so i have a file that has the following
file1.txt
ID1 age_11 dog_n3 parent_dog_n1
ID1 age_7 dog_n4 parent_dog_n3
ID1 dog_n5 age_4
ID1 dog_n6 age_4
[Code].....
As you can see i would like the output file to be just the dogs, not the otehr information. But because the information is mixed up how can i extract only the dogs? (i cant do and awk '{print }' because the dogs are found in colounm 2 or 3 or sometimes even 4.
I have a output file look like this:
{"test1" : "test2", "test3" : "test4"},
How can I read word by word in each line?This is not working code:
a=0
while read word
do a=$(($a+1));
[code]...
I need a command to find the all files which filename contains the text "SomeText" and to delete that files!From /home/movie/wp-content/uploads/this folder I have lots of files and folders .Also I need that for folders and subfolders who contains some text in folder name "someTextInFolderName"
View 13 Replies View RelatedTrying to change to upper case first letter of every word over a specific column.
View 10 Replies View RelatedI'm using bash under Ubuntu.Currently this works well for the current directory:catdoc *.doc | grep "specificword" But I have lots of subdirectories with .doc files.How can I search for, let's say, "specificword" recursively?
View 2 Replies View RelatedI have an old-address-list file which is having around 1500 entries. I need to convert this addresses in to a specific format.
The old-address-list file>
# cat old-address-list-file
dn: CN=Muhammad Hadhi K.M,OU=IT Dept,OU=Example Company H.O,DC=example,DC=com
cn: Muhammad Hadhi K.M
[code]....
I have text file with say 1000 lines.And I want to display lines numbered 100, 203 and 297 using a script/ command.How can I do this ?I can print a particular line using:sed -n '100p' file1 (where file1 is input file).
View 6 Replies View RelatedWell, I am facing one issue:How can i read two files word by word at a time using any loop as i need word by word comparision in shell script?Please let me know pseudo code.
View 14 Replies View RelatedI am pretty new to bash scripting...I am trying to write a script that will take an input and read it word for word and then DO something with it like echo. I have been able to find how to read word for word from a file but I don't know how to do it with input.
I was looking for something like
Code:
exit 0 The input would be A-Z a-z 0-9 and have a single space between each word.
I want to know that how can i search for a word in a file and then comment it or delete it. I know this command works.
sed 's/word/#word/'g inputfile > outputfile
But the lines in my input file are as under:
zone "abc.com" { ---- This line can be comment
type master; ----- This line repeat again and again in the file
file "abc.txt";
allow-query { any; }; -This line repeat again and again in the file
};
I want to know how can i comment a certain zone.
I have grepped a log file to obtain every line that contains a word (let's call it 'blah'). I now want to only display a list of entries within that search result that feature the word 'host' anywhere in the line, and I also want to display the single word *after* 'host' (up until the next space). So, the end result will look like this:
[Code]....
Id like to share with you a strange behavior I�ve been seen with the printf C language function running in Fedora.The code opens a file as showed:descString = fopen( strcat( stringName, txt), a+);There are also some printf functions in the code.However, instead of the printf functions to print their content at the screen, theyve been printing them in the file with the descString file descriptor.Have you ever seen something like that?To print something to the file I use the fprintf function. I didn't make a mistake to confuse printf with fprintf. I'm sure.
View 2 Replies View RelatedI was reading through the source code of adventure in the bsdgames package and I had noticed that most of the text is read from a file called glorkz. I'm wondering about what function/technique the author used to print from the file; I've been looking through the code for a while (particularly io.c) and I haven't been able to figure it out.
View 3 Replies View Relatedtell me the command used to find a specific word in directories and sub-directories in linux?
View 4 Replies View RelatedI am a beginner with php ,trying to work my way through.
I have a file to be written with particular indentation and by appending some special characters...
this is the o/p file i wanted. could anyone please guide me as to how i can write it? code...
To save on the writing of WAY to many files with very little in them, I want to put it all in one file and read a specific few lines. There will be six variables to be read at a time. Format is as such:
//Set 1
string name
5
12
[code]....
From name to 5th number is a set. The name will be of different lengths for each set. This will be a big file of probably 40+ sets. My problem lies in reading one and only one set be it set 5 or set 34. It needs to be done in C++.
I'm trying to come up with ideas for a simple way to strip a specific "entry" from a text file.I know tools like sed and perl can remove specific lines from a file but I haven't been able to come up with an elegant way to do my group of lines.In my file, the first "Location" line and the "SVNPath" line should be unique every time... but are they enough to strip out the whole set of the group plus the trailing one line of white space separating each group? Add to this, my file will grow as new entries are added (always appended to the end) but new entries will have the same formatting.
