Programming :: Create The Thread Which Runs Then Drops Out?

Mar 11, 2010

I hope someone can help me with this. I need to call the same thread multiple times, but only run one thread at a time. So what I do is create the thread which runs then drops out. Run the main loop and after some time pthread_create the same thread again. So in pseudo code

[Code]...

I always presumed if I run a thread and it reaches with a pthread_exit, then the thread was destroyed? However I've found that after I've created the thread several 100 times the programme crashes? So can anyone advise how I call the same thread over and over?

View 10 Replies


ADVERTISEMENT

Programming :: Create A Separate Thread For Program Which Basically Polls Using The Read Command?

Sep 28, 2010

I'm trying to create a separate thread for my program which basically polls using the read command. However this new thread seems to block the main thread, anyone know why this could happen.

In main I call this function pthread_create(&mainEventThread, NULL, GenericEventThread, NULL);

which calls
/*New threads start function */
void *GenericEventThread()
{
short int i, nError = -1;

[Code]...

I've used pthread_self to check that a new thread is being created, so why is the while loop in one thread blocking the main thread from running, I haven't used the join function anywhere in my code.

View 2 Replies View Related

Programming :: How To Bind Thread To Specific Thread In Multithread Application?

Dec 25, 2010

I am going to use "pthread_setaffinity_np" to bind a thread to a specific core. My application has two threads. I have used mutex to assign a specific id to each thread and then bind that thread to a core different from another core. but it seems that the os assigns both thread to one core.What should I do to bind each thread to a specific core?

View 4 Replies View Related

Programming :: Unix Programming - Single Thread Server Can Support Exactly 2 Clients At Once

Sep 28, 2010

A simple TCP based chat server could allow users to use any TCP client (telnet, for example) to communicate with each other. For this question you should consider a single process, single thread server that can support exactly 2 clients at once, the server simply forwards whatever is sent from one client to the other (in both directions). Your server must not insist on any specific ordering of messages as soon as something is sent from one client it is immediately forwarded to the other client. As soon as either client terminates the connection the server can exit

View 4 Replies View Related

General :: Create A Signal Handler Thread To Handle SIGALRM Signals?

Jan 19, 2010

I'm trying to create a signal handler thread to handle SIGALRM signals. The main thread calls the following function before creating any other threads

Code:

pthread_t Timer::Init(long _clock_interval_musec)
{
// Set interval.
clock_interval = _clock_interval_musec;
// This is called while in a single threaded environment.

[code]....

clock_interval is 50.

Is the timer not firing? Did I not set my interval correctly? Did I not proper block the signals ensuring the that the default handler would not take care of them?

View 7 Replies View Related

Programming :: Quickest Way To Get Thread Id

Jun 24, 2010

What is the quickest way to get the thread id(tid) of the current thread in linux? Specifically I use fedora 13. ...and I am talking about inside a C++ program.

View 2 Replies View Related

Programming :: Determine What CPU Thread Is On?

Jul 2, 2010

Is there a library/system call that will return to me what CPU core a thread of execution is running on? I've looked for a bit on the net already and also in /usr/include and couldn't find one.

getcpu() and sched_getcpu() are two that I found, but when I include the appropriate header files (linux/getcpu.h, and sys/sched.h respectively), gcc says getcpu.h doesn't exist and the linker complains it cannot find the implementation in sched.h.

I'm sure I'm doing something really stupid or overthinking...

What I am doing is running an OpenMP application and specifying a list of cpu cores to run on with GOMP_CPU_AFFINITY. I want to make sure that each core is getting the same number of threads.

**UPDATE**

It seems that this code works, but only with glibc >= 2.6, and my machine has 2.5:

Code:
#define _GNU_SOURCE
#include <stdio.h>
#include <utmpx.h>
int main( void )

[Code].....

View 3 Replies View Related

Red Hat / Fedora :: Updated 10 App No Longer Runs :Failed To Create XIM Input Context

May 14, 2009

I ran "yum update" and updated my new installation. Afterwards: my main application stopped running. It iis an xwindow app. I am trying to run it from a terminal on the gnome desktop. How can I back out my updates and which packages should I try to remove?

Controller screen Buffer depth 1
void PSLr: :resize (int size): 661
QPixmap: Invalid pixmap parameters
auxillary display font size: 8

[code]....

