For gcc, it seems that there are multiple include paths like /usr/include and /usr/src/linux/include. How do I check the current include path for gcc via command line? How do I edit it?
What about for cc?
I am facing the following error while running SplitOff.exe in machine 172.24.130.245 :
Error :
ld.so.1: SplitOff.exe: fatal: libstdc++.so.2.10.0: open failed: No such file or directory.This file is avilabe in ap/local/lib path.
how to include the path of exe in the ld library path [only System admin has permission]
I am having problems getting my fedora 13 system to recognize my apache tomcat lib which contains lots of jar files needed to compile servlets and jsp based Java programs; i have set the classpath env variable code...
View 2 Replies View RelatedI'm trying to install tgrep using the INSTALL file but I'm gettin errors. The following messages speaks for itself.
Code:
denish@ubuntu:~/tgrep$ ./INSTALL
THIS IS THE CONFIGURATION SCRIPT FOR TGREP
answer all questions with full pathnames
I cannot determine the gcc include path on your system. Please enter the gcc include path if it is available: /usr/include
[Code]...
I have probably a stupid question. How do I add an include path for kernel module makefile? I want to include "test_kernel.h" in test_module.c
test_kernel.h resides in a different directory with relative path "../../common/" . I can include the file specifying the relative path, which works OK:
#include "../../common/test_kernel.h"
I would like include it without the relative path and specify path in Makefile similar to -I option available in application makefiles. I have tried EXTRA_CFLAGS += -I../../common/ in the makefile but no use.
I just did a fresh install of Lucid Lynx 10.4, but now whenever I boot up, at the boot loader, Windows 7 is no longer on the list. I want to now how to properly edit grub.cfg in /boot/grub so that I can boot into Windows 7 from the boot loader. The Windows partition is found in /dev/sda2. The folder name is 2EB2621EB261EB33. If anyone could tell me how write the entry in grub.cfg for Windows 7 to boot that would be awesome!
View 9 Replies View RelatedI am trying to edit the iptables to include some ports/ip for openfire server. The problem is the computer is very locked down with permissions...I logged in as ROOT with ID 0.Now the iptables has ROOT for permission BUT ID 1 which reflects BIN.As root i cant edit or chmod/chown the iptables. Here is what i tried:
1. change password of BIN - successfully changed with no errors BUT still cant su BIN with the new password...
2. tried changing the ID of ROOT to 1 but I dont have permission to use the command....
so anything i can do here??? I dont have permission with Shadow either...
Java applet not loading image with relative path(e.g. images/1.jpg) but loads image with absolute path(i.e. from /root/user/images/1.jpg) . This is a problem when i want to host the applet on web server
View 2 Replies View Related10.3 - need to edit my PATH- pls advise editor and location of PATH.
View 2 Replies View RelatedIs it possible to view and edit db3 files in linux? OpenOffice does not do it and dbview says it can't read version 83. Just wondering. I am not really firm with databases, but i remember that i did view databases in linux.
View 3 Replies View RelatedUsually when i did, for example:
:~/> vi documents/<tab><tab>
i would get list of files in 'documents' dir on my konsole.
:~/> vi documents/
doc1 doc2 doc3
Bu now in 11.4 when i do that i get whole path, like this for example:
:~/> vi documents/<tab><tab>
:~/> vi documents/
documents/doc1 documents/doc2 documents/doc3
how to make it look "old" style?
Is there a way to display and edit the full path of the current directory in nautilus? I am using Ubuntu 10.10 and I think it was possible with an older version.
View 3 Replies View RelatedHow to I open, create, edit, or view a file in Linux?
View 5 Replies View RelatedSimilar to this question [URL] but I am asking for filezilla in linux. I am using ubuntu lucid 10.0.4. Currently my filezilla opens files using openoffice. I want to change to gedit for all the .log files etc. Some reason, my filezilla has no File Edit and other settings. This is the screenshot [URL].
View 1 Replies View RelatedI have installed Fedora 12 x86_64 and vsftpd. I would like to set up an user for FTP so that he/she could only view/edit files in one certain folder (the one that I set up). How would I go about doing that?
View 2 Replies View RelatedAre there any tools to view/edit user space memory of running processes on Linux?
It would be a great learning tool.
Does anyone know how to get the path with a inode number by C programming?
Or can I get the absolute path without giving a "path" but a inode number by C?
like this: get_path(unsigned inode);
not such this function: getcwd(".", xxx);
taowuwen@gmail.com
I am working on a Linux embedded C++ project. When I do an install, all of the header files are copied into the target at /usr/include/.My question is, why would the target ever need the C++ header files? It seems to me all the target needs is the executables and the library *.so files.I want to remove the installation of header files into the target but I'm afraid I'm missing something.
