Programming :: Parsing Text Files In Bash / Cant Seem To Read The Array Back?
May 29, 2011
PI'm trying to write a script to list all open ports in the MINIUNPND chain in iptables and use the procotol, port and destination ip to open ports on another router using upnpc.Here is the output of iptables -L MINIUPNPD
Code:
>iptables -L MINIUPNPD
Chain MINIUPNPD (1 references)
target prot opt source destination
ACCEPT tcp -- anywhere 192.168.3.124 tcp dpt:19955
ACCEPT tcp -- anywhere 192.168.3.124 tcp dpt:20054
ACCEPT tcp -- anywhere 192.168.3.130 udp dpt:10654
ACCEPT tcp -- anywhere 192.168.3.121 tcp dpt:29955
code....
No matter what i do i cant seem to remove the first 4 characters from the MYPROT array to leave only the digits. Also i cant seem to read the array back???
I thought it would simply be a loop reading each line and passing the fields in variables, executing upnpc commands i need then moving to the next line of the file until it reached the EOF.
View 12 Replies
ADVERTISEMENT
Jul 22, 2010
AKA "zipping on the fly .. the slow-as-molasses way." The list includes full pathnames to each file, and they're all in subfolders of the same parent folder (which, unfortunately, is not the root folder of the drive or system on which the files reside). A cleaned-up and radio-ready portion of the list looks like
Quote:
.../taiga/ahqr-va-choyvp/bv0884-073.jpg
.../taiga/ahqr-va-choyvp/bv2635-073.jpg
.../taiga/ahqr-va-choyvp/bv3067-175.jpg
[code]....
What I'd like to be able to do is zip all the files in the list into a single archive, to avoid the step of having to copy them to the same location (presumably another folder on the HD) and then zip that folder. I'm more inclined to make provisions about extracting to a single folder at some other time. Is this possible in BASH, or would I have to consider a faster, more robust scripting language such as python or perl?
View 8 Replies
View Related
Aug 11, 2009
Is there a way to process individual characters one-by-one from a text file in Bash, or is that hoping for a little too much from this lovable old clunker?
View 13 Replies
View Related
Sep 24, 2010
Code:
test=(1 2 3 4 5)
for car in ${test[@]}
do
echo "Element : $car"
[code]....
if variable $car equals 1, new element is added "6" to an array. But i don't know why when i am printing all elements of this array (echo "Element : $car") this element ("6") is not mentioned, but if i make a command which check an amount of contained elements by array it will be 6 elements.
View 14 Replies
View Related
Sep 18, 2010
I have a file (called twitterstatus.tmp) that looks like this:
Code:
<status>
<id>24854489768</id>
<text>Are we gonna ride the sun home?</text>
<id>55266987</id>
[code].....
How could I feed this into an array, with each element containing everything between the <status> </status> tags?
View 9 Replies
View Related
Mar 11, 2011
For example, I have a text file with data which lists numerical values from two separate individuals
Code:
Person A
100
200
300
400
500
600
700
800
900
1000
1100
1200
Person B
1200
1100
1000
900
800
700
600
500
400
300
200
100
How would I go about reading the values for each Person, then being able to perform mathematical equations for each Person (finding the sum for example)?
View 13 Replies
View Related
Oct 9, 2009
I have a script almost working except for 1 thing. What I'm trying to do is read a file that has the files that need to be FTP'd using a bash script. I have everything working except the reading of the file. It works outside of the ftp script I've wrote but once I put it in the FTP script it doesn't.
Here's the Script:
#Here's where the problem is that I know of
I've been playing w/ the exclamation points to see if that could be the problem, but so far no luck.
View 6 Replies
View Related
Sep 15, 2010
im making a program (for the heck of it) that rewrites it code everytime it is run.(my ambition is to turn it into my c++ teacher and watch her be confuzled as to why she cant read my code and why it does weird things) Ive just started c++ programming, and managed to rewrite a program so that when it is run a second time, it says hello world. My problem is that I can only input the file as a single string. What I need to do is to be able to input the entire file into the c++ program, as a single object and then ifstream it out with the destination as the source code.
Also, it would help alot if there was someway to write additional lines to an existing text file instead of overwriting what is already there. That way, every time my c++ runs and rebuilds itself, it adds another couple of lines of code to a txt file and when the final iteration is complete, it loads a text file that was created by the program and uses it to program itself. I heard there is some sort of spawn command, can it be used to open up notepad and write to it? it would be awsome if my various programs could open different notepads with various messages
View 2 Replies
View Related
Jul 7, 2011
bash 3.1.17(2) I'm trying do write a shell script which must operate on each line of an ASCII text file. So, all the code must be inside a loop, and inside the loop, the first thing should be to read the next line from the file. I have the bash read command. But it reads from stdin. Any way to make read from a file?
