I'm trying to write a bash script that helps me building C program then run the C program but I don't know how to make it run.I did like this
Code:
#!/bin/sh
# assuming I've built C program '$output' successfully
[code]....
I will have to code this. However I am lacking of time since I have too much to do. make a short code bash/dash to prompt the country with Zenity, then, get the PLS or m3u url and prompt with another zenity which radio to play. http://www.listenlive.eu/index.html
My code to get url's radio country.htm is:
Code:
I have for example the following IP addresses:
24.172.220.218
41.239.36.19
63.215.202.234
66.176.124.22
[code]....
How can I sort those IP addresses? I want to sort them using the first 3 numbers I also want to count the number of times that address is repeated This is a batch program.
Trying to do a simple bash script, and having some issues. I am relatively new to bash, and did my best to search, but idk what exactly to search for.
Doesn't work code...
I'm trying to write a bash script program in the Linux command terminal that will write to a fellow user and then continue reading down the program. this is what i have (kind of explains the idea too):
#!/bin/sh
clear
echo "this is before the write command"
write jcummins
this message should go to jerry
echo "the message didn't send and this string will not appear"
echo "it appears it has stopped at the write command"
I am trying to write a bash script that installs a program fully automated for me. I am stuck at the one part where i need to change a line in one config file. I have tried various syntax for sed and none have worked. Maybe someone can suggest how to go about this. Since the line appears in the middle of the file, I can't use echo or cat. Also the file will be diffrent lengths depending on the install.
The line I need changed is:
I need that changed to:
the last syntax i tried is:
Yes this is for PNP4Nagios on centos 5.6 64bit. If i can get this figured out. I will be willing to post the whole thing for others to use. it will be used to install PNP after a working nagios install is done.
Everyone knows that it is like impossible to use mplayer to watch an *.html file. OK.
For instance here is a cool example of lot of streaming for firefox
http://watchtvlivestreaming.com/tvlive/b5499
Code...
Anyone is there a talented bright coder, coming from hell -because it is really difficult, to make such console program ?
I would like to know how do I print the line # in a script. My requirement is, I have a script which is about ~5000 lines long. If there are any errors happen I just exit. And I would like to add the line # of the script where the error happened.
View 3 Replies View Relatedsimple bash code:
Code:
#!/bin/bash
trap "echo 'you got me'" SIGINT SIGTERM # to trap ctrl+c
echo "Press ctrl+c during 5 sec loop"
for ((i=0;i<5;i++)); do
[Code]...
How come code behaves normally and stops when ctrl+c signal is caught and resumes, but after I use at least one timeout read in the code it looks like, if signal is caught again it doesn't pause the execution but skips the loop. If you remove -t (timeout) option from the read, both loops look the same!
I have a config file that contains:
my.config:
Code:
Now in my bash script, I want to get the output /home/user instead of $HOME once read. So far, I have managed to get the $HOME variable but I can't get it to echo the variable. All I get is the output $HOME.
Here is my parse_cmd script:
Code:
I have written quite a few separate bash & scripts and php scripts that up to now I have run from cron jobs. However I have to estimate how long each takes to run, before running the next and so it probably takes much longer than necessary to run them all. They have to run in order.
Now there are so many I am thinking it would be better to have a master bash script that would run one after the other, but I am not sure how to get the master script to wait before starting to run the next script. Is this possible and is there a command that will make the script wait between bash and php scripts , for them to finish, before running the next?
I would like to get the filename (without extension) and the extension separately. The best solution I found so far is:
Let FILE="thefilenameofsomefilesfor_instance.txt"
Code:
NAME=`echo "$FILE" | cut -d'.' -f1`
EXTENSION=`echo "$FILE" | cut -d'.' -f2`
I think it would be better to count the len and remove 3 chars to right to get the extension, but it can be macintosh filenames with have 4 chars for extensions.
Ok so Basically i have 2 questions
1. i know how to create a file with c++ using but is there a way to save it to a specific location on your computer with windows and linux
Code:
2. i need to know how to run/execute/open a file in a c++ program im using and its not working
Code:
Is there a way to have a bash script run as a program so you can start it like how you would run apt-get?
View 2 Replies View RelatedSo I open firefox from my bash shell with:
Code:
firefox google.ca
it opens firefox, I can browse, etc.
Now if I alt-tab back into my shell, i can't enter any commands in the shell.
I know that i can do this if I close firefox, but I want to keep working in my shell with firefox still open.
Is this possible?
how to interactively operate with program using bash? such as program would ask user to select choice between "a/b/c" and then input enter to confirm? i know i could use
program << EOF
a
EOF
to choise "a", but how to input "enter", so that i could call this program in my script.
A bash script that runs a program N times, takes the numbers program produces (each time different) and calculates the average of those numbers.
View 2 Replies View RelatedI wrote this script which works but it should run automatically about once per week. I hunted and experimented with KDE Task Scheduler (no dice and no help anywhere) and cron (confusing instructions and cannot edit crontab -e with vim, and cannot enter cron folders/files). I would settle for a desktop shortcut to run the script but found no for that.
