Does anyoe have any example c/c++ code that is used to parse type-length-value messages.
The only decent article I can find on the web is:
http://en.wikipedia.org/wiki/Type-length-value
Bur it does not give any examples of parsing etc..
I would like to extract Room number, Lastname,Firstname,invoice (205880080),arrival date, departure date, and total(229.46). Can you at least give me a hint on how to proceed? I have tried a lot but I am stumped from the beginning.
***History***
Room: 124 B Payment: Bell/TRAVELSCAPE.COM
Lastname*FIT*,Firstname 4A, 0K, 0B Guest
Bell *205880080 FT
Bell *205880080 July 31, 2010
[Code]...
I am novice. I am trying to create one email form. But i am getting "Parse error: parse error in F:estwampwwwsendmail.php on line 43"
Code:
<?php
if(isset($_POST['email'])) {
[code]....
I am playing around with a new chat program and I have errors that I can not figure out. Here is what I am getting.
parse.c:1638: error: dereferencing pointer to incomplete type
parse.c:1638: error: dereferencing pointer to incomplete type
parse.c:1638: error: dereferencing pointer to incomplete type
here is the code:
if (scan->jail_timeout == 0 && scan->location == prison)
{
command_type |= HIGHLIGHT;
tell_player(scan, " After serving your sentence you are flung out"
[code]....
I have a thread started on the Slackware forum about the possibility of installing Slackware on an older P4 laptop. Well, it installed fine and most things are working, but I am experiencing one problem that I need to solve before I progress to working on other things.
I hope the mods will not consider this a double thread because it is a networking issue and the other thread was started about a different subject, and I thought there might be more networking specialists there (though everyone I meet on the Slack forum is very knowledgeable, this one has not been solved.)
I am trying to connect wireless with an RT2500 chipset, the correct module loads and the machine is connected to the network, but with a "failed" IP address (169.254.167.101). This also occurs with a wired connection. The exact error is:
Code:
err, wlan0: option 43 has zero length
failed to parse packet
It times out then assigns the failed IP address and connects to the network, but of course nothing works.
I use WPA psk and I have another laptop with the same configs and works perfectly with Slackware -current, so I followed the same routine to set this one up. When that didn't work, I backed up the existed /etc/rc.d/rc.inet1 and wpa_supplicant.conf, and copied the working files to the new setup. Same result.
There does not seem to be any information about this error either here on LQ, or on the net. I have certainly never encountered it before.
Because it connects with good signal strength, and because it also occurs with wired connections, I can only assume that it is related to WPA in some way. I have not reset the router because I have a number of other machines connected. All of the other machines work, and this one connects, so it is not hardware related.
For the following compilation warning message I need to create some sample program in C for self study. Also I am looking for some good web link where all the C warnings are described.
1. Warning #47: incompatible redefinition of macro "entity" . Undefine macro before
2. Warning #167: argument of type is incompatible with parameter of type
3. Warning #175: subscript out of range
[code]....
Is there an online resource to lookup error messages generated when compiling C++ code?
View 5 Replies View RelatedI'm a C / assembler programmer so am not use to C++, which I need to use. Basically I'm using my own versions of memcpy, but for long and int rather than char. It's for fast graphics. So I have a char array which I copy to another array. But I copy as either longs or ints, much faster. for example
Code:
void * fastmemcpysprite (void *destaddr, void const *srcaddr, size_t len)
{
[code]...
Parse error: syntax error, unexpected '@' in C:xampphtdocsminippromail.php on line 8 .......its not recognizing the '@' symbol. heres the code im working with
<?php $receiver = myfriend@ourmail.co.in; $subject = wish; $content = Hi! My dear friend how are you.; $sender = myself@ ourmail.co.in ; $headers = From: $sender; mail($receiver,$subject, $content,$headers); echo Mail has been sent successfully.; ?>
I was wondering if there is anyone who has some kind of a small script/code (preferably in C/C++) which reads a partition and just displays the type. For example, the script/code would be called partype and should be something like this: partype /dev/sda1, will read sda1 and display for example ext4, because sda1 was formated as ext4.
Note: I'm not a developer so I have no idea how this should be done, plus I would like the script/code to do it by itself the checking, without using fdisk/sfdisk/cfdisk/parted/gparted, because none of this apps work quite well when it comes to the partition type or file system type.
I have a syslog-ng running and kernel build of 2.6.34.8 I use a syslog API in my program with facility LOG_LOCAL5 and and levels debug err and crit and info. when I ran on the older syslog facility I had everything logged fine as I intended. now I have written these rules into the syslog-ng.conf:
options {
flush_lines (0);
time_reopen (10);
log_fifo_size (1000);
[code]....
the last two rules show my program gnssapp. the result is all debug levels or crit or err levels I don't see any of them !
I'm trying to compile a program and it gives me the following:
I checked cmath-util.h:46 and cmath-util.h:48:
I'm not a C person, and the author is unavailable so far.
I would like to know how can I find array length in C .I have array of structure and I want to sent it to different functions and I want to have it's length (number of elements) each time I want to use it and I don't like to use any additional variable to pass the function for each of arrays that I pass to function.
How can I do that?
I want to calculate length of my array, say Unix here.