View 6 Replies
View Related
Apr 8, 2010
bash script:
Code:
$ bash --version
bash --version
GNU bash, version 3.1.17(2)-release (i486-slackware-linux-gnu)
Copyright (C) 2005 Free Software Foundation, Inc.
Code:
[serv:]$ cat test.sh
#!/bin/bash
[Code]...
The question is, how to config it works through 'function cool {}' or cool() {} with position parameter
View 5 Replies
View Related
Apr 6, 2010
I've searched online and found many examples using getopts, but nothing that clearly explains it use, nor any examples of what I'm trying to do. I have a script named "process". It can take from 0 to 3 different options. I'd like to be able to handle these options regardless of the order that they are entered.
Syntax:
process [-v] [-d #] [-h|-?] [string]
-v = verbose mode on
-d # = how deep to do the process, expecting a number parameter
-h or -? = show command usage
string = only process lines containing the specified string
[Code]..
View 5 Replies
View Related
Oct 14, 2010
I have a bash variable where the content looks like this where ;f1; and ;f2; are delimiters:
;f1;field1value1;f2;field2 value1 ;f1;field1value2;f2;field2 value2 ;f1;field1value3;f2;field2 value3
So what I need is to extract and put into variables each combination of f1 and f2 in a loop to something like that:
#first pass of the loop I need:
f1=field1value1
f2=field2 value1
#second pass of the loop I need:
f1=field1value2
f2=field2 value2
# third pass of the loop I need:
f1=field1value3
f2=field2 value3
View 15 Replies
View Related
Jun 20, 2010
I looked on the net for such function or example and didin't find anything, thus after having made one i guess it would be legitimate to drop it to see what others thinks of it.
#!/bin/bash
addelementtoarray()
{
local arrayname=$1
[code]....
View 10 Replies
View Related
Oct 18, 2010
I have two txt files containing x and y coordinates: xcoord.txt & ycoord.txt. I need to open them; read them line by line to get each coordinate; then each time I need to update Xs and Ys parameters inside another file called "dc.in" with the grabbed values.
Finally each time I need to run two exe files ( dc_2002 and st_vac) and produce corresponding output for each Xs and Ys ( dc.in is an input file for this exe files)
I have written the following code but it does not work:
View 14 Replies
View Related
Sep 12, 2010
I currently have 3 files with floating point data that I wish to have in a single file with the format:
Code:
F1 F1 F3 Output
a1 b1 c1 a1 b1 c1
a2 b2 c2 a2 b2 c2
a3 b3 c3 a3 b3 c3
a4 b4 c4 a4 b4 c4
View 3 Replies
View Related
May 2, 2010
i am on processing text tasks And i found that if you assign a text to a variable is chomp'ed automatically the newline
Code:
variable=$(cat file.txt)
The problem is i can only access the items/lines using:
Code:
for line in $variable
do
echo $line
# Other commands
done
how do i convert this to an indexed array. More importantly, how do i get access to individual $line[0], ..., $line[n] Another thing, if the file.txt, has lines with spaces it is a mess using the for...in..., but echoing prints line by line...o_0
View 11 Replies
View Related
Jan 24, 2010
simple bash code:
Code:
#!/bin/bash
trap "echo 'you got me'" SIGINT SIGTERM # to trap ctrl+c
echo "Press ctrl+c during 5 sec loop"
for ((i=0;i<5;i++)); do
[Code]...
How come code behaves normally and stops when ctrl+c signal is caught and resumes, but after I use at least one timeout read in the code it looks like, if signal is caught again it doesn't pause the execution but skips the loop. If you remove -t (timeout) option from the read, both loops look the same!
View 10 Replies
View Related
Jan 17, 2010
The author (somewhere on these Ubuntu forums directed........ Ctrl + Alt + F1 which I thought was going to be the "Terminal" but nothing similar. I have about a half dozen different names/passwords for Ubuntu but none will work to log in. How to get out of this text console and back to Ubuntu GUI? And, how to read my lost LogIn name and password for this "Text Console"?
View 2 Replies
View Related
Oct 20, 2010
I know that this is a really simple thing to do but I just can't figure it out. How do I read a text file into an array in C++?
View 3 Replies
View Related
Nov 28, 2010
Is it possible to have an array in Bash that can hold more than one value per item?
