Programming :: Perform The Operation In Script On Such Directories?
Dec 24, 2010
I have mounted remote Windows share using CIFS and writing bash script for those files. However being a windows share since there is a space between directory names like "Program Files" and hence I am not able to parse it through bash script and script exits with error.
Does any one have any idea about how to perform the operation in script on such directories?
e.g.
cd /tmp/temp/Program
Error: No such File or Directory
cd Files/
Error: No such File or Directory
View 3 Replies
ADVERTISEMENT
Nov 22, 2009
Here's a brief description of my system:
120GB Sata HDD - Primary OS drive
3 x 1.0TB Sata HDD - Raid 5 array
This is on a C2D MSI P35 Platinum board. Anyway, did a fresh install of F12 on the 120GB, which I had problems with - Anaconda refused to see the drive. Fedora Live could see it fine, and it was listed as an 'nvidia_raid_member' - no idea why, but I completely erased the disc under the Live CD and proceeded to install F12.
Once F12 was installed, I loaded up mdadm to re-activate my Raid 5 array, using 'sudo mdadm --assemble --uuidthe uuid) - and it started with only 2 of the 3 drives. My /dev/sdb drive did not activate into the array, due to what mdadm said was a mismatched UUID. Ok, so I erased /dev/sdb, intending to rebuild the array. Erased /dev/sdb, and then attempted 'sudo mdadm --add /dev/md0 /dev/sdb' and I get this error: "mdadm: Cannot add disks to a 'member' array, perform this operation on the parent container" - I can find NO information on this error message.
[Code].....
I don't believe the hard drives are connected in the exact same order they were in before - I disconnected everything in the system and blew it out (it was pretty dusty)
View 1 Replies
View Related
Feb 1, 2011
I am really a Newbie in bash programing and I need to perform a permutation, which I did using one post from this forum as follow.
#!/bin/bash
list=`echo {1..12}`
for c1 in $list
[code]....
View 5 Replies
View Related
Apr 7, 2011
how to perform floating point operations in kernel? i answered that its impossible to perform floating point operations in kernel.but he is telling that its possible but with some feature to be added.can any body know about this perfectly??
View 1 Replies
View Related
Apr 5, 2010
i am having problem with the following code(trying to updoad a file):
Code:
HINTERNET internet;
HINTERNET ftp;
internet = InternetOpen(NULL , INTERNET_OPEN_TYPE_DIRECT , NULL , NULL , 0);
ftp = InternetConnect(internet , "127.0.0.1" , INTERNET_DEFAULT_FTP_PORT , NULL , NULL , INTERNET_SERVICE_FTP , 0 , 0);
[code]...
so FtpPutFile returns the following error:
Code:
12003
200 Type set to I.
200 PORT Command successful.
550 Operation not complete
View 2 Replies
View Related
Nov 29, 2010
I am writing a program to send data over serial port but the sending and reading operation is not occurring as desired to be... Below you can see the read and write parts. Could you please help me to find where I am doing wrong...
Reading Part:
Code:
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <termios.h>
[code]....
When I compile and run the above programs Reading part does not read the 13 bytes once it first reads 8 byte then 8 again then 2 and so on. It always divides the sent data...
View 8 Replies
View Related
Sep 18, 2010
I do not get what this method is seeking for? Where do i put a string or somethig that its sopposed to find.
[code]...
Seeks in the stream by the given offset, modified by type. If cancellable is not NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error G_IO_ERROR_CANCELLED will be returned.
[code]...
TRUE if successful. If an error has occurred, this function will return FALSE and set error appropriately if present [URL]...
View 2 Replies
View Related
Apr 23, 2011
Any simple linked list c progrom for push and pop operation. I googled for that but i didnt get any simple program.
View 5 Replies
View Related
Mar 20, 2010
what are the series of files that are called when a user make copy operation from usb mass storage to hard disk?i have reached the code of the usb mass storage in linux kernel 2.6.33 and i want the exact code the make the copy how can i do that?
View 2 Replies
View Related
Apr 4, 2011
I need to walk in folder recursively in C. To change the directory, I can use chdir, but how I can get the directories of a directory?
View 3 Replies
View Related
Aug 5, 2010
I need to find if, in a folder any directories exist, except a certain one named "mes croquis".What I am trying to say, is that the re already is a directory named "my croquis", which I have to ignore. IF any other directory appears, I have to archive them.I got everything so far, except the starting condition.In other terms , I am lookign for something like this:
IF anyDir EXIST AND name != "mes croquis"
do something
else
[code]....
