10.7 (did not install yet) and uninstalled the new 10.9. When I went to reboot the cpu after the uninstall of 10.9 there was no display on my HDTV.
I figured I just need to go back to my LCD which was still hooked up to my cpu. No display there as well. I tried dvi and vga hook ups from the monitor to both graphic cards but nothing worked to get me a display. I also tried my girlfriends monitor, which only has vga, to both graphics card and still nothing worked. So at this point I have NO display. After about an hour of trying different combinations of cords, monitors, plugs, tv's etc.,
I RANDOMLY somehow got a display with my girlfriends monitor vga to the 5600 card (I think). I had to hold the vga cord a certain way on attached to the monitor in order for the display to work. So since I had a display, I quickly installed 10.7. After installation, it did not prompt me to reboot (which I thought was weird) so I just went to properties and tried to change the resolution to the max 1600x something, to see how it looks. The screen went blank and the display never reappeared. Now I basically have NO DISPLAY again.
View 1 Replies
View Related
Feb 19, 2011
is it possible for me to get this driver for Ubuntu v 10.10? This is the only thing stopping me coming over fully from Win7 right now...
View 1 Replies
View Related
Mar 20, 2010
I just installed OpenSUSE 11.2 x86_64 on a new computer with ATI Radeon HD 5770 graphics card. I have included ati in the update repositories. I saw that x11-video-fglrxG02 and ati-fglrxG02-kmp-desktop are NOT checked, so, I selected both in YAST2, then, OpenSUSE started to download the required files. but, in the middle of downloading, I got a "wrong digest", said that ati-fglrxG02-kmp-desktop has wrong checksum.
View 4 Replies
View Related
Mar 29, 2010
I have Radeon HD 3870, which is limited to 2D purposes I understand...
Will this mean that I cannot use DRI? Will it have a performance impact in 2D applications?
Does DRI make watching movies on PC 'better'? Especially 720p ones.
View 3 Replies
View Related
May 17, 2010
Fedora 12, latest kernel, x86_64.
I have an Asus M4A78L-M motherboard that has integrated ATI Radeon HD3000 video. Should I be looking for a driver specific to the integrated video, or should I be looking for a driver specific to the motherboard? I'm not sure if I should look for something different if the video is integrated onto the motherboard, as opposed to a separate video card. This is what I found: http://support.amd.com/us/gpudownloa...5&lang=English
Are there best practices for updating video drivers before I make any changes? I don't want to hose my video.
View 12 Replies
View Related
Apr 21, 2010
Where can I find the firmware driver RS780_pfp.bin for ati/radeon? [URL please]
Trying to resolve this message.
[ 2.880560] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
[62.880180] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[62.880262] [drm:r600_startup] *ERROR* Failed to load firmware!
View 2 Replies
View Related