View 1 Replies View Related

Programming :: Thread Scheduling And Signalling

Mar 23, 2010

I have a program which is uses sigaction to register for a SIGIO signal (for incoming data on a fd) with an appropriate event handler. I also create a new detached thread 'B' that does some work with the received data. Normally the thread B runs properly. But when my event handler is called (because a there is new incoming data), after the event is handled, the thread B is not called immediately. There is a noticeable delay of the order of many seconds before it is scheduled again .During this delay, my program is doing nothing.

What am i doing wrong? Is there someway i can run thread B as soon as the event is handled (and assuming no other work is to be carried out)?

View 3 Replies View Related

Programming :: Close The Thread Externally?

Aug 11, 2010

i created one thread in main(). I have while in thread function.

I want close the thread in main after some time. How can i close it.

View 4 Replies View Related

Programming :: How To Make Thread Nicer?

Feb 16, 2010

Kernel: 2.6.24.2
System: Embedded System

I have a process and two threads running in it. Thread1 is my GUI-Thread (using FLTK) and Thread2 is running at the first 10 sec. after start.Now, I would like to make Thread2 "nicer" to Thread1, because otherwise GUI stucks sometimes. But I didn't find a solution.Is it possible to define the "niceness" of threads inside a process (to each other)? And if so, how do I have to do this?

View 2 Replies View Related

Programming :: Passing Data To A New Thread?

Feb 11, 2011

I have to launch a new thread from my existing main program and pass data to it.
For now the data is simply a string value.

How I go about passing data to a new thread while it is running.

View 5 Replies View Related

Programming :: Thread Stack Using Pthread_attr_setstackaddr()?

Sep 22, 2010

When I set the stack base address of the child thread using the POSIX library function "pthread_attr_setstackaddr()", I am unable to access the memory contents of its parent. The data-structures that are created on the HEAP of its parent using malloc() are either getting destroyed or unaccessible when moving to the context of the child thread. These data-structures are being passed as an argument to the child thread.Even if I make these variables global then also it is not working.pthread_attr_setstacksize(tattr, ...);stackbase = (void *) malloc(...);pthread_attr_setstackaddr(tattr, stackbase);But when I create the child thread without setting its stack base address using that pthread_attr_setstackaddr(), then it is able to access the parent's memory contents.

View 1 Replies View Related

Programming :: Get List Of Thread In Running Process?

Jan 27, 2010

How to get list of threads of a process using C code in Linux?

View 6 Replies View Related

Programming :: Counting Context Switches On Thread?

Jun 10, 2010

I have done some searching around the internet and this site, but I haven't found a good way to count the context switches on a thread in a c++ program I am running. I need to know if it get swapped off of a CPU for correct timing.

View 4 Replies View Related

Programming :: Which Is Scheduling Algorithm Which Will Make Thread O?

May 4, 2011

I have a timer thread, and when it expires, it sets a flag. The only problem is, if any higher priority thread comes in between, then the timer is not expired in real time.Thus i want to set a highest priority to my thread. Now, i know 2 algos, which can make my thread in real time are: SCHED_FIFO and SCHED_RR.

So, here are my queries: 1) Which scheduling algo is best suited for this purpose? 2) Is it guaranted to work in real time if i use that algo (you suggest in 1) and set the max_priority by getting the maximum settable priority for that particular algorithm using, int sched_get_priority_max(int policy);

View 2 Replies View Related

Programming :: Change Priority When Creating New Thread?

Feb 21, 2010

I have created an error logger thread in my application using pthread_create(), I want this thread to have a lower priority than my application's priority so that the application would run properly. Is there an easy way to do this? I know that we can change priority for thread created with policies FIFO or RR, since I don't set the policy for my application, I don't know what to set for my thread.

View 4 Replies View Related

Programming :: Suspend/resume A Thread When Using Pthread.h?

Dec 14, 2010

I want to suspend/resume a thread. The library I am using is pthread.h.I am also running my application on linux.Is there any function in pthread. let me suspend a thread temporary?I have read a document in which it was mentioned thatthread does not support suspend/resume

View 4 Replies View Related

Programming :: Increasing Thread Stack Size?

Jan 23, 2011

I seem to only be able to set my stack size on my linux server to 15000. If I increase it to 20000 I get a Segmentation Fault. how I can get the linux OS to increase the stack size? Code: threadRet |= pthread_attr_setstacksize( &m_ThreadAttributes, 15000 );

View 8 Replies View Related

Programming :: Is Popen Thread Safe Via Pthreads?

Sep 17, 2010

I don't seem to find a conclusive answer to this one...."Is popen thread safe via pthreads?"

