I have to launch a new thread from my existing main program and pass data to it.
For now the data is simply a string value.
How I go about passing data to a new thread while it is running.
This is a client server issue where the server creates a new thread for listening to a new client, now when the thread starts execution and during its execution the server needs to pass it an object of some X class, how's that to be done?
View 4 Replies View RelatedI am trying to pass an array to thread program. Its printing the val[0] value but its not printing value at val[1]. Can somebody help me with this problem.
Code:
#include <unistd.h>
#include <stdlib.h>
[code]....
I'm trying to work out the best way to achieve the following.
1)php page that grabs data from a local database. (not a problem)
2)It then needs to send this data to a c program/service running on a remote server. (I probably need it to be able to handle 4+ million reocrds in an array)
3) The c service then needs to process the data and send it back to the initial php script that called it. i was hoping this could be in a an array like structure of some kind. 4)update the db with the results.
I was thinking of using gsoap to write a simple c soap service that php can communicate with. Would this be the right way of doing this or would something like sockets in php be a better way of sending this volume of data as an array or struct to linux c socket if thats even possible.
I am going to use "pthread_setaffinity_np" to bind a thread to a specific core. My application has two threads. I have used mutex to assign a specific id to each thread and then bind that thread to a core different from another core. but it seems that the os assigns both thread to one core.What should I do to bind each thread to a specific core?
View 4 Replies View RelatedI am developing a I2C CDROM client driver. The CDROM firmware supports TOC information read through a I2C command. It sends the TOC information in burst ( Interrupts a GPIO pin when it is ready ) and my CPU does a I2C read to read the TOC. When the CDROM firmware finishes sending the last data burst , it informs my CPU that it is done with the TOC, by a flag in the last data burst. I would like to know, which is the most efficinet way I can send these TOC information to userspace?
View 4 Replies View RelatedI am doing some Linux kernel programming for my research project. I need to record the timestamp (by using cpuid and rdtsc) when an interrupt handler (top half) is first invoked. Due to the time critical nature of the problem itself, I have to do the timestamping inside the interrupt handler itself (the first operation when the handler is called). However, I understand that tasks that are not so time critical should be deferred to a tasklet function (bottom half) for processing because other interrupts are disabled in a (top-half) interrupt handler. I am currently out of idea on how I can pass the timestamp information that I have obtained in the interrupt handler to the corresponding tasklet function.
View 2 Replies View RelatedA simple TCP based chat server could allow users to use any TCP client (telnet, for example) to communicate with each other. For this question you should consider a single process, single thread server that can support exactly 2 clients at once, the server simply forwards whatever is sent from one client to the other (in both directions). Your server must not insist on any specific ordering of messages as soon as something is sent from one client it is immediately forwarded to the other client. As soon as either client terminates the connection the server can exit
View 4 Replies View RelatedWhat is the quickest way to get the thread id(tid) of the current thread in linux? Specifically I use fedora 13. ...and I am talking about inside a C++ program.
View 2 Replies View RelatedIs there a library/system call that will return to me what CPU core a thread of execution is running on? I've looked for a bit on the net already and also in /usr/include and couldn't find one.
getcpu() and sched_getcpu() are two that I found, but when I include the appropriate header files (linux/getcpu.h, and sys/sched.h respectively), gcc says getcpu.h doesn't exist and the linker complains it cannot find the implementation in sched.h.
I'm sure I'm doing something really stupid or overthinking...
What I am doing is running an OpenMP application and specifying a list of cpu cores to run on with GOMP_CPU_AFFINITY. I want to make sure that each core is getting the same number of threads.
**UPDATE**
It seems that this code works, but only with glibc >= 2.6, and my machine has 2.5:
Code:
#define _GNU_SOURCE
#include <stdio.h>
#include <utmpx.h>
int main( void )
[Code].....
I have a program which is uses sigaction to register for a SIGIO signal (for incoming data on a fd) with an appropriate event handler. I also create a new detached thread 'B' that does some work with the received data. Normally the thread B runs properly. But when my event handler is called (because a there is new incoming data), after the event is handled, the thread B is not called immediately. There is a noticeable delay of the order of many seconds before it is scheduled again .During this delay, my program is doing nothing.
What am i doing wrong? Is there someway i can run thread B as soon as the event is handled (and assuming no other work is to be carried out)?
i created one thread in main(). I have while in thread function.
I want close the thread in main after some time. How can i close it.
Kernel: 2.6.24.2
System: Embedded System
I have a process and two threads running in it. Thread1 is my GUI-Thread (using FLTK) and Thread2 is running at the first 10 sec. after start.Now, I would like to make Thread2 "nicer" to Thread1, because otherwise GUI stucks sometimes. But I didn't find a solution.Is it possible to define the "niceness" of threads inside a process (to each other)? And if so, how do I have to do this?
When I set the stack base address of the child thread using the POSIX library function "pthread_attr_setstackaddr()", I am unable to access the memory contents of its parent. The data-structures that are created on the HEAP of its parent using malloc() are either getting destroyed or unaccessible when moving to the context of the child thread. These data-structures are being passed as an argument to the child thread.Even if I make these variables global then also it is not working.pthread_attr_setstacksize(tattr, ...);stackbase = (void *) malloc(...);pthread_attr_setstackaddr(tattr, stackbase);But when I create the child thread without setting its stack base address using that pthread_attr_setstackaddr(), then it is able to access the parent's memory contents.
