Programming :: Delete From Open Parenthesis To End Of Line?
Aug 4, 2010Delete this with maximum prejudice, mods.
View 1 RepliesDelete this with maximum prejudice, mods.
View 1 RepliesWas wondering if any perl guru's could help me with a quick log file adjustment. I have a text file that looks like so (tabs and newlines are revealed so you can see what separates the data):
There are maybe 100 lines of text in this file at any given time. I need to delete all duplicate lines only looking at the first bit of text prior to the first tab. It doesn't matter which one gets deleted as long as there are no two lines that begin with that same text at the beginning before the first tab. So in this example, either the fist line "1234" or the last line "1234" would need to be deleted. I already have code in my script that opens the files - I just need the code to read the text into an array and the part that would find matches based on the above criteria, and make the deletions.
If it would be easier, I can even do a system call and use SED (v4.1.5) and/or AWK (3.1.5) instead.
I have two txt files containing x and y coordinates: xcoord.txt & ycoord.txt. I need to open them; read them line by line to get each coordinate; then each time I need to update Xs and Ys parameters inside another file called "dc.in" with the grabbed values.
Finally each time I need to run two exe files ( dc_2002 and st_vac) and produce corresponding output for each Xs and Ys ( dc.in is an input file for this exe files)
I have written the following code but it does not work:
if the given pattern exists in the file with the very next line starting and endingwith the same pattern , delete the line that starts and ends with the given pattern.So upon running on this file
hai people<PATTERN> we had
<PATTERN>a lot of fun<PATTERN>
writing scripts
[code]....
Is there any method for placing translations in parenthesis at first occurrence? I need something similar to the acronym package, but instead, storing translations and printing brackets only after the first occurrence.
E.g. (pseudo-code):
Results in:
Do you like to eat bananas (xiangjiao)? No I don't like to eat bananas.
In C++ language, we can do the following compound tests,
Code:
std::string a, b, c, d;
if ((a == "Yes" && b == "Yes" ) || (c == "Yes" && d == "Yes")) { ... }
In bash scripts, how can we do the parenthesis around compound tests?
Code:
if [ "$a" = "Yes" ] && [ "$b = "Yes" ] [ "$c" = "Yes" ] && [ "$d" = "Yes" ]; then
...
fi
I have a file with several parentheses, both () and []. All of them should be closed, but apparently, one of them is open. In order to run a program, I need all of them to be closed... For example, if I write: ((bla (bla (bla)) I would have two parentheses missing. That's what I mean. But I have several parentheses in the file... it would take me ages to do it manually. Is there a way to check which parenthesis is open? can it be done?
View 5 Replies View RelatedI want to delete lines which contain the word "Fehler" but for some reason my programm isn't working:
Code: BEGIN { FS="|"
OFS="|"
SUBSEP="|"
[code]...
I would like to delete a single line from a file that contains many lines passing through the same values as the two parameters. Again, I would like to delete a single line and not all those that contain parameters. How can I make bash?
View 14 Replies View RelatedI have a question about sed programming, actually a one-liner for which I cannot find a solution, right now. I need to delete a line matching a specific pattern only if it is the last line. In practice, I would put together the following:
Code:
#
# This deletes the last line of a file
[code]...
i have a file containing contents as
1 2 3
2 2 3
11 2 3
now i want to delete the line which first column content is 1. so, if i pass the parametere 1 to function delete_row. is should remove the first row as
2 2 3
11 2 3
and then write the contents in file.
Quote:Originally Posted by topcatI would like to know how i can write a shell script to delete a line if a particular pattern exists?E.g. I have a text file with multiple lines. Say 1000s. in the following pattern.
username@email.com:149.0.3.4:1
username1@email.com:149.0.3.4:1
username1@email.net:149.0.3.4:1
username1@email.edu:149.0.3.4:1
If the patternusername@email.com exists then the line "username@email.com:149.0.3.4:1 should be deleted from the file.I have a very similar question but I need to delete one line in a file which matches one very precise instance of a string only. Let's assume I have a file composed of thousands of lines and let's call the file chap-secrets. Let's take the following sample entries:
Code:
#USERNAME SERVER PASSWORD IP
pp pptpd blahblah *
[code]....
I am trying to create a shell script, on taking a input file as parameter, which need to do 3 things
1) create a copy of existing file.
2) add a new line to the copied file.
3) strip off all the absolute paths inside the copied file
The first 2 points are straight forward. but i am finding it difficult to acheive the 3rd point. myself not very good with awk and sed. but gave it a shot in vain. For example, the input script consists of below,
PROGRAM=`/usr/bin/basename $0`
HOST=`/usr/bin/uname -n`
echo Start $PROGRAM `/usr/bin/date` |
/usr/bin/tee -a $LOG
The output of the script should look like,
PROGRAM=`basename $0`
HOST=`uname -n`
echo Start $PROGRAM `date` |
tee -a $LOG
I have to delete a certain line of text from the a textfile via ubuntu's shell scripting.I have done research, and it seems that most people advocate the usage of sed /d option. sed makes does not edit the text file. Hence, most options I discovered involved the use of a temporary variable/textfile and then overwriting the old file with the temporary new file. Is there anyway whereby I can bypass the use of temporary storage containers? I hope there is any magical combination of commands to edit the file directly.