View 2 Replies View Related

Programming :: Need To Find Appropriate Thread Scheduling And Priority

Sep 9, 2009

I am new to thread programming. I need to generate one thread in one process using posix thread. Which scheduling and priority do i need to use? I want to generate the thread with the lowest priority. As i know there are 3 scheduling policy available SCHED_FIFO, SCHED_RR or SCHED_OTHAR.

View 1 Replies View Related

Programming :: Passing An Object To A Running Thread?

Jan 14, 2011

This is a client server issue where the server creates a new thread for listening to a new client, now when the thread starts execution and during its execution the server needs to pass it an object of some X class, how's that to be done?

View 4 Replies View Related

Programming :: Passing Array To Thread Function?

Aug 12, 2010

I am trying to pass an array to thread program. Its printing the val[0] value but its not printing value at val[1]. Can somebody help me with this problem.

Code:
#include <unistd.h>
#include <stdlib.h>

[code]....

View 4 Replies View Related

Programming :: Posting A Better Solution To A Closed Thread?

Jul 27, 2010

Rather than get in hot (or even slightly-above-comfortable temperature) water for reviving a closed (ca. 2007) thread without moderator permission or acquaintance of the OP personally or by proxy, I'll post this alternate solution (approach?) along with one positive real-world example illustrating how mine is easier to write and is equally reliable, if not altogether better. The thread is here. Their solution:

Code:
if [ "$myfilesize" eq "0" ];then echo "$file: the file size is zero"; else echo "$file: the file size is NOT zero"; fi (and this hangs on the output of a stat -c %s command). "Hangs" is probably a most appropriate word. The two outputs, using two different stat options, the same file, and three marginally-different command-line syntaxes I just tried gave me these: First, using their approach, I got this:

Code:
tjsfa070929-094.jpg.error: the file size is NOT zero
Even though stat gave me this
Code:
>> stat -c %s $file

[Code]...

From where I sit, getting the file type string instead of an integer, which can be equally (if not often more) accurate, makes for an easier time of setting the conditional and, maybe only in terms of a few ticks, a faster script from start to finish. I think my method is better, and proven so to the limits of my knowledge and ability here in this OP.

View 1 Replies View Related

Programming :: Where To Get Source Code Of Quick Thread?

Mar 25, 2011

Where can I get the source code of quick thread?

View 1 Replies View Related

Programming :: Prevent Process Crashing On Thread Crash?

Mar 24, 2011

I want to know, is there any way to prevent the multi-thread process from crashing if some errors (say, segmentation faults) occur in one of its child threads? I've found pthread_sigmask() function, but that does not seem to work:

Code:
#include <stdio.h>
#include <unistd.h>

[code]...

View 3 Replies View Related

Programming :: SDL TTF_Render.... Functions Not Work Under Thread Function?

Sep 6, 2010

I'm making a programm under OpenSuse 11.1I'm using SDL and ofcourse SDL_TTF.when i render with the SDL's TTF function under main(), i have no problems, but when i render under thread i have segmentation fault.There is not exist any typing or any competition (i'm using semaphores) but even if i try to render on a local SDL_Surface i'm having the Segmentation fault...

View 2 Replies View Related

Programming :: Python's Thread & Fork Support Is Compared To Perl?

Mar 24, 2011

I'm wondering how python's thread & fork support is compared to perl? Which one is best option among Perl and Python

View 1 Replies View Related

Programming :: C - One Value In The Matrix Drops To Zero When Passed In As Pointer?

Dec 8, 2010

This is one of the strangest problems I've run into while programming. Maybe there's just something wrong with my version of gcc or something.

The main problem comes at this point in the code:

Code:
po = makePoFromScorbotXYZPR(X, Y, Z, P, R);
h = makeHB2GFromPo(po);
printf("%le", *h[1][0]); //##################################### Here it has the right value
printf("%s", "

[Code].....

View 2 Replies View Related

Programming :: Why The Thread Stack Size Cannot Be Changed When Calling In A Dynamic Library

Jan 5, 2011

Why the thread stack size can not be changed after calling pthread_attr_setstacksize & pthread_create in a dynamic library? Detail: I write a file thread_factory.c and plan to build it and produce a dynamic library (libthread_factory.so) In the thread_factory.c , there is a routine

[Code]....

And after this, there is application, it will call fct_thread_create(STACK_SIZE_256KB), and then call pthread_attr_getstacksize(), but the stack size return always be a fixed value 0xa01000. (I tried this on Fedora12) But if I build the application source code with the file thread_factory.c directly, the stack size return is right as my expect. I checked the source code of glibc about the routine pthread_create() as below:

[Code]....

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved