want to set more text files. They have "tab" differently (3, 4, 6 or 5 characters space).I have to use "sed" or "awk" sette them in the same tab (for example five space haracters).
View 14 RepliesWhere are the other BASH commands/exe stored? If the commands are part of the exe of BASH than ls would not be in a path, correct?
View 11 Replies View Relatedim pretty sure this is a remedial task for many of you but im having an issue with arrays from a shell script being accessed in an awk command. im pretty good with shell scripting but i am embarrassingly unfamiliar with awk. so here's the meat of the script...
Code:
I am trying to take an input file of ip addresses and corresponding netmasks and put it into a format to be loaded onto a juniper switch. the result should look something like this.. x.x.x.x/netmask using the cidr notation. no matter what subnet is provided though, /32 always gets appended to the end of the ip even when it should be /16, /24, etc... also, the cisco part works fine so that doesnt need any attention.
I have a command which on the command line needs to look like this
rlam -if3 '!pvalue -H image1.jpg' > image2.jpg
Nevermind what rlam or pvalue do ... they are part of a program package I am using. The above command works on the command line, and also when written verbatim in a bash shell script.
My problem is: in the script I wish to replace image1.jpg with the content of a variable, e.g.
IM1=image1.jpg
How to I get the script to insert the value of $IM into the command when the pvalue part of it needs to be quoted?
need to modify some scripts to repeat the commands in them until a variable returns a proper value. I need it to add some redundancy to some scripts i use to upload files to a remote server.This is an example of a portion of those scripts:
Code:
################## site UPLOAD ##################
site_login=$(curl -c $site_cookie -L -F user=$site_user -F pass=$site_password -F
[code]....
I am running a simple script that I copied from slug.ceca.utc.edu/docs/2009-3-26-linux-server-health.pdf and edited with the names and paths of my own servers. I don't know much about scripting (re: nothing) but I wanted to try and be efficient in my new role as a Linux Sys Admin. The script was saved to root's home directory and runs as part of root's crontab once a week. The script runs with no problem, but it doesn't actually seem to run all of the commands contained within. It skips some in the middle and the end and I don't know why. The script itself is this:
Code:
#!/in/bash
uname -a > /tmp/server.txt
[code]...
I have read where C is first converted to Assembly before its final compilation to binary. Is there a way to do this with Bash commands? I would like the understanding that Assembly allows to Bash somehow.
View 14 Replies View RelatedIn gnome terminal it is possible to open multiple tabs with Quote:$ gnome-terminal --tab-with-profile=jake_lardasset --tab-with-profile=virtualsexgranny -x alpineWe got even further....Quote:gnome-terminal --tab-with-profile=james_treesexer --command pymol --tab-with-profile=loverboy13 --command alpineand pymol runs, but not in the tab and alpine runs in the tab.The problem is, that when using a script to check mail it has Quote:gnome-terminal --tab-with-profile=chrissypink --command alpine --tab-with-profile=jake_hugerichard -x ssh xxxx@xxxx.ut.eenot the other way aroundIs there a simpler way to do this?And why is it not possible to execute ssh with the --command parameter and -x has to be used ,but top and so on can be executed with --command
View 2 Replies View Relatedbelow are the details of my system. I have bash as my current shell, some really common commands aren't working.
Do I need to do a re-installation of bash? Or how do I install a selection of bash commands which I need? (for example a subset of [URL])
Code:
root@sdptfw:~ # uname -a
Linux sdptfw.sdpt.co.za 2.4.36 #1 Tue Jul 22 13:13:24 GMT 2008 i686 i686 i386 GNU/Linux
root@sdptfw:~ # echo $SHELL$
/bin/bash$
[Code]....
Firefox is sometimes slow opening new tabs/switching between tabs. If I click on the kickoff application launcher button, it takes a few seconds to open, and typing something in the search makes it hang up for about 20 seconds before it does the search. Clicking on an app takes 16 seconds before the menu window closes and the program begins to start. Then it takes another 30sec-1min before the app is usable. smplayer plays video with tearing.
Like right now I tried taking a screenshot, and it tells me
Error launching /usr/share/applications/kde4/ksnapshot.desktop. Either KLauncher is not running anymore, or it failed to start the application.
while the app worked fine.
I also tried running glxgears right now, and it runs but the gears don't move, and terminal states
15 frames in 19.0 seconds = 0.789 FPS
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
after 48 requests (48 known processed) with 15 events remaining.
If I'm on dolphin, and I click a video to start smplayer, it takes about 1 minute for it to start.
Memory is using 1.4GB out of 3.6GB, with 0.08GB/2GB swap
Top shows an average usage of less than 10% average. Xorg is always 25%, kwin is always 10% and then rest of the apps are less than that.
CPU: AMD Athlon(tm) II X4 620 Processor
Integrated VIdeo: HD4200 with fglrx driver
When I ssh into the computer with x tunneling, the programs start up faster than being on the desktop
Which do you prefer and why? Also, I remember someone telling me once that while using space indentation use either 4 spaces or 2 spaces. Don't use 3 spaces. Anyone know why they would say not to use 3 spaces?