View 9 Replies View RelatedI need a shell script which gathers the data from a remote XML file and then displays it according to my needs.. I need this for my job due to the fact that I need to keep track price changes of euro, usd, gold, etc. The XML file I am talking about is located at this page: here. The reason I am posting the URL is that I need to use curl to get this file and it does NOT have newlines after each tag. I thought that that would be a problem. Here is what I need from the script: 1) curl to get the page 2) make use of sed, awk, etc. to display its contents in a more structured and readable manner as shown below:
A: 64.125 (% -0.26)
B: 81.130 (% -0.32)
C: 1.4930 (% 0.00)
D: 1.9590 (% 0.36)
I'm new to bash scripting and I've searched around the forums and Internet for this but haven't had any luck. I've found similar things but not what I need. What I need to do is write a simple script that uses what the user inputs to locate and display where a file is. I would prefer to use locate instead of find since I know that the person I am writing this for has locate on her machine (my mom, who is just beginning with Linux).I'm writing the script to make things easier for her while she learns In this particular part of the script I would like to be able to have the script prompt to enter the file she is searching for, read the her input and then display for her where the file is. I realize it would in most cases be much simpler just to teach her how to use locate, but she is very impatient and this is just a part of the script I will be writing, but I can't figure out how to do this.
View 6 Replies View RelatedI'm trying to extract specific lines from a flat file. I need lines that fall within a range of coordinates. The -F can be either ! or = If the line is in this set range I need all of the data on that line. ranges lat 36 to 39 and longitude -74 to -84
awk -F '=' '{lat=substr($2,1,2); lon=substr($2,10,3); (lat >36 && lat <39) && (lon >-74 && lon <-84); print lat"--"lon}' < net.log
example line from the flat file
K4MQF-3>APN383,VA2-2,qAR,N3HF-5:!3818.65NS07800.17W#PHG77306/W3,VA3/Clarke Mnt
I have a file which contains milion of records. It contains 12 columns seperated by "||" (delimeter).
First two fields contain first name and last name of a person. Now my requirement is to delete all those records from this file for which:
First two fields does not contain any alphabet.
For e.g i have below mentioned records in file:
gaurav||gandhi||123||456||789
#a%bcd||123abc||89|90||91
12345||@@@||89||123||234
***||!!!!||98||76||90
Now, last two lines should be removed from this file since first two fields does not contain any alphabet for these two records.
I have a text file which stores the list of files & dir, I want to get only file's extensions from this file & want to store it in another file.eg, below is the file's contents & from it I want to get the extensions sh, pl & h & want to store it in another file. Also I don't want directory list.
A scripts/services_restarter.sh
A scripts/svn post_commit scripts
A scripts/tmp/
[code]...
I need to search a bunch of files in a specific folder for a specific number and add all the numbers together to a total sum. I use Rsync everyday, everytime I run rsync i get a logfile (rsync output) witch contains the textstring "Total bytes sent: xxxxxx".
The "xxxxx" can vary in lenght. I need to extract the "xxxxxx" from each file and add the numbers together to a total size over a week or a month. Is this possible? And I wish to only use bash. One way of doing stuff at a time my friends .
I want to replace specific character in a file after every specific line. example as follows.
O 000000000000000000
A 111111111111111111
C 222222222222222222
[code]...
I've a webserver with a lot of documentary to serve. Some of the users have problems with the new microsoft documents like docx. Internet explorer 7 want to open the file like a zip-file not as word document. I've googelt around and found a solution that didn't work for me: [URL] I've added at /etc/mime.types
[Code]....
After a restart of httpd , nothing chance, always the same failure with internet explorer 7.
Want to search for ~ and delete it as well as to append the entire line to the above line. For Ex:
1111xxxx date Sandy area is ~around this area.3222xxx date There seems to ~left side of map, the colours are accurate (showing green areas)Even if I ~zoom in, the green parks, xxx3258 date The dammed up
~away, the "other" body of water varies ~blackNatural gas leaching.
IT MUST LOOK LIKE:
1111xxxx date Sandy area is around this area. 3222xxx date There seems to left side of map, the colours are accurate (showing green areas)Even if I zoom in, the green parks, xxx3258 date The dammed up away, the "other" body of water varies blackNatural gas leaching.
i jst want to delete a host entry from httpd.conf the entry for lal.com should be deleted!!
View 14 Replies View RelatedI have these but not working.
size_t count_words(const std::string& s)
{
std::istringstream is(s);
return distance( std::istream_iterator<std::string>(is),
std::istream_iterator<std::string>());
}
and
std::string s; // word count
unsigned int wordno = 0;
while(getline(myfile, s))
{ ++wordno;
if(s.empty())++ wordno;
else wordno += count_words(s);
std::cout << s << '
';
}
myoutput1<< "Number of words : " << wordno << '
';
myoutput1 << "
Word" <<" " <<" Occurrence" <<endl;
myoutput2<< "Number of words : " << wordno << '
';
myoutput2 << "
Word" <<" " <<" Occurrence" <<endl;
I have to modify formsweb.cfg file in Oracle IAS.
Problem description
In formsweb.cfg file are two lines with labels archive_jini= and archive= at the beginning of line. After equal sign (=) is row of filenames of java archives delimited by coma(,). When I insert a new jar file in java directory, I have to append the very same name of jar file to both lines if that name is not yet present.
Example snippet from formsweb.cfg
I'm building a script for my place of employment. The next step in it is checking what the user input was. Determining if they added a part in there or not. The script prompts for a hostname. Hostnames are localhost.localdomain. Now, I want the script to check to see if they put localdomain and if they did, not to add the domain to the /etc/sysconfig/network, but just what they entered. So say the user inputs:
[Code]....
