I want to calculate log in bash script. I searched but could not find any bash command to directly do it. I am also thinking to send the variable in C program, calculate in C and get the answer back in bash script.But I think it is a long process. as I have to do this
i) gcc -o log log.c
ii) ./log > log_result.txt
iii) then read the result from log_result.txt
i have a sorted file with many repeated lines like this:
1ujw
1ujw
1ul1
1us7
[code].....
i need to calculated haw many times each line is repeated, for ex
1ujw 2
1ul1 1
1us7 5
etc.
can we find logarithm to base 10 instead of base 2 on shell script??i can do it with bc..like 'l(1000)/l(10)' | bc -l
View 1 Replies View Relateddoes anyone know how to calculate an average in a simple way with bash? I've got something like this:
Code:
$ cat results.txt | head -10 | tr " " " " | cut -f13
0.23929285124
0.404716908011
0.35113102608
[Code]....
and now I want to calculate the average of the resulting numbers. I know I could write a bash or awk or perl script and use that, but isn't there a more simple, elegant way? There is for example "sum" in the coreutils, but no "avg"..
I would like to subtract the end time with a start time in bash. How can I do it?
Here's a script of example of what I want:
I want to calculate length of my array, say Unix here.
Code:
[linux1@HMLINUX1 abc]$ declare -a Unix=('Debian' 'Red Hat' 'Suse' 'Fedora');
[linux1@HMLINUX1 abc]$
[linux1@HMLINUX1 abc]$ echo ${#Unix[@]}
5
This should be ideally 4, but somehow it is showing as 5. However, when I am removing the space as RedHat instead of Red Hat, it is working perfectly.
Code:
[linux1@HMLINUX1 abc]$ declare -a Unix=('Debian' 'Redhat' 'Suse' 'Fedora');
[linux1@HMLINUX1 abc]$ echo ${#names[@]}
4
i've been using a awk script to calculate my data... i have 3 files:
file a1.txt:
2
3
4
[code]....
the results were (3.5, 6 and 3) which is pretty easy.. now i want to combine all this into 1 file and each have different columns and called it avg.txt which have something like this in the end:
3.5 6 3
im trying to calculate how much time does my program run, use very simple script
clock_t end, start;
start= clock();
int i;
printf("initial %d
",(int)start);
[Code]....
but it outputs 0 all the time. cant figure out where could be the problem.
i have the example code below, i want to calculate the time taken for a sample program to run. but i keep getting undefined reference error.
#include <sys/time.h>
#include <iostream>
int main(int argc, char **argv) {
struct timeval startTime;
struct timeval endTime;
[Code]...
i'm trying to write a program with c socket programming,what i am trying to reach is a program which will calculate a computer's downloaded data from the internet,just to know how much he/she download?
View 1 Replies View RelatedE.g. 98 is represented as 1100010 (number of valid bits is 7)
What is the formula to calculate the number of valid bits in a byte ?
ı need to calculate how many nanosecond the process takes . must give the same value every time (c++) ubuntu 10.10 my system information:
*-cpu
description: CPU
product: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz
vendor: Intel Corp.
physical id: 400
[code]...
I'm using pyqt3 for my app and am lost on even how to attempt this task... On a vinyl cutter to have the blade pivot it must be offset from the center of the shaft it's on so say for example a .25mm offset would leave a .25mm unwanted vinyl attachment when the cutting is done. I somehow have to average or extrapolate that .25mm xy coordinate and add it to the hpgl plot file as a PUx,y; command? I have enclosed a simple sample file that has three images in it. In the corresponding hpgl file everything between the PU commands that are starting with PD are the code for that image (star for eg the pu to move to next image and then all PD for the next image and so on, so once the formula or procedure is figured out it can be applied to as many images there are in the file. Placing the new command at the head of each image PD group. Since there are absolute and relative cutters I enclosed the same exact plot for both types as the coordinates on relative can be negative numbers. Only PU and PD commands and a ";" as a command delimiter as sometimes many commands are on one line.The offset variable will come from a spinbox but .25 is good for an example.
View 14 Replies View RelatedIm doing a sudoku-solver as a school assigment in Java. It is supposed to solve both 6x6, 9x9 and 12x12 boards.Im pretty much done with my algorithm(brute force), but I'm having a hard time figuring out how to calculate the right Box for a Square. I found this snippet:
Code:
// calculate BoardPos for index, where index is 0..80
void loadBoardPosFromIndex(BoardPos &pos, int index) {
pos.index = index;
[code]...
This works on 9x9 boards, but I really dont get the math behind this, and how I can create a generic rule for both 6x6, 9x9 and 12x12 boards.
i need to calculate the number of words containing letter e in a textfile.
View 9 Replies View RelatedI'm trying to write a script that will calculate a directory size and if the size is greater than 4GB, it will send out an email. But I am getting the "integer operation expected" error when it tries to calculate the current disk size. Here's my script.
