I'm looking for a version of Getopts for Java that isn't licensed under the GPL and accepts long options (i.e. both -h and --help). My code is licensed under BSD and I don't really want to change that just because a module uses the GPL...
View 1 Repliesim trying to get the getopts command to run but for some reason the -d option fails to populate the variable and it remains empty.
Code:
#!/bin/bash
usage()
{
cat << EOF
usage: $0 options
[Code].....
This is my first post and I'm pretty new on Debian. I had used Ubunu for a while now and I've decided to move on Debian Squeeze.But I've one problem: I've a Java programm to install and the installer is GUI Java based. When I run the script, I've the next message:
Preparing to install. Extracting the JRE from the installer archive.Unpacking the JRE.Extracting the installation resources from the installer archive.Configuring the installer for this system's environment.Launching installer Graphical installers are not supported by the VM. The console mode will be used instead. Preparing CONSOLE Mode Installation. But this program is not able to run the installation in console mode.
I've tried to install sun-java6-jre but without success.Has anyone an idea to help me install this programm? My Configuration: Debian Squeeze 6.0 amd64.
I'm trying to compile JGR, rJava, etc. for use w/ my updated R. My configuration of Ubuntu (9.10 Karmic, kernel 2.6.31-22-generic) and R (version 2.11.1; from lib.stat.cmu.edu source) shouldn't be terribly unusual. But, all my efforts to compile Java programs for R fail, possibly because of something in my Ubuntu configuration of Java.First, I ran: R CMD javareconf. The output from that tells me that "JAVA_HOME is not a valid path, ignoring" and the cpp flags are set to nothing. The javareconf fills most of the variables with references to openjdk. JAVA_HOME, as far as I can tell, points to a properly installed copy of Sun Java. When I run update.packages(checkBuilt=T) with this, it unsurprisingly tells me that "One or more Java configuration variables are not set" and all of my Java based programs fail to compile.
I've tried switching the default Java to the Sun version using "sudo update-alternatives --config java". Now, javareconf fills in the cpp flag and variables point to the Sun version, though I still get the error msg that JAVA_HOME is not a valid path (though javareconf sets the home path to: /usr/lib/jvm/java-6-sun-1.6.0.20/jre). When I try to compile rJava, I get the error: rJava, "JNI types differ from the native type."Does anyone have any thoughts on how to fix this? Alternatively, is there somewhere I can report these problems so they might get fixed in future versions?I suspect I can't be the only person having these problems.
For the analysis of wireless mobile nodes simulations, I have downloaded Jtrana from [URL] This is a java based project but I do not know what steps I am supposed to follow to use it for my trace analysis. In fact I know how to compile a .java file, but jtrana is a complete GUI software.So I want to know to how to install it under fedora.
View 14 Replies View RelatedI have install Ubuntu 10.04 version. Then install Crossover 9 and run Internet Explore 7 on the crossover. Now I need to access web based system through IE7 which is java applet enabled system and also I have already installed java runtime environment on crossover. But that system can not access through IE7 it given some errors.
View 1 Replies View RelatedIs there any Linux software that allows accessing a pre-configured serial console via Browser using a java applet? I would like to access the serial management consoles of various hardware devices via browser.
View 1 Replies View RelatedI was given the responsibility at work to upload some files to an offsite 3rd party FTP server. Apparently we use a "secure" proprietary web-based java FTP client.
The FTP client was buggy and repeatedly crashed. While I was waiting for it to work, I decided to look at the HTML of the website when I was logged in to their FTP server. It contained the following lines:
Code:
hostname="-------------"
username="--------"
password="--------"
connectionType="ftps"
mode="binary"
enableHost="false"
enableConnectionType="false"
enableAnonymous="false"
I substituted dashes for the sensitive information that was in the website. I do not have access to analyze the network traffic to see if our username and password is being transmitted in plain text to the website. It makes me nervous to see the username and password plainly written out in the html for a website; however analyzing the network traffic and securing networks is not part of my job description. So my question for people here who have this as part of their job description is as follows:
Groovy is an object-oriented programming language for the Java platform. I do not have experience in Java, only perl and shell scripts. Recently I have been asked to maintain a software written in groovy (also to make enhancements). So can I learn groovy without knowing java language. or isit I have to learn java before venturing into groovy.