View 1 Replies View RelatedI'm struggling with the issue of passing a vector of a class to itself, here's what state its in now... (tried many variations, but without direction).
Code:
#include <iostream>
#include <string>
[code]...
How to get list of threads of a process using C code in Linux?
View 6 Replies View RelatedI have done some searching around the internet and this site, but I haven't found a good way to count the context switches on a thread in a c++ program I am running. I need to know if it get swapped off of a CPU for correct timing.
View 4 Replies View RelatedI have a timer thread, and when it expires, it sets a flag. The only problem is, if any higher priority thread comes in between, then the timer is not expired in real time.Thus i want to set a highest priority to my thread. Now, i know 2 algos, which can make my thread in real time are: SCHED_FIFO and SCHED_RR.
So, here are my queries: 1) Which scheduling algo is best suited for this purpose? 2) Is it guaranted to work in real time if i use that algo (you suggest in 1) and set the max_priority by getting the maximum settable priority for that particular algorithm using, int sched_get_priority_max(int policy);
I have created an error logger thread in my application using pthread_create(), I want this thread to have a lower priority than my application's priority so that the application would run properly. Is there an easy way to do this? I know that we can change priority for thread created with policies FIFO or RR, since I don't set the policy for my application, I don't know what to set for my thread.
View 4 Replies View RelatedI want to suspend/resume a thread. The library I am using is pthread.h.I am also running my application on linux.Is there any function in pthread. let me suspend a thread temporary?I have read a document in which it was mentioned thatthread does not support suspend/resume
View 4 Replies View RelatedI seem to only be able to set my stack size on my linux server to 15000. If I increase it to 20000 I get a Segmentation Fault. how I can get the linux OS to increase the stack size? Code: threadRet |= pthread_attr_setstacksize( &m_ThreadAttributes, 15000 );
View 8 Replies View RelatedI don't seem to find a conclusive answer to this one...."Is popen thread safe via pthreads?"
View 2 Replies View RelatedI am new to thread programming. I need to generate one thread in one process using posix thread. Which scheduling and priority do i need to use? I want to generate the thread with the lowest priority. As i know there are 3 scheduling policy available SCHED_FIFO, SCHED_RR or SCHED_OTHAR.
View 1 Replies View RelatedRather than get in hot (or even slightly-above-comfortable temperature) water for reviving a closed (ca. 2007) thread without moderator permission or acquaintance of the OP personally or by proxy, I'll post this alternate solution (approach?) along with one positive real-world example illustrating how mine is easier to write and is equally reliable, if not altogether better. The thread is here. Their solution:
Code:
if [ "$myfilesize" eq "0" ];then echo "$file: the file size is zero"; else echo "$file: the file size is NOT zero"; fi (and this hangs on the output of a stat -c %s command). "Hangs" is probably a most appropriate word. The two outputs, using two different stat options, the same file, and three marginally-different command-line syntaxes I just tried gave me these: First, using their approach, I got this:
Code:
tjsfa070929-094.jpg.error: the file size is NOT zero
Even though stat gave me this
Code:
>> stat -c %s $file
[Code]...
From where I sit, getting the file type string instead of an integer, which can be equally (if not often more) accurate, makes for an easier time of setting the conditional and, maybe only in terms of a few ticks, a faster script from start to finish. I think my method is better, and proven so to the limits of my knowledge and ability here in this OP.
I hope someone can help me with this. I need to call the same thread multiple times, but only run one thread at a time. So what I do is create the thread which runs then drops out. Run the main loop and after some time pthread_create the same thread again. So in pseudo code
[Code]...
I always presumed if I run a thread and it reaches with a pthread_exit, then the thread was destroyed? However I've found that after I've created the thread several 100 times the programme crashes? So can anyone advise how I call the same thread over and over?
Where can I get the source code of quick thread?
View 1 Replies View Relatedi'm programming a small tcp client, but i need that the server knows the source ip. My client receives a external connection and forwards, but the ip seen by the server, of course, is the client ip. I would like, change this ip to original source ip.
I don't know how to do this. I tried with the connect and select function.
I have a file with around 1000 IP addresses in it and I need to be able to ssh into each one of them, run a single command, and then exit. I already know the ssh command I want to run and it looks like this:
Code:
shpass -p [password] ssh -p 10022 -o StrictHostKeyChecking=no root@[ip variable] 'reboot'
(I know shpass is not good to use and keys are the correct way but I don't have any other options in this scenario.) if these ip addresses were in a .csv file, by themselves with no other information, how would I create a script to do the above command to each ip until the end of the file?
If I have the following links in HTML
Code:
<a href=lang.php?lang=cymraeg>Cymraeg</a>
<a href=lang.php?lang=english>English</a>
and lang.php has a link to page2.html, how do I pass on the value of the lang parameter from lang.php to page2.html? The value needed is the one passed in to lang.php.
Below I've presented the declaration, definition and the calling method of a function w.r.t pass by reference:
Declaration
Code:
void getUnpackedMsg (unsigned char &data, unsigned int numberOfBits);
Definition
line 278: Shown in RED
Code:
void packedMessage :: getUnpackedMsg (unsigned char &emptyArray, unsigned int numberOfBits)
{
...
...
printf ("
[code].....