I am facing the following error while running SplitOff.exe in machine 172.24.130.245 :
Error :
ld.so.1: SplitOff.exe: fatal: libstdc++.so.2.10.0: open failed: No such file or directory.This file is avilabe in ap/local/lib path.
how to include the path of exe in the ld library path [only System admin has permission]
Suppose I have the library code in library.cpp. I found that to include the version information in the .so library, I had to use these command forms:
Code: Select allg++ -Wall -fPIC -c library.cpp
g++ -shared -Wl,-soname,library.so.0 -o liblibrary.so.0.1
The howto then continued to recommend creating symbolic links pointing at the newly compiled library. [URL] ....
The result is, during the booting sequence, I am receiving this error:
Code: Select alllibsystemd-login.so.1: no version information available (required by /usr/bin/dbus-daemon).
The library is the one I am working on.
In the process of installing DDD, I get the following error:The X11 library could not be found. Please use the configure options '--x-includes=DIR' and '--x-libraries=DIR' to specificy the X location.I did a "yum install libx11-devel". I was told that the right package was installed
View 1 Replies View RelatedI am having problems getting my fedora 13 system to recognize my apache tomcat lib which contains lots of jar files needed to compile servlets and jsp based Java programs; i have set the classpath env variable code...
View 2 Replies View RelatedI'm trying to install tgrep using the INSTALL file but I'm gettin errors. The following messages speaks for itself.
Code:
denish@ubuntu:~/tgrep$ ./INSTALL
THIS IS THE CONFIGURATION SCRIPT FOR TGREP
answer all questions with full pathnames
I cannot determine the gcc include path on your system. Please enter the gcc include path if it is available: /usr/include
[Code]...
For gcc, it seems that there are multiple include paths like /usr/include and /usr/src/linux/include. How do I check the current include path for gcc via command line? How do I edit it?
What about for cc?
I have probably a stupid question. How do I add an include path for kernel module makefile? I want to include "test_kernel.h" in test_module.c
test_kernel.h resides in a different directory with relative path "../../common/" . I can include the file specifying the relative path, which works OK:
#include "../../common/test_kernel.h"
I would like include it without the relative path and specify path in Makefile similar to -I option available in application makefiles. I have tried EXTRA_CFLAGS += -I../../common/ in the makefile but no use.
i'm using slackware 13.0 with glib2-2.18.4-i486-1 and gtk+2-2.14.7-i486-4 i need to install newer gtk+2, i've installed glib-2.25.7, but in my home directory, so how do i configure the gtk+2, so it points to the glib library path in my home directory. i've tried this command
Code:
./configure BASE_DEPENDENCIES_LIBS=/home/sadlie/.testapp/usr/lib
but it still comes with the same error message
Code:
Requested 'glib-2.0 >= 2.23.6' but version of GLib is 2.18.4
Requested 'atk >= 1.29.2' but version of Atk is 1.26.0
I would like to set run time library path in my makefile, so that my exe should search run time libraries in that path when executed. How to set this in makefile?
View 3 Replies View RelatedI'm writing an application and want to make possible to compile it with or without an optional module. This module requires perl library to be compiled, so I want to check presence of it in 'autoconf'.
The problem exists because perl library is placed in 'non-standart' location itself (like a /usr/lib64/perl5/CORE/libperl.so). So when I try to run configure (with AC_CHECK_LIB or AC_SEARCH_LIBS), it cannot find and link libperl.so in its test.
Trying to pass ./configure CFLAGS=-L/usr/lib64/perl5/CORE/ or ./configure LDFLAGS=-L/usr/lib64/perl5/CORE/
How can I define a location to search for configure's tests?
I was wondering if there is an argument I can pass to the configuration file to have it use a library from a non-standard path to compile with - for example I would like it to use my perl located in /scratchbox/users/jeff91/usr/bin/perl instead of the standard /usr/bin/perl
View 3 Replies View RelatedI'm writing an application with a plugin architecture and would like modify (specifically add to) the dynamic library search path while the main executable is running.
The plugin paths are not known until the application is running so I can't set LD_LIBRARY_PATH ahead of time.
My understanding (although I haven't tested it) is that the executable will only parse the LD_LIBRARY_PATH once, early on, so modifying this environment variable at runtime will have no effect.
(Note - on Windows the solution is to modify the PATH environment variable)
I know it's possible to specify the full path to load a dynamic library, and this would work if the plugin(s) only had a single library to load, but some of them will have a bunch of libraries with their own inter-dependencies, so I'd like the plugin folder(s) to get added to the search path to pick up the dependant libs.
I'd like to get path of one library to link it dynamically in my program. Probobly the best way would be to add macro to my configure.ac file.
View 2 Replies View RelatedI am using json library for my application. I have mentioned the path where the library resides in the LD_LIBRARY_PATH. while compiling i have given the following commands.
gcc -o pafitest pafi_test_app.o -ljson
but still i am getting this following error.
/usr/bin/ld: cannot find -ljson
collect2: ld returned 1 exit status
What is the difference between /usr/local/include and /usr/include? When I compile my program, is both /usr/local/include and /usr/include avaliable? Can I copy a file from /usr/local/include to /usr/include?
View 1 Replies View RelatedI just downloaded the SDL source code. i did compile and make of this code.then i did make install. but i didnt see the files of SDL.h and lib.SDL.*** in /usr/include/ but later i found out that these files are placed in /usr/local/include and /usr/local/lib. how can i specifically install libraries on /usr/include and /usr/lib
View 2 Replies View RelatedI found the following function in /etc/profile file.