View 1 Replies View RelatedI'm having trouble with my java, I got it to isntall, restarted but when I go to any java based chat, or drawing site it doesn't load the applet, the applet shows up it just says "Start: Applet not initialized"
Did I install it wrong?
Is there any way to filter the output of a command based on the values on the output columns. For example i execute du -h on directory with many files. Now I want to filter the output based on the size (i.e. M or G or K ). The filtered o/p should contain only M(megabytes) or G(gigabytes) and also all columns.
20K ./fload/temp/20000101/Pam
15K ./fload/temp/20000101/NAVEX
29K ./fload/temp/20000101/Avenge
[code]....
I have a folder named Pictures that contains a bunch of .jpg files. My problem is that they all have randomly numbered names, then there is a duplicate of the file that is random numbers then the letter a right before the .jpg.for example, there would be 123.jpg and 123a.jpg, where 123a.jpg is just a resized version of 123. What i'd like to do but have NO clue how to, is to have a script or something go through my Pictures folder, then copy the ones that end in a.jpg to a folder called Resized, and ones that dont have that to a folder called Originals. That way my Pictures folder will be in tact, and i'll have copies of them all separated out.I have to do this all through the CLI on a machine, maybe I dont even need a script and can just do it with a slick command?
View 14 Replies View RelatedIs there any API to get partition name based on file path in C on Linux OS?
View 1 Replies View Relatedi have a question in my mind.sorry if its irrelevant to this topic.Can i run bash script (which i currently run on cygwin) in linux based web hosting?
View 2 Replies View RelatedI have a LAMP based web hosting account (BlueHost). I have an existing simple MS Excel application which I would like to make it web based. However I am not sure what tools or features of PHP are out there that will aid me with this task. Here are some details:
1. I don't want to create an entire Excel program online. For that there are plenty of existing applications like Google Docs, MS's own online version of Excel, etc.
2. My current excel file uses some of the following excel functions:
a) SUM
b) Product Sum
c) Conditional Formatting (like changing font color if an amount is below a threshold, etc.)
d) Sorting (Date, Amount)
e) Drop Down Box to select pre-defined values
3. Ability to add/delete/modify a entry (row)
4. I don't care whether the application has the same look-n-feel as MS Excel.
As you can see it is a very simple home grown excel application with few basic mathematical functions. Here are some few thoughts that I have currently in my mind:
i) Just start coding intuitively as you would develop a normal web based application.
ii) Do (i) but use some of the PHP's excel oriented helper functions (COMs?) if there are any
iii) Use completely a different set of tools permitting that they run on LAMP environment.
I could have started with (i) but before making a costly mistake I thought I would get some opinion from the community to see if this is the right approach.
I need to launch programs in my program and the program can be a script, a Linux executable or even a Windows executable. The first thing i tried is to use xdg-open from my program, but i can't pass arguments to it, otherwise it would have worked perfectly. Is there maybe a way to determine which program is set as default according to the mime-type of the program i want to launch? I also tried kfmclient and gnome-open, they don't allow arguments either.
View 2 Replies View RelatedOn an Ubuntu Server I am running, I wrote a small Ncurses program in GCC. It worked just fine.
Then, I copied the executable over to my Ubuntu 10.10 desktop edition with sftp. No matter what I did, it kept giving the error:
error opening terminal: xterm.
I had copied other non-curses programs and they all ran just fine.
Finally, I copied over the source, recompiled with GCC and voila, the executable now runs fine.
I want to select the branch based on the INPUT. Here is the program segment which uses the case statement.
case $INPUT in
1)branch="Computer Science";;
2)branch ="Electrical";;
3)branch = "Mechanical";;
4)branch= "Aerospace";;
esac
When I run this script, I am getting an error, Electrical command not found?
Since I'm not building a specific piece of software but a shell script, I hope this is in the right forum. At work, we use RHEL for the basic system but have Windows clients attached as well. On the Win side, there's a program that I'm trying to duplicate on the Linux side. Because of established procedures, I can't change the way files are named so please don't suggest I do that (my boss would not be happy). We have files stored on an NFS share we manipulate on either side.