Code:
[linux1@HMLINUX1 abc]$ declare -a Unix=('Debian' 'Red Hat' 'Suse' 'Fedora');
[linux1@HMLINUX1 abc]$
[linux1@HMLINUX1 abc]$ echo ${#Unix[@]}
5
This should be ideally 4, but somehow it is showing as 5. However, when I am removing the space as RedHat instead of Red Hat, it is working perfectly.
Code:
[linux1@HMLINUX1 abc]$ declare -a Unix=('Debian' 'Redhat' 'Suse' 'Fedora');
[linux1@HMLINUX1 abc]$ echo ${#names[@]}
4
I am using ubuntu remix 10.04 on Dell mini 12 notebook. Everything is perfect expect coding in Eclipse. If any code tips window pops up, then I can't type in any letter until I click right mouse button or [Alt + Tab] to other window and switch back
View 2 Replies View RelatedAnyone know why Linux has to share a partition type code (specifically, 0700) with Windows? Why can't it have its own like some other OSes?
View 4 Replies View RelatedI need to rewrite the selenium java code into its equivalent php code.
View 5 Replies View Relatedwhat is the best command to use to parse strings?I have a variable $str and need to parse this string.Can you provide an example of the command used to get a substring of $str based on the index values of start and end
View 3 Replies View RelatedHow to let awk consider a string by double quota as one field? for example:
echo "first "second is a string"" | awk '{ print $2 }'
I want to print out "second is a string".
I got this xml
...
<other stuff="etc">...</other>
<cluster id="1">
<host ipaddress="192.168.50.1" name="server1">
<host ipaddress="192.168.50.2" name="server2">
<host ipaddress="192.168.50.3" name="server3">
</cluster>
...
how would i get the ip addresses only using bash.
My php knowledge is very poor (only worked with strings so far), and I am faced which a task that is a real challenge for me: I have a variable, that contains data of different type, in this order: byte, byte, string, string, string, string, short, byte, byte, byte, byte, byte, byte, byte, string.
Strings are of variable length. How could this data be parsed into variables of the right type, and then all converted to strings? What are the functions to use? Strings are unicode ones, and they are delimited by "
in gcc how to read a blank line ie a string of length 0.my code:
Code:
#include<stdio.h>
#include<string.h>
[code]...
I've written a usb device driver and a program that sends and receives data over the bulk pipe. The read function sometimes returnsI'm reading an unknown amount of data. However, using a usb tracker I can see that the correct data is being sent.The error only occurs sometimes.I expect that the read function is told to read more data that it receives it would fail and return -1, however if this was the case then every read call would fail.
View 4 Replies View RelatedI have to parse a file containing billions of records and populate them in the Data structure. I have used a lot of C++ class and creating objects of the class I am storing the information retrieved by parsing the file.
Now as the file become huge and number of objects become very large my code is getting bad_alloc error as it is not finding any space avalable in the heap for allocating new object.
Is there any way to parse the file?
I'm currently curios with my python program which the basic goal is to parse the character in mytestfile;let's see the code
Code:
f=open('/home/andrewraharjo/Desktop/snort.log','r')
j=f.read()
[code]...
To run a parallel chemistry program, I need to build the host list. The cluster already has SGE(grid engine) installed and it generates a host list file with the following contents:
compute-1-1.local 2 all.q@compute-1-1.local UNDEFINED
compute-2-1.local 2 all.q@compute-1-1.local UNDEFINED
The important bits are hostname(ex compute-1-1) and number of cpus to use(ex 2). And for this program, it wants them in this form, a shell variable: HOSTLIST=hostname:cpus=X hostname:cpus=X .... I've tried this script, but it doesn't work
Code:
#!/bin/bash
spacer=":cpus="
let count=0
[code]....
I have a basic HTML file set up which allows my to input some data. I have a MySql database set up behind the scenes with a table for this information to go in. When I click the submit button in my HTML file this PHP file opens and it comes up with "Parse error: parse error in C:wampwwwcomp39xinsert_student.php on line 32"Here is my code I am using in the PHP file:-
<html>
<head>
<title>COMP 39x FInal Year Project - Student Added?</title>
[code]....
I need to read a file and parse a string. I know in Perl there is the split command. Is there something similar to that in C++?
View 6 Replies View RelatedI'm programming some skript to get statistical information about some texts. This includes calculating the mean of word lengths.Unfortunately, Umlauts count as two characters. In the example below the output is 9, it should be 6.
sincercly, Max
Code:
#!/usr/bin/perl
use POSIX;
use locale;
my $test = length("ABC���");
print $test;
I'm working on an application that makes http requests using HttpRequest and it's been doing what I need so far without a problem. Now I need to make https requests as well and when I try to make the request, i get this error message:
Code:
Fatal error: Uncaught exception 'HttpInvalidParamException' with message 'Empty or too short HTTP message: ''' in /home/antoranz/waneesia/html/index.php:0 inner exception 'HttpRequestException' with message 'SSL connect error; gnutls_handshake() failed: A TLS packet with unexpected length was received. (https://www.paypal.com/)' in /home/antoranz/waneesia/html/index.php:104 Stack trace: #0 /home/antoranz/waneesia/html/index.php(0): HttpRequest->send() #1 {main} thrown in /home/antoranz/waneesia/html/index.php on line 0
What's going on?
The project: url