View 3 Replies View RelatedI'm learning GTK , and would like to use Codeblocks, and/or KDEvelop, and compile my c files using that, but always get an error about gtk/gtk.h not found, but can't figure out how to add the commands... I normally type gcc -o Program1 main.c `pkg-config --libs --cflags gtk+-2.0` That's a lot to type every time to compile.. Isn't there an easier way, in KDevelop, Monodevelop, and/or Codeblocks to make this step quicker, by adding some sort of I-/usr/include commands, or something?? thanks in advance, =). I looked online for some results, but didn't come across anything handy..
View 1 Replies View RelatedBasically I have a dir that contains my makefile and another directory inside this called source this holds main source files. External to these I have a couple of dirs common and drives.
In my make file I use
To include the protoypes from the headers in the folders common and drivers used by source, this works fine. However in common and drivers I use a few variables that are set in the source dir. I set these with externs inside the common and driver files. However I'm sure I should be able to set the directory path for source inside my makefile. So say I have inside source hardware.h with prototypes, I set DINCDIR = -I/Source -I../Drivers -I../CommonFiles
Then from a c file inside my common folder I say #include "hardware.h" the file should be able to see hardware.h and it's protoypes. However I get:
Is there some way I can get the extern dirs to see the source dir?
The set out is something like;
What's the best way to include variables in a string using C,i.e if i want to do the following query in C, how would i do that.How do i build the string variable up in C?
View 1 Replies View RelatedI am trying to re-write my local web pages in HTML5. My original pages used an include file so that I had a consistent set of links on the top of each page. I used - require("link_list.php");
But this does not seem to be possible in HTML5. I am guessing that there is a way to do this, searching the web suggests object or embed, but these create a new page within my original page, which is not what I want.
I need to include variables in a system() call. This is that I have:
[code]#include <iostream>
#include <stdio.h>
#include <stdlib.h>
using namespace std;
[Code]....
P.S.: I know this is a pointless redundant program, but it's part of a larger project learning process.
I am trying to learn how to include common elements on every page. At first I made the mistake of calling it ssi but I do not think that is correct in php5. I downloaded phpb3 to look at and they are not doing it that way. they do it like this.
Code...
Problem is I can not find any articles that explain it. I even looked at the php manual and did not find it. Could someone explain this or point me in the right direction.
I'm using Eclipse to build a small c++ program using boost.
Code:
#include<iostream>
#include<string>
#include <boost/regex.hpp>
[code]....
I can right click on boost::regex and it takes me to the header file regex_fwd.hpp, but when I go to build it, it gives me the error:
Code:
DescriptionResourcePathLocationType
/usr/include/boost/regex/v4/basic_regex.hpp undefined reference to `boost::basic_regex<char, boost::regex_traits<char, boost::cpp_regex_traits<char> >
[code]...
I have installed QT on Slackware 13.37 x64 and when I create gui project it works ok, but I need OpenGL.When I add #include <QGLWidget>I get error No such file or directory there is my env
Quote:
CPLUS_INCLUDE_PATH=/usr/lib/qt/include
MANPATH=/usr/local/man:/usr/man:/usr/lib/java/man:/usr/share/texmf/man
KDE_MULTIHEAD=false
HZ=100
[code].....
What is the difference between /usr/local/include and /usr/include? When I compile my program, is both /usr/local/include and /usr/include avaliable? Can I copy a file from /usr/local/include to /usr/include?
View 1 Replies View RelatedI just downloaded the SDL source code. i did compile and make of this code.then i did make install. but i didnt see the files of SDL.h and lib.SDL.*** in /usr/include/ but later i found out that these files are placed in /usr/local/include and /usr/local/lib. how can i specifically install libraries on /usr/include and /usr/lib
View 2 Replies View RelatedSuppose I have the library code in library.cpp. I found that to include the version information in the .so library, I had to use these command forms:
Code: Select allg++ -Wall -fPIC -c library.cpp
g++ -shared -Wl,-soname,library.so.0 -o liblibrary.so.0.1
The howto then continued to recommend creating symbolic links pointing at the newly compiled library. [URL] ....
The result is, during the booting sequence, I am receiving this error:
Code: Select alllibsystemd-login.so.1: no version information available (required by /usr/bin/dbus-daemon).
The library is the one I am working on.
I use OpenSuse 11.3, Eclipse Elios for C++. What do I have to do for using boost? I put #include <boost/regex.hpp>, but it can't find the file. What variable do I have to use?
View 3 Replies View Related