The program is used to copy files from one directory to another, based on the filenames. The first two characters of the filename are ignored (they're for human-readable sorting purposes only), the next four characters are the time, and then all characters after that are ignored. The time is read and the file gets copied at that time. (This was all done in VC++ many years ago, and nobody knows where the source code is.) For example, a file named 2d0730abcd.txt would be copied from the source directory to the destination directory at 7:30am.
It seems to me that it should be fairly straightforward to build a shell script on the Linux side to do the same thing, but darned if I can figure out which magical combination of commands to use. Would the shell script end up creating a giant pile of AT commands?
in the access logs i have this:
Code:
IP.IP.IP.IP - - [01/May/2010:11:21:10 -0400] "BIG STRING" 414 250
how can i grep and pull the IP based on the request string?
What I am attempting to do is rename some television shows into the format that my PVR will understand for the naming convention. I have a script that cleans them up about 95%, now I just cant figure out the last little detail..
For example: NCIS_01.mkv
I think it can be done in sed, but I just figure out how. I need it to be renamed to: NCIS_s01e01.mkv
How can I make sed (or something else) match the last "_" and any numbers after it until the period and then insert text between them reliably?
Depending on the show, it can be something like: This_show_name_243.avi so I need it to be more flexible than I can figure out how to do..
I have a directory with some data files in it. I did an md5sum find, and built an index of all the files contained:
Code:
find ./* -type f -print0 | xargs --null md5sum > MD5SUM
Now, based on my new index, I want to find the copies of these files as they appear in a new directory, where they have been renamed and reorganized.
I was hoping to get some pointers on how to rename files based on database entry. I got hundreds of thousands of files that has GUID name assigned to it. only way to find out the file name is to look up the database table. Its obvious that this is not efficient. I couldn't find any tutorials on how to do this. Please point me to right direction. A starting point would be very helpful.
View 1 Replies View RelatedI a csv-file (A.csv) with a total of 4.600.000 lines. Thats to many and only a few is necessary. I have a txt-file with 150 lines (X.txt) (all lines is dataset from a mainframe and looks like abc.def.123.456. How do I remove lines from A.csv where none of the dataset from x.txt is present?
View 13 Replies View RelatedI have a single directory of pairs of files, with the pairs sharing a string as the beginning of the filename:
SF1-27F1492R-clone01_T3_A18_001.ab1
SF1-27F1492R-clone01_T7_A20_002.ab1
SF1-27F1492R-clone02_T3_A19_003.ab1
SF1-27F1492R-clone02_T7_A21_004.ab1
...etc
I need to create a subdirectory for each pair then move the pair into the subdirectory.
I accomplished the first step using:
$find /foo -name '*T3*' -exec mkdir '{}.wrk' ;
I can use a regex to designate the pair and associate the directory, but how do I use regex in a path as the output of a move command?
Originally Posted by Kenny_StrawnPlease wrap [CODE] tags aroung any code posted here. The full source that way could still be posted.I am trying to copy all the files in the directory based on the modification date (i.e created on Dec 29). Not able to find the proper command for this. This is what I have tried.
(none) login: root
#
# cd /mnt/hd/
[code]...
Is it possible to create a text based menu layout in bash were it is possible to browse through. The menu list should look something like this:
----------------------------------------
user: root
colour: blue
number: 4
animal: dog
----------------------------------------
At the start the cursor should blink at the r from root so that text can be entered. When pressing the enter the cursor should go to the b from blue and so on. the imported thing is that all the text is visible also beyond the position from the cursor.
I need to control matrix 5x4 keypad, on a processor
i am doing by making one row low at a time, and keeping all other rows high,
by scaning coloums, the corresponding key value becomes low.
my problems is that it is taking much time to respond, like to make gpio
low to high and high to low...
I have multiple HTML files in a folder. there is a <h2> tag like this:
Code:
<h2>some text</h2>
in each file. I want to write a shell script/batch file to add this tag in <head> section of each file:
Code:
<!-- TITLE= "same text from h2 tag" -->
Note that <h2>some text</h2> in some files has 1 or more linebreaks and so I couldn't capture tag content using a simple grep or...
for example:
<h2>first part of text
second line of text</h2>
The line break shouldn't be shown in <!-- TITLE= "same text from h2 tag" -->. The script has to capture tag content & skip line breaks.
how to implement this.
View 3 Replies View Related