View 2 Replies
View Related
Feb 23, 2011
I am trying to search particular directory which has files with extensions like .html,.mp3,.xml etc I have a list of such files
What I am doing in my script is
for file_name in `find /home/ -name index.html -o -name song.mp3 -o -name help.xml`;
do
if [ $file!='' ]
then
[Code].....
View 4 Replies
View Related
Mar 9, 2010
i made a program to list all the files in a directory,is there a way to determine what are directories and what are files ?
View 5 Replies
View Related
May 28, 2010
I'm having problems figuring out the process to find directories that DO NOT contain a certain file. I have a mp3 collection that all the album art is name "folder.jpg". Not all the albums have images. I need a way to find the albums/directories that do not contain "folder.jpg". I can find the ones that do contain "folder.jpg" with
Code:
find . -iname 'folder.jpg' -print0 | xargs -0 ls >> album_art
but that is as far as my bash-fu can take me. I'm not really sure what my next step is.
My directory structure is like such: a-z/artist/album/folder.jpg
View 5 Replies
View Related
Dec 8, 2009
I'm trying to figure out how Make handles directories.
How can I modify this makefile so it will put all of the .o files in a separate build directory?
Code:
But make ignores this and still puts main.o in the base directory. And if I refer to the build directory in the dependencies for bandit, make complains about "no rule ..."
I want to keep main.cpp in the base directory, all other sources in the src directory, and all object files in the build directory.
View 14 Replies
View Related
Apr 25, 2011
I have tried this a million ways, got it to work once but it didn't work sitewide for some reason. I have a url: [URL] and I want it to be found by going to: [URL] I am using this
Code:
RewriteCond %{REQUEST_URI} ^/agents/tp/
RewriteRule ^([^/]+)/?$ agents/tp/$1/index.php [L]
and have also tried something as basic as
Code:
RewriteCond %{REQUEST_URI} ^/agents/tp/
RewriteRule ^(.*)$ agents/tp/$1/index.php [L]
I keep getting "The requested URL /JoeAgent/ was not found on this server." why it's not working?
View 4 Replies
View Related
Aug 2, 2010
I am developing a java application that deals with the parallel port I used the parport library, I have the following problem: I am using netbeans 6.9 and linux redhat, when I run the code (java code that controls parallel port) from netbeans I get: "ioperm error: Operation not permitted" I used the "clean and build" function in Netbeans to create the jar file (test.jar) then I changed the permission of the test.jar to root using this command "chmod 4777 test.jar" and the test.jar file worked just fine as a stand alone file, but I still get the same error message when I try to run the program from Netbeans
View 1 Replies
View Related
Jul 21, 2010
I need some direction on a small scripting question. I've been doing some development and storing the code on a network drive with multiple user access. My development is getting complex enough that it is time to set up a svn repo for it. I would like to set up a little script (if possible) that prints a message/reminder to whomever is accessing the code directory stating that the code is ultimately stored in svn and any changes need to be checked in, etc. Is there a way to have linux print a message to the screen based on a 'cd /specific_dir/' command? So far google is mum on the topic. Using Debian and bash shell.
View 5 Replies
View Related
Feb 14, 2011
I have been searching for a solution to the following problem:
When my distro of choice updates Firefox web browser, the directory name is '/usr/lib/firefox-<version>'.
The problem here is that the directory name is dynamic by nature and doesn't allow a simple static solution, e.g.
'cp -rf /usr/local/files/bookmarks.html /usr/lib/firefox/defaults/profile'.
The same quandary applies when adding extensions, changing prefs etc.
I have looked at the following commands:-
find, sed, xargs, grep, awk, fprint.
Unfortunately my grasp of syntax and programming is very simple at best.
View 2 Replies
View Related
Oct 29, 2010
I am supposed to create a script that displays the directories alphabetically with the size of each directory on the left hand size. I know you should use du to check for disk usage. So far i got the directories to display but not alphabetically.
Code:
du --max-depth =1
Example :
41921 Directory
View 2 Replies
View Related
Apr 1, 2011
have a simple script for comparing two directories. I want to list all differences between this directories.
here is my function for compare:
function comp
{
for i in $1/*; do
if [ ! -e "$2/${i##*/}" ]; then
echo $i
[Code]....
in my script these two files are equal(my script ignored last time modified)
View 5 Replies
View Related
Jan 8, 2010
I'm in the midst of making a perl script and I was wondering if it was possible, to say, have a folder with 20 files in it, then move 5 files out of there, into a new one. I would like to to do this until the original folder has no more files in it, but I'm very stuck.
