I need to make a daemon which listens to port 81 for messages like [URL] So far I made a daemon which serves as a simple stream server: I set up a socket to listen to a non-reserved port (like 9999), but I don't know how to read the query strings.
Linux distro: Kubuntu 9.04
Language: C
iam just trying to connect to server which accepts one client and server will read(blocking operation) infinitely, but After closing the client socket the server "read operation" is returning zero and "errno variable(in errno.h)" value is also zero. how can i detect whether a client socket is closed/active..?
client.c
Serv_Addr.sin_family = AF_INET;
Serv_Addr.sin_addr.s_addr = inet_addr("127.0.0.1");
Serv_Addr.sin_port = htons(26553);
if( 0 > connect (Serv_Fds,&Serv_Addr,sizeof(Serv_Addr)) )
{
perror("connect");
return 0;
[Code]....
i'm writing a simple program of client socket program. Here below is the code sample which i'm writing...
Code:
//tcp_client.c
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <netdb.h>
#include<string.h>
#include<stdlib.h>
[Code].....
the above code works fine.if we copmile and run ./a.exe 192.xx.xx.xxx 1111 and press enter it works fine..everytime it asks "Please enter the message: " and if give that will be displayed in server. but my problem is i dont want to print everytime "Please enter the message: " i just want to feed some words one by one to the socket.
im getting that error in my code for some reason. I compiled my code, and when i try to run this server it throws me an error on my call to setsocketopt(). The only way it can reach that part of my loop is if it succeeds when it calls sock() so I dont understand why the error says its an operation on a non-socket. Im just trying to set up a server to pass messages from a client to it a viceversa. Here is the code:
Code:
int main()
{
int socket_fd, new_socket_fd, k;
struct addrinfo hints, *server_info, *p;
struct sockaddr_storage peer_address;
code....
I want to search and replace strings in a file with strings in other files/i need to do it with big strings(string1 is big) and i want to use a txt file for this.But this code not working :
View 14 Replies View RelatedI am having a lot of problems trying to change one string by another using sed: the sentence is like this:
sed -i 's/KERNEL=="tty[A-Z]*", NAME="%k", GROUP="uucp", MODE="0660"/KERNEL=="tty[A-Z]*", NAME="%k", GROUP="uucp", MODE="0666"/g' 50-udev.rules
it is just to fing the line with:
KERNEL=="tty[A-Z]*", NAME="%k", GROUP="uucp", MODE="0660"
[code]....
I wrote this small program that will truncate a string that's entered in by the user.An example of its usage:if the user