[Code]...
1. I dont undestand what "if ! echo $PATH | /bin/grep -qE "(^|:)$1($|:)"" this if statement actually comapres??
2. Also what is the difference between PATH=$PATH:$1 & PATH=$1:$PATH
I was trying to install usb-modeswitch edora-14 (64 bitt saidCode:usb_modeswitch.c:56:17: fatal errr: usb.h: No such file or directoryWhen I tried to install libusb, it said that it is already installed and is the latest version. But, it still doesn't show usb.h in /usr/include directory.What shall I do to make usb-modeswitch?
View 4 Replies View Related./configure script fails to configure libsf. Please check the following last few lines of configure script error.
But find command shows the following;
It seems the file libdb does exist. man dbopen displays man page for dbopen. I also tried to ln -s /usr/lib/libdb.a and libdb.so /lib dir but all were in vain.
I'm trying to get a Balkin f5d8010 working in Ubuntu 10.10, 64 bit. Most of what I see from searching the web is from 2008 or earlier. Anyone know if the newer kernel(s) include support for this, or can I get the drivers somewhere?
For what it's worth, lspci shows:
Code:
I came across this.
[url]
I'm reading about shared, static, and dynamic libraries. What is SDL? Is it static, shared, or dynamic?
I always thought a library would be a lot of .h and .cpp files compiled separately into .o files and then if you compiled your own program you could use the -l parameter to link the library and it was all compiled together. Now I'm not so sure.
I don't even see any SDL .cpp files in my system anywhere. All I have are lots of SDL .h files in /usr/include/SDL and I don't really understand the code in them.
I'm making a wild guess here: SDL is a shared library. SDL itself is NOT compiled into my program, therefore SDL must be on any system my program tries to run on. When I compile and link SDL all it needs is the header files to know what SDL function and objects it can use. And then on every system it uses an already compiled SDL shared library thingy somewhere.
So... where is that part of SDL? All I can find are header files.
I'm thinking the advantage of shared libraries is that someone could say update SDL on their own system and take advantage of the new features without having to download new executables with the new version of SDL compiled into them for every program that uses SDL.
So if I'm making an editor and a game engine and they both use a lot of the same .cpp and .h files that I wrote and I'm tired of updating one and then the other and I need to turn them into a library, then a shared library might be kind of a silly solution. I could just make a static library. Right? Because it's not SDL. Nobody else is ever going to use this library.
I use this command:
Code:
find ./ -atime +360
to figure out the files that haven't been accessed since 360 days. The command above will return results like this:
Code:
/uploads/2010/02/some-file-name.ext
/uploads/2009/08/another-file-name.ext
... etc
I'm taking here about tins of directories, thousands of files. I'm looking to find a command that makes me able to move the results above to another path, and to create that path once it doesn't exist like below:
Code:
mv /uploads/2010/02/some-file-name.ext /old-files/uploads/2010/02/some-file-name.ext
But I want the executed command to create this path
Code:
/old-files/uploads/2010/02/
If it doesn't exist.
Java applet not loading image with relative path(e.g. images/1.jpg) but loads image with absolute path(i.e. from /root/user/images/1.jpg) . This is a problem when i want to host the applet on web server
View 2 Replies View RelatedI have a program that takes a relative path as input appends it to a some path string to get the actual path.
Now all I can input is the relative path. So if I want to go one level above my input will be ../mypath.
If I know the depth of the path used internally, I can use .. as many times to go to the root directory and then give the absolute path. But suppose I do not know the depth of the directory, can I construct a relative path string such that it considers it as a relative path. One way could be to have enough .. in the path string so that I can force an absolute path for some maximum depth of path.
Is there some path string syntax that I am not aware of but can achieve this?
Experimenting with shell variables, accidentally deleted the path variable how could I return to the original path value. What kinds of problems will I have if I don't have a path variable.
View 3 Replies View Relatedhow to add a path to PATH variable permanently so that it remains persisent even after closing shell and rebooting the system when i added a path, to variable it remained there as long as i didn't closed the shell. but when i reopened it ,changed were undone.
View 2 Replies View RelatedI have a path c:windowsackup I need this string to be changed into /windows/back/up I used the command -bash-3.00$ echo windackup | sed 's/\//g' but the output is windbackup
View 7 Replies View RelatedCurrent script:-
prefix=user@my-server:
find . -depth -type d -name .git -printf '%h�' | while read -d "" path ; do (
cd "$path" || exit $?
[code]....
How shall i go about changing the absolute path to relative path, so that /home/git/mirror/android/adb/ndk.git gets converted to /mirror/android/adb/ndk.git //echo <command> "$prefix$PWD.git" ?? - anything for relative path?
Currently, I am trying to use the Kdevelop4 in linux debian to make some debugging on a simple project. I added the <db.h> in the text editor and it is working. Unfortunately, when I am trying to build an "undefined reference to db_create error". So how to cope such error and where I have to add the searchable link libraries in Kdevelop4.
View 3 Replies View RelatedI just set up my ubuntu 10.10, which boot up by usb drive,
and I found a problem that I can't get my internet when I was
sitting in a public library. The firefox show me every website is
untrust. Normally, when first connect to this network, I need to
accept a library contract on webpage, which called spyder.local.
Does anyone could fix it? or there is something related to the
firefox setting. I currently keep every setting by default