I'm programming some skript to get statistical information about some texts. This includes calculating the mean of word lengths.Unfortunately, Umlauts count as two characters. In the example below the output is 9, it should be 6.
sincercly, Max
Code:
#!/usr/bin/perl
use POSIX;
use locale;
my $test = length("ABC���");
print $test;
I'm porting C++ application from ARM to MIPS platform. It works now, but I see some strange timing problems. I've seen now that My app process is called multiply time. Here is "top" output:
Mem: 24592K used, 102084K free, 0K shrd, 0K buff, 16864K cached
CPU: 0% usr 99% sys 0% nice 0% idle 0% io 0% irq 0% softirq
Load average: 4.02 2.17 0.95
PID PPID USER STAT VSZ %MEM %CPU COMMAND
1888 1875 admin R 12096 10% 98% ./my_app.exe
code....
I don't see something like this when I compile it for x86, nor ARM.On MIPS I use uClibc instead of glibc.
Is it possible to make an AWK script that goes over the file multiple times, every time doing something different to it?
View 19 Replies View RelatedI used wait4 to time a child process. but the results differ each other dramatically. why?my core source code lists as below.to the point: in linux 2.6 kernel, how to time a process with a high precision. and, only its user-time rather than the elapsed time???
static struct rusage ruse;
static pid_t u_pid;
int main(int argc, char *argv[])
{
int i;
code....
I've just installed Ubuntu 10.04 and find that if I leave the machine for more than a couple minutes, it will automatically log me out. Instructions at other sites have indicated that session controls are to be found in System>Properties. But there is no Session in the list under Properties in Ubuntu 10.04. How can I control this feature so that I'm not having to constantly login every time I turn around? I've searched everywhere and can't find a solution.
View 3 Replies View RelatedI have 4 separate drives, all un-RAIDed.Each drive has almost the same root directories, but different contents in each folder.
For example:
/mnt/sda/TV Shows/Lost/
/mnt/sdb/TV Shows/Your_Favorite_Show/
The goal is to have a single folder that has symlinks to all the files in each of the drives. Pretty much a poor man's JBOD. Previously, I had problems with conditions like 2 drives having the same sub folder contents, but I ended up solving that with the current script I'm using now.What I'm looking for now is speed. I'm very new to Perl and the script takes about 12 minutes to complete with the current drives.
Basically, the script makes a list of all directories and files in each drive. First, it makes the directories. I didn't use any validation because if a directory already exists, it simply won't make one. However, with the files, I used a hash to only keep the unique files. Then I use the key/value pairs with ln to create every link to the files only, not directories.
Code:
#!/usr/bin/perl
use warnings;
my @drives_to_sync = qw ( /mnt/sda/ /mnt/sdb/ /mnt/sdc/ /mnt/sdd/);
[code].....
I have a file looks like the following:
digraph topology
{
"192.168.3.254" -> "10.1.1.11"[label="1.000", style=solid];
"192.168.3.254" -> "10.1.1.12"[label="1.000", style=solid];
[code]...
Order of these lines are random... So I cannot delete line #19, for example... And you can see that top four lines I want to delete are pairs. So there might be some clever way to detect the lines, if a line has both "1.9" and "1.11", then delete the line... I am new to perl language. The following is the code I have now... I think I just need to write some code inside the while loop checking if I want to delete the line $dotline before I write to a NEW file.
Code:
#!/usr/bin/perl -w
$TOPPATH = "/tmp";
$NAME = "topology";
$FILENAME = "$TOPPATH/$NAME.dot";
[code]....
I'm looking for a way in Perl to be able to take a list of servers, ssh multiple commands to it and store the results. If I do this process serially, sometimes one server will hang the whole script and if it doesn't, it still takes hours to complete.
I'm thinking what I need to do is make a parent loop that calls out a separate process that passes the server name to the child sub process and then executes all the commands I have defined in its own process. If one server 'hangs', at least that won't stop the script from doing all the other servers in the list.
I'm guessing using the fork() command would serve me best, however, all the online descriptions I have found have been vague at best.
I'm trying to split a text file into various parts. Everything in between "123" and "break" (including linebreaks) goes into the splitted file.
e.g. using this text file:
This should split into 4 files. However I'm only getting 2 files: one for the line "123break" and one for "123 blah break". The two occurrences that contain linebreaks are being ignored. The .* part of my match should capture linebreaks seeing that I'm using the /s modifier shouldn't it? Even when I use the match /(123 break)/gs it still doesn't capture the first occurrence. I'm using Perl v5.12.3 (from ActiveState) on Windows XP. The text file is also in Windows format.
Code listed below.
The above code generates two files Output_1.txt and Output_2.txt which contain "123break" and "123 blah break" respectively. I want it to generate four files.
I have found a perl script that can convert single file: ascii to hex.
However I have thousand of file that I want to convert from ascii to hex.
Here is the perl script that convert single ascii file to hex in single line:
Quote:
So I would like to read multiple file from a directory.
Then the file will be have same name file with hex data.
Here is sample of the read and write directory file.
Quote:
I have written a regular expression (tested in regexpal and regextester alpha something) with which I want to replace something like code...
but it only matches functions which occupy one line only, despite my tests showing multiple line matching in javascript testers online and using the m and s flags (which should make it multi line no?)
Each line of the file I am sorting is in the following format:
<url> <month> <day>
For example:
[URL]
I wrote the following to sort:
Code:
#!/usr/bin/perl
$in = shift;
chomp($in);
[code]....
The script worked fine for my small testing files, but failed in my input file. The input file is 18MB and containing more than 300,000 lines. The output will contains some lines like that:
url_one 10 1
url_two 10 1
url_three 10 3
url_four 10 1
Is that because my file is too big for perl to handle ?
I have a string problem with a function I am writing and I cant figure it out. I am trying to write unit test which will verify it works as expected. As I need to make use of it elsewhere and obviously robust and correct enough that I can rely on it. Okay first of all I define the following structure
Code:
typedef struct strarray {
int size;
char **elements;
} strarray;
code....
My problem is that upon the 4th iteration in the loop realloc fails in strarray_add. glibc reports invalid next size.
I ran into it while google Segmentation Fault. I'm writing a simple C program that reads a file that counts each line and numbers it then writes to a file called sdout. I copyed my program mostly from the text book but im still having problems. Heres my code:
#include <stdio.h>
#include <stdlib.h>
void new_line(FILE *, FILE *);
int main(char *argv)
[Code]....
Some help with this problem:Code:Write a function that counts the number of occurrences of a pair of letters in a string
View 13 Replies View RelatedI have a single file that contain multi-text something likes this:
Quote:
No. Time Source Destination Protocol Info
185 27712.068199 192.168.18.23 192.168.18.191 SMTP S: 250 2.1.5 Ok
No. Time Source Destination Protocol Info
186 27715.068293 192.168.0.50 192.168.5.2 TCP suncacao-jmxmp > 44693 [ACK] Seq=1 Ack=1 Win=64807 Len=1380
[Code].....
I've searched everywhere and I can't come up with a good solution. For each line I need to find the average, min, and max. I've seen plenty of solutions where the number of columns is fixed, unfortunately for me these lines can get pretty large. My thought was to read each line individually into an array, loop through the array and find the avg, min, and max that way but i haven't had much luck. I can read each line using a while loop but I'm having trouble with the array part, or perhaps that's not the best solution?
View 14 Replies View RelatedI have tried multiple times to report a bug, but can't. All I can find is this USELESS guide: [URL]Is this seriously the ONLY way to report a bug? I can't just fill out a form somewhere without running software to do it? When I try to do it the way explained in the guide, it tells me that I'm using a stable version of Xubuntu, and that only people running dev versions (like 11.10) can report bugs.Are they saying that all stable releases are perfect in every way? Surely one must be able to report a bug for them...?
View 5 Replies View RelatedI have a strange effect here, where konqueror is started multiple times. It is no problem to start it from the K-Menu. But konqueror seems to be associated with different actions in applications, e.g. many "help" entries; among others e.g. Inkscape: "Hilfe/Inkscape Handbuch" (~ Help/Inkscape handbook") If I'm unfortunate enough to hit such an item, the konqueror items start flooding my task bar, while the mouse cursor - changed to the konqueror icon - is flickering like wild, while konqueror is starting again and again. None of the windows really open and all icons disappear after some time. (due to some resource overflow, but unfortunately I can't find the relevant log entry this time) How can I prevent this ? (Or debug this, if the cause is unclear)
View 7 Replies View Related[Staff Note: This thread was spun off from here: HOWTO: Purge and Reinstall Grub 2 from the Live CD This solved the Grub problem but the crashes continue.]
Just as I get up and running again my 10.04 (64 bit) either freezes up totally, closes all windows that are open, fails to restart or shut down forcing a restart.
There's no pattern to it, i might be using the gimp or checking thunderbird emails, possibly just surfing or running bluefish. Nothing major and I'm not one to go delving under the bonnet so to speak and start tweaking things. I have the AWN dock installed and run a dual monitor setup.