View 14 Replies View RelatedI writing a script to go through multiple reports. I want to grep daemon.debug @10.10.10.10 on all reports to make sure it is pointing to the right IP address. the problems is the space between debug and @10 are different on all the reports, some have one space some have two and some have tabs how do I ignore the tabs or spaces and grep daemon.debug @10.10.10.10
daemon.debug /var/log/ftp rotate size 20m files 4 compress
daemon.debug @10.10.10.10
authpriv.* /var/log/secure rotate size 20m files 4 compress
authpriv.* @10.10.10.10
What happens when the script executes is that the ssh connection works and parks me at the remote hosts's shell login. Therefore, the "firefox" command refuses to execute. I need to know how to make the "ssh" connection occur, stay open, and go into the background so that the rest of the script can execute.If I could also do this with the "firefox" line so that the entire term window could be closed would also be helpful.
View 3 Replies View RelatedI'm setting up a scheduler to run some bash script commands but they won't run when I point them to a script file. If I change the cron to call
[code]...
If I run ./writeTimeToLog from the terminal - it, well, writes the time to the log file! I then use
[code]...
to test I can schedule this to run every minute just so I can see it working. the entry was a basic as I could make. It adds the cron successfully but never seems to update the file. Where would an error be put if one occurred.
I would like to be able to connect to a machine, list a directory, wait long enough for me to see the results then move on to the next machine.This is failing:
Code:
#!/bin/bash
while read line; do
[code]...
I would be running SQL commands (UPDATE/SELECT) from within my bash script. I am completely new to this subject. Is MYSQL used for this purpose? Alternatively, what is sqlplus?
View 6 Replies View RelatedOur CentOS 5 server had a weird issue last Friday. We couldn't run any bash commands, such as ls, vi. It said that it could not find /bin/ls. The only commands we can run are internal commands, such as ps, cd. After we reboot the server, everything is back.
I don't know what's wrong with it. Does anyone give me a explanation?
I need to launch a bash file in Linux from an unprivileged user session, file that will run bash commands as root. But I do not want to create an user with root privileges to do that.
View 10 Replies View RelatedThis is a really odd bug I can't seem to figure it out. Basically, commands like ls can see all the files in the current directory, however when I go to execute the file it will give errors like "file not found", even when it most obviously is. If you look at my command history in the screenshot, you can see I can ls into a directory and see it's contents. When I try to run the file, I get the "no such file or directory" error.
However, if I type simply 'vm', I can't use tab completion to complete the directory name, and my third command is me typing 'vm' and hitting tabtab, it lists a bunch of vmware specific tools instead of the subdirectory name. I can then ls and see my current directory contents, and it will list only the single subdirectory. However, then I tried to use the full filepath from root to run the file, still to no avail. If anyone has any insight,
is there any way I can pass commands to the CLI of a tool directly?
I would like to script some actions, for example:
./OpenBTS < "tmsis"
I do not need to retrieve the results (I watch it in the log file). how I could realize that? There is now way to do this using command line parameters, at least not that I found out. So it looks like I have to figure out sth myself. Maybe I could automate screen in a way to detect the prompt and "paste" my command there. Are there tools for this on Linux?
Is there any way to list just the folders in a directory using bash commands? ( as the ls command lists all the files and folders )
View 3 Replies View RelatedWhat is the difference between For and While when creating loops in bash scripting?
View 1 Replies View RelatedI made a script that contains repetitious commands (snmpget and awk are the only ones at the moment. Running these commands from standard terminal work, but when run within a script, I get:
./reg_sm_count: line 10: snmpget: command not found
./reg_sm_count: line 10: awk: command not found
./reg_sm_count: line 10: snmpget: command not found
[code]...
I'm creating a bash script that contains the following line:"ssh user@$server1 cd /tmp; pwd"What I want is to print /tmp of server1, but the script it isn't printing that
View 2 Replies View RelatedI'm trying create script to manage one mysql database, including new db and user creation. But I'm not able get it working when I put SQL commands into function. So I create simple script for testing which is still not working
Code:
#!/bin/bash -x
MAIN_DIR="/admin/mysql"
MYSQL_CNF="$MAIN_DIR/auth.cnf"
MYSQL_CMD="mysql --defaults-file=$MYSQL_CNF"
[code]....
I'd like to add custom startup commands (for example starting a process, registering to a registration server, downloading a configuration file) to the Linux startup process. Those commands should be triggered on startup only. What is the standard/appropriate way to do this?
EDIT: Is /etc/profile the right place to trigger such things?
EDIT2: I'm using Ubuntu.
I created variables in python and would like to be able to incorporate those into bash commands that will be mixed into the script. Example:
Code:
name=raw_input("Type your name and press ENTER: ")
import os
os.system( echo "name")
Of course this doesn't actually work, but i think you get an indication of what I am trying to do.
Is there anyway to test a bash script without actually running the commands to see if the syntax is proper? Google is of no help.
View 5 Replies View RelatedI'm trying to write a bash script that will simultaneously ping a host and execute a traceroute at the same time. I would like the results to output to a text file.
View 6 Replies View RelatedI was reviewing some scripts written by a person that does not work with us anymore and I found a chunk of code I'd like to know more about.
Code:
mycli <<! >> /var/myprogram.log
command_1
[code]...