Code:
TO="user@email.com"
SUBJ="Ready for DVD burning on `hostname`"
MAIL="/bin/mail"
[code]....
how to calculate (if possible) the end address of an image file in a flash memory. I'm trying to create a checksum and checkheader function and the info that I got is the file's offset, how many sector it consumes and its size. I kinda need the end address, sad thing is, I don't know how to calculate it.test.img's start address is 0, the size is 0x20000 and consumes 3 sectors.
View 6 Replies View RelatedI'm trying to calculate the minutes difference between two dates using the function mktime() on c++. The dates will be passed to me as struct tm, and I will use this function many many times. The example below shows what I wanna do:
Code:
int main(int argc, char** argv) {
while (1) {
tm date2;
tm date1;
[code]...
I read the mktime() description on c++ reference, searched google... but there is no light
I am trying to write a script to calculate the total amount of installed memory to use during an anaconda kickscript, so the swap file is created at 2 x the installed memory. I so far have the amount of installed RAM DIMMS but need a way to total them up and produce a varible I can use in the pre section of the install.
Code:
dmidecode -t 17 | grep Size | awk ' { print $2 }'
Output:
2048
2048
Note: on some servers there could be from 1 DIMM up to 16 DIMMS installed so the script needs to be able to handle this. I also can not use bc as it does not exist during the install stage. I am guessing I need a while loop to do this and use expr but do not know where to start for this logic.
I would like to know how do I print the line # in a script. My requirement is, I have a script which is about ~5000 lines long. If there are any errors happen I just exit. And I would like to add the line # of the script where the error happened.
View 3 Replies View Relatedsimple bash code:
Code:
#!/bin/bash
trap "echo 'you got me'" SIGINT SIGTERM # to trap ctrl+c
echo "Press ctrl+c during 5 sec loop"
for ((i=0;i<5;i++)); do
[Code]...
How come code behaves normally and stops when ctrl+c signal is caught and resumes, but after I use at least one timeout read in the code it looks like, if signal is caught again it doesn't pause the execution but skips the loop. If you remove -t (timeout) option from the read, both loops look the same!
I have a config file that contains:
my.config:
Code:
Now in my bash script, I want to get the output /home/user instead of $HOME once read. So far, I have managed to get the $HOME variable but I can't get it to echo the variable. All I get is the output $HOME.
Here is my parse_cmd script:
Code:
I have written quite a few separate bash & scripts and php scripts that up to now I have run from cron jobs. However I have to estimate how long each takes to run, before running the next and so it probably takes much longer than necessary to run them all. They have to run in order.
Now there are so many I am thinking it would be better to have a master bash script that would run one after the other, but I am not sure how to get the master script to wait before starting to run the next script. Is this possible and is there a command that will make the script wait between bash and php scripts , for them to finish, before running the next?
I would like to get the filename (without extension) and the extension separately. The best solution I found so far is:
Let FILE="thefilenameofsomefilesfor_instance.txt"
Code:
NAME=`echo "$FILE" | cut -d'.' -f1`
EXTENSION=`echo "$FILE" | cut -d'.' -f2`
I think it would be better to count the len and remove 3 chars to right to get the extension, but it can be macintosh filenames with have 4 chars for extensions.
I need to rename the resulted searched files from a loopI have the following code:
find . -name DOC* | while read i
do
find $i -type f -name '*.txt'
done
basically, I am searching for all txt files inside any folder starting with DOC name.this code is working fine with me.I need to rename those .txt files to .txtOLDOS: Ubuntu 10.4Bash shell
I am trying to write a bash script that sources another bash script. Essentially, I need a few lines to check to see if a certain variable is set. If not, I set it manually, and then source a scripts with that variable in the path. I wrote a test script to try it, but for some reason the last line does not work. Here is what I wrote:
#!/bin/sh
source ~setupdir/setup.shrc #just a test, this line works
echo ${#SETUP} # prints 0 if setup is not set, which it isn't
if [ ${#SETUP} -eq 0 ]
then
SETUP="~setupdir"
fi
echo $SETUP # prints ~setupdir
[Code]...
i'm in the process of learing C++. currently i'm creating shell scripts to get things done. i'm just curious how, as a programmer using C++ you would get a similar job done.as an example i have a script that takes the contents of files, pipes it to some sed and awk commands, which is piped to create a new file. that file is then imported into a mysql database.if you were going to do this in C++, would you call the sed/awk programs to modify the file, or can it be done within the program itself? i'm probably jumping the gun here because i've just started learing about pointers so this is above my ability
View 12 Replies View RelatedI have beat this enough and don't get what should have been a very simple thing to do. I build a variable;
Code:
CLIST=java,lua,python,php,perl,ruby,tcl
CLIST will be used by another bash script but I need to replace the commas with a space. I
[code]...
Creating script that converts hex to dec. But without using bc calculator or other methods that could convert it in one line. I need to make something like this script that converts dec to hex.
View 1 Replies View RelatedI have a basic awk script that can read a file named 'server_info' and output to the screen which fax lines are not working. Now I want to make the script execute commands instead of printing to the screen but I am having trouble... This is better explained by my code below:
test.sh Code: #!/usr/bin/awk -f
#
#The name of this script is test.sh
[code]....