Everytime it's crashed, the damn thing doesn't reboot, I get the init =bootarg message I've been reading a lot about and once again I have to run the liveCD and spend several minutes farting about purging and reinstalling grub.
I despise Windows, overall I am enjoying my ubuntu experience but things like this stop me getting any work done.
My PC ran fine for the last 2 days then suddenly it's playing up again. It's not an old machine, quad core processor, plenty of RAM.
I am having to back stuff up as soon as I do it due to so many crashes per day. I have reinstalled the OS and started again from scratch 4 times now in the last month.
The last thing I want to do is go back to Windoze but I am seriously running out of patience with ubuntu.
Boot Info Script Results:
Code:
# Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
code....
I have Ubuntu 11.04 on a disk, and installed it on an empty hard drive. When I start my desktop my screen is black with a flashing "_" in the top left corner... Nothing happens. I usually have to restart the computer multiple times before it will actually work. I tried running Ubuntu in recovery mode and fixing any broken packages, but no luck.
View 1 Replies View Relatedhow can I rotate logfiles multiple times a day? I notice that the configuration for the logrotate-command is hourly, daily, weekly,.I notice that I can create a cron job where I specify the different times the log rotation need to be done:15 0,8,12,17 * * *But how do I combine these two ?
View 7 Replies View RelatedMy 5.5 server has crashed on my multiple times over the past few weeks. I have 2 terabyte drives mirrored.It automatically reboots and seems to run fine after rebooting.I've attached a copy of the /var/log/message to this post.I was unable to paste file.I'm not if a bad disk is causing the problem or not.
View 4 Replies View RelatedI would like to know how can I find array length in C .I have array of structure and I want to sent it to different functions and I want to have it's length (number of elements) each time I want to use it and I don't like to use any additional variable to pass the function for each of arrays that I pass to function.
How can I do that?
I want to calculate length of my array, say Unix here.
Code:
[linux1@HMLINUX1 abc]$ declare -a Unix=('Debian' 'Red Hat' 'Suse' 'Fedora');
[linux1@HMLINUX1 abc]$
[linux1@HMLINUX1 abc]$ echo ${#Unix[@]}
5
This should be ideally 4, but somehow it is showing as 5. However, when I am removing the space as RedHat instead of Red Hat, it is working perfectly.
Code:
[linux1@HMLINUX1 abc]$ declare -a Unix=('Debian' 'Redhat' 'Suse' 'Fedora');
[linux1@HMLINUX1 abc]$ echo ${#names[@]}
4
I have experienced amarok crash after which i am not able to bring it back to working state. I tried to reinstall it multiple times from standart playground and kde KDE:UpdatedApps repositories. Every time. i start amarok it hangs on splash screen consuming 49% of CPU with no signs to load completely. I guess i need to clean reinstall with deleting all tracing info form previous install?
here's output from console:
Code:
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
101003 11:21:54 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
InnoDB: Reading tablespace information from the .ibd files...
InnoDB: Restoring possible half-written data pages from the doublewrite
[Code]...
I've reinstalled Grub2 multiple times before, but Ubuntu was on /dev/sda1, now it is not. Here is my partition table:
/dev/sda1 - 105GB - Windows
/dev/sda2 - 200GB - Extended
/dev/sda5 - 110GB - Media
[code]....
On Ubuntu 10.04 I would like to setup udev to execute a backup script when a specific USB drive is inserted. Udev detects the USB drive, but my script is executed 7 times instead of just once. Can't figure out what's wrong.
My udev rules file:
Code:
/etc/udev/rules.d# cat 20-stick.rules
ACTION=="add", ATTRS{vendor}=="Kingston", ATTRS{model}=="DataTraveler G2 ", RUN="/usr/local/bin/sync.sh"
Dummy backup script: connecting USB drive results in 7 times date written to /tmp/test
code....
I am running 11.04 with the Unity environment from a USB stick. With "Ubuntu Classic", I can open up my Home folder multiple times and thus copy files from one location to another with drag and drop. In Unity, it seems I can only open up one occurrence of the Home folder. Does anyone know if multiple Home folders can be opened up?
View 1 Replies View RelatedI just don't get it? I've attempted multiple times to get the knetworkmanager to connect to an unencrypted network, yet it keeps asking for a wep key. However the networkmanager in the Gnome version connects to unencrypted networks just fine. Why won't knetwork manager do the same?
View 9 Replies View Related