View 3 Replies
View Related
Jan 8, 2011
This simple task is proving harder then imagined. I have a multi-level directory that I'm trying to clean of duplicates, but I can't get 'find' to print what I need to see. To give an illustrative example, here is a dir:
Code:
stuart@stuart:~/testdir$ ls *
dir1:
level2:
dir1
So the output of find as i'd like it to work would show the two locations of dir1, which would be ./dir1 and ./level2/dir1. But no:
Code:
stuart@stuart:~/testdir$ ls -d */ | head -1 | find . "`cat`" -type d
.
./level2
./level2/dir1
./dir1
dir1/
View 2 Replies
View Related
Feb 11, 2011
It achieves a bash script that takes two parameters (command line). These two parameters must be two paths of two directories (existing, and different such as not being of the other sub-folder). Path1 and path2 are for simplicity.The script will recursively visit the two directories and all sub-directories, sub-sub-directories, etc.. Looking for differences between their contents (files or directories). In particular, suppose that we work with both path1 and path2 directory, and scanned the files contained therein. These situations can occur:
* Path1 exists in a file that is not present in path2: in this case, the script displays the path of the file to you (print screen) and asks if he wants the file is copied in path2 or not. Reads the user's response and acts accordingly.
* Path2 exists in a file that is not present in path1: in this case, the script displays the path of the file and asks if the user wants the file is copied in path1 or not. Reads the user's response and acts accordingly.
* Both path1 path2 in a file with the same name but different contents: in this case, the script displays the path of the two files (which of course will start with path1 and path2 but end with an equal) to the user together with the two dates have been changed last time. Then asks if you want the file to be replaced by one in path1 path2, or that the file is replaced by one in path2 path1, or that both are left unchanged. Reads the user's response and acts accordingly.
* Both path1 path2 in a file with the same name and same content, in which case the script does nothing and proceeds with the next file.This is done for all regular files in path1 and path2. The special file (socket, device, symbolic link ...) are ignored. For folders in path1 and path2 is recursively by:
* Path1 if there is a folder that is not present in path2: in this case, the script displays the path to the folder and asks if you want the folder and all its contents are copied to path2. Reads the user's response and acts accordingly.
* Path1 if there is a folder that is not present in path2: similar at first.
* Both path1 path2 that there are two folders with the same name as the script works recursively on the two folders.
View 2 Replies
View Related
May 21, 2010
Very new to this shell scripting/Linux scripting.
subject_dir=/labs/tricam/MERIT/MERIT_0*
for subject in `ls $subject_dir` ; do
if [ ! -d $subject_dir/$subject/feat/glm2010/doublegz/SRRTA.feat ] ; then
[code]....
View 1 Replies
View Related
Nov 1, 2010
Say I have a directory structure:
And other.c has:
How do I setup the CMakeFiles.txt files in each directory, so the executable "program" (from program.c) is created.
Currently I get the error:
View 1 Replies
View Related
Oct 4, 2010
Using: Open SUSE 11.0 64 bit, KDE 3.5.9 (release 49) and KDevelop 3.5.1. Problem: A singleton was created in subproject A, and so an object file is created in subproject A. In subproject B, I want to use that object file. We have not been able to find a way to link that object file created in subproject A with subproject B. Also, the subprojects are in different directories. We created a symbolic link to the ".h" and ".cpp" files in directory A. And the project compiles and links just fine after adding the symbolic link to the header and cpp files in subproject B. My concern is, that two objects of that singleton will be created. The whole idea of making a singleton is so that there is only one instance at a time.
View 8 Replies
View Related
Oct 17, 2009
I need to, through a bash script, go through a given directory (given as argument 1) to list out the relative path in this directory (including $1) for eact subdirectory which contains files. Directories which only contain . .. and eventually only subdirectories SHALL NOT be listed. It is this last requirement that makes it difficult for me.
I have been using the tree command for now, but I have not found a way to ignore paths to directories which only contains other subdirs or nothing at all in any easy way. I may offcourse test each directory after they are listed but this gives an extra loop to go through and I beleive it should be possible to do it directly when creatring the list. I guess by using find or ls in conjuntion with the tree command or by itself it should be possible but I am not to conversant of nested script commands.
View 9 Replies
View Related
Jul 25, 2011
Im running on Solaris 10 and I am trying to write a script that will look at all the directories in export.home and then grep for the those in passwd and will display the directories that don't have a password associated with them
Here is what I got so far but its not working.
#!usr/bin/bash
for i in 'ls /export/home'
do
test='getent passwd | grep $i'
if [ $test="" ]
then
echo "No Home Diectories Found $i"
fi
done
All this does is display what was listed in the export.home. What I want it to do is just display what was not found in password.
View 2 Replies
View Related
Sep 15, 2010
I am trying to write a simple script to create some directories to organize photos.
Next I want to cd to the newly created dir DATE_BANDNAME, how can I do that?
View 4 Replies
View Related