View 3 Replies View RelatedI m writing a script to delete a line at particular location.
But i m unable to use variable for specifying line number.
For example.
Code:
works fine and deletes 7th line from my file
But
Code:
gives following error.
Code:
I have two files, file1.traj and file2.traj. Both these files contain identical data and the data are arranged in same format in them. The first line of both files is a comment.
At line 7843 of both files there is a cartesian coordinate X, Y and Z ( three digits ). And at line 15685 there is another three digits. The number of lines in between two cartesian coordinates are 7841. And there are few hundreds of thousands of lines in a file.
What I need to do is copy the X Y Z coordinate (three digits) from file1.traj at line 7843 and paste into file2.traj at the same line number as in file1.traj. The next line will be 15685 from file1.traj and replace at line 15685 at file2.traj. And I dont want other lines (data) in file2.traj get altered. This sequence shall be going on until the end of the file. Means copy and substitude the selected lines from file1.traj into file2.traj.
I tried to use paste command but I cant do for specified line alone.
Here i showed the data format in the file. I used the line number for clarity purpose.
Code:
I want to access a file, and check the length of every line.After, i want to check and replace all lines with length over 10 characters, with a message.Does anyone have a clue on that?
View 1 Replies View RelatedI am trying to write a program in C which compares two files and prints the line that is equal.
Here file1.txt has
and file2.txt has
Note: file2.txt consist of only a single string where as file2.txt has multiple lines. Actually im comparing two files with md5sum values.
Here is the code but it compares only first line of files..but it should compare the whole file1..and sorry iam a beginner in C can any1 sujest some modification to this code so that..it can compare file2 with entire file1
Quote:
I want to insert a line at a particular line number using sed or awk. where line number is not fixed and is in form of variable.
I want to use variable in sed or awk command.I tried something like below, but no luck.
I have filenames like such: abc (e).doc And I want to rename them to abc.doc I have a directory full of files names like this. How can i do this using the sed command? I have looked online for about 2-3 hours now and am frustrated that I can't find an answer.
View 11 Replies View RelatedI have a log file /var/log/messages. Now all i want is to delete the first line through script without disturbing provisioning the file.
View 1 Replies View RelatedI was creating a few scripts, I am trying to create a restore script to restore files that have previously been moved to a folder I selected. When moved I stored the original path for these files all in one text file.
I want to know if anyone can tell me how to delete the line from the file after using it restore the file. I have used the grep command to search through the file "pathName" to find where the file was stored but now want to delete that same line.
I have a project due for my Intro to C++ class and we are suppose to generate a file listing that will take an input of a C++ source code with .cpp extension and make a copy of it with a .lst extention that will have a line number preceding each and every line.
View 12 Replies View RelatedHow can I set indent in .emacs to enable my new line starts from the same position of previous line?
like this;
Hello world <enter>
Second Hello world // "S" starts right under first line's "H"
I wish to add information to one of my files based on matching IDs,
Here is an example
(the id is the 3 colunm)
(the ID is the 2 colunm)
And the output i wish to be
OUTPUT:
So as you can see the ones that do not match are still present, and the ones that do match just have the extra information from file2.txt added to them.
I thought about using join but that only seems to join the ones that match displays thoes only. i would like all the information in the output file.
I currently have 3 files with floating point data that I wish to have in a single file with the format:
Code:
F1 F1 F3 Output
a1 b1 c1 a1 b1 c1
a2 b2 c2 a2 b2 c2
a3 b3 c3 a3 b3 c3
a4 b4 c4 a4 b4 c4
At the moment I have a flat file which is being used by a few people. I want a script to remotely change the file, so I can start logging who is doing what.At this point here is one requirement I am trying to develop. We have text blocks who pretty much look like.I hope this is somewhat clear. I try to find $param for the right $workflow and change that. Can you help me to find $$var3 and change that?
View 1 Replies View RelatedWhen I see a typical reference to a Unix manual, it often follows by a number surrounded by parentheses. For instance syslog.conf (5). I am sure this means something, but Googling it is impossible.
View 4 Replies View Relatedwhen I running vi ,I'd like to run some command(such as dd,p,/word),but I know little of these command,Can I get a manual of that by run some command ,Do you understand what I said,For example,I can run dd to delete the line which the cursor locates,Is there a command (maybe "help" or other)to show the help information about the operation on vim in this condition,not in bash ,not "man vi",
View 6 Replies View RelatedI have a log file which is continously being accessed. Now I want to delete the first line without disturbing the file.Is it possible? The Issue is the log file is being provisioned with ^@^@^@ characters in the first line occupying huge space.So I need to get rid of that. I dont have time to work with root cause but just a script to reduce this space.
View 3 Replies View Related