For example I would like an array like this:
Entry 1: apple, green
Entry 2: banana, yellow
And be able to call the fruit names and their colour in a list. Something like:
for fruit in "${array[@]}"
do
echo a $fruit is $colour
done
If that is possible, is there a limit to values per item? For example some entries in an array could be:
Entry 1: apple, green, round, pips, tree
Entry 2: banana, yellow, long, skin, tree
And I would like to pick out the values such as #3 being "round" and "long".
View 3 Replies
View Related
May 13, 2010
I have this code:
Code:
original_content=${content[@]};
echo ${#content[@]} # is 23
echo ${#original_content[@]} # is 1
I'd expect original_content should be copy of content. How to copy array?
View 2 Replies
View Related
Jun 10, 2011
I have a text file that contains a single word and I want to write a bash script that will read the word from the text file... The following is my incorrect attempt, as it assigns the name of the textfile to the variable as opposed to the word stored within the textfile:(assume I have a text file value.txt that has its contents a single word, say wordone)
Code:
#!/bin/sh
for f in value.txt
do
echo $f
done
so the output of the above script is value.txt, however I want it to be wordone.to summarise: how do I assign the value of the word contained within a textfile to a variable?
View 1 Replies
View Related
Oct 14, 2010
I am using gnu bash 3.2I need to split the string into array like
a=this_is_whole_world.file # split [_.]
I need to split this on _ and . some thing like this
a[0]=this
a[1]=is
a[2]=whole
a[3]=world
a[4]=file
preferable using bash regex. if not sed is also ok.
View 2 Replies
View Related
Mar 29, 2011
I'm trying my hand at arrays in bash for a backup script. Now I not sure if this is the correct thing to do and just look at website and amended but does'nt work. Could someone tell me where I'm going wrong
LOG_DIR="/home/ops/Desktop/temp"
array[0]=3
array[1]=/home/ops/Desktop/dir1
[code]...
View 8 Replies
View Related
May 19, 2011
I have the following function that does not iterate through the array I want to be able to do some manipulation on each element in the array[@].it appears the below array has only one item in the array whereas i want the array to have 3 items hence the loop three times printing the message Any ideas why this is not happening ?
function foo() {
name =$1
array=( "$2" )
[code]...
View 5 Replies
View Related
Oct 28, 2010
EDIT1: I should note that I was trying to do this in PERL, not sure if other alternatives are more simple?EDIT2: I should note that for text file 3 (reference), it's a long list of MANY cnp_id values and their corresponoding chr, start, and end values. So, the code will have to take the cnp_id from text file 1 and/or 2 and search through textfile 3 (reference) to match on the cnp_id and then take the corresponding chr, start, and end values and add to the relevant line in the output.EDIT3: Sorry, I should mention that the text file entries are all tab-delimited.I have 3 text files:File 1:Columns represent sample IDs (sample_id) and rows represent CNP IDs (cnp_id). Cells represents the confidence level (confidence) for each sample and CNP.Quote:
cnp_idP5E6_SNP6.0_JHP5_010408.CELP5E11reh_SNP6.0_JHP5_011808.CELP7C7_SNP6.0_JHP7_021208.CEL ... etc.
CNP100.0044798340.0027929510.00305613
[code]...
View 6 Replies
View Related
Aug 21, 2010
it's been a while since I logged on here! I've been trying my hand at a little perl and have hit a brick wall.I'm using the Imagemagick module to manipulate some images. I can get the following to work without issue:
Code:
$teampath = "/var/www/team1";
$player=Image::Magick->new;
[code]...
View 1 Replies
View Related
Apr 26, 2011
I am looking for an easy way to convert any given maze.txt of any size to a internal array of strings(dynamically allocated). Important is that dimensions of the maze (row, col) shouldn't be written by the user instead they have to be somehow read from the file. This is not my homework assignment! It is a small part of a project that i never dealt with. I never read files to C string.... I made it for specific maze dimensions, but want it to work with any given .txt file.
View 9 Replies
View Related
May 18, 2010
I want to list the contents of a zip file amd put each entry into an array. I've been doing
[code]....
View 4 Replies
View Related
Apr 30, 2010
...and returning the index of the found element in its array.
I have:
for ((i=0; i < ${#array1[@]}; i++)); do
# Read each line of the file test
if [[ $(eval "sed -n '$(($i+1))'p test") == *${array2[0]}* ]]
stuff
I want to find the index of the found substring in array2 and only if it isn't found, move on to the next element of array2. I don't know the size of array2 so that [0] has just got to go.
View 14 Replies
View Related