Script:
Code:
#!/bin/bash
xterm -hold -e fstrim -v /
Machine:
OS: openSUSE 11.4 x86_64
[code].....
I need to rename the resulted searched files from a loopI have the following code:
find . -name DOC* | while read i
do
find $i -type f -name '*.txt'
done
basically, I am searching for all txt files inside any folder starting with DOC name.this code is working fine with me.I need to rename those .txt files to .txtOLDOS: Ubuntu 10.4Bash shell
im trying to build a simple program for my C programming class, this is the source code
#include <stdio.h>
int main()
{
int length, width, length, height, area, perimeter;
perimeter = width + length + height;
area = width * length + heigth;
[Code]...
i dont see any error (you might)but every time i run it it runs but after it asks me to input for the width i do it but it doesn't take me to the length, it just stays blank until i input another value in the same place for the width, it asks me for 4 inputs in total i don;t know why, and after i run it different times it gives me different values for the perimeter and are. how can I fix this?
I am trying to write a bash script that sources another bash script. Essentially, I need a few lines to check to see if a certain variable is set. If not, I set it manually, and then source a scripts with that variable in the path. I wrote a test script to try it, but for some reason the last line does not work. Here is what I wrote:
#!/bin/sh
source ~setupdir/setup.shrc #just a test, this line works
echo ${#SETUP} # prints 0 if setup is not set, which it isn't
if [ ${#SETUP} -eq 0 ]
then
SETUP="~setupdir"
fi
echo $SETUP # prints ~setupdir
[Code]...
i'm in the process of learing C++. currently i'm creating shell scripts to get things done. i'm just curious how, as a programmer using C++ you would get a similar job done.as an example i have a script that takes the contents of files, pipes it to some sed and awk commands, which is piped to create a new file. that file is then imported into a mysql database.if you were going to do this in C++, would you call the sed/awk programs to modify the file, or can it be done within the program itself? i'm probably jumping the gun here because i've just started learing about pointers so this is above my ability
View 12 Replies View RelatedI presume there is something in the JWM window manager - or Puppy Linux Lupu 5.01 itself that is conflicting with the normal loading of GMPLAYER....
I would like to know how to troubleshoot, and fix this problem if possible (even a workaround would be great).
I have beat this enough and don't get what should have been a very simple thing to do. I build a variable;
Code:
CLIST=java,lua,python,php,perl,ruby,tcl
CLIST will be used by another bash script but I need to replace the commas with a space. I
[code]...
Creating script that converts hex to dec. But without using bc calculator or other methods that could convert it in one line. I need to make something like this script that converts dec to hex.
View 1 Replies View RelatedI have a basic awk script that can read a file named 'server_info' and output to the screen which fax lines are not working. Now I want to make the script execute commands instead of printing to the screen but I am having trouble... This is better explained by my code below:
test.sh Code: #!/usr/bin/awk -f
#
#The name of this script is test.sh
[code]....
Distro: Centos 5, PHP 5I have done a bit research on running bash commands from php and there was little success. This is my relevant php script
<?php
echo exec('pwd');
?>
[code]...
I am trying to build a function inside a script.
Code:
#!/bin/sh
#System commands and other configurable.
IPT=/sbin/iptables
IP6T=/sbin/ip6tables
IPST=/usr/sbin/ipset
MODP=/sbin/modprobe
GET=/usr/bin/wget
INT_NET=192.168.1.0/24 .....
I can find lots of tutorials in how to use if, then, else. However, how do I define a variable inside the function?
SEE>>
Code:
for c in $ISO
Also, am I using the 'test' command correctly( -/+ week as valid test)?
I'm somewhere between Novice and I have no idea what I'm doing with bash scripts. I'm writing a script to deploy images using partimage on my company's desktops, and while I have just about everything else figured out I have one issue left.Each of our 4 sites that will be using this disc will have a deployment server due to the fact that our sites have dedicated point to point links that our business traffic is conducted on. I need to be able to determine what site I'm at based onubnet and set a variable based on this determination. What I don't know is how to get the IP address in to an if statement, and properly determine subnet. For example:
192.168.1.0/16 - 192.168.7.0/16 need to use DEPLSERV01
192.168.8.0/16 - 192.168.16.0/16 use DEPLSERV02
192.168.17.0/16 - 192.168.24.0/16 use DEPLSERV03
I know it's a very silly question but could someone please explain the difference between "/bin/bash" & "/bin/sh" I was under the impression that both are same but following output on my Ubuntu 8.10 is making me raise my eyebrows.
Quote:
parag@station3:~$ ls -l /bin/bash ; ls -l /bin/sh
-rwxr-xr-x 1 root root 725136 2008-05-13 00:18 /bin/bash
lrwxrwxrwx 1 root root 4 2008-12-03 21:42 /bin/sh -> dash
parag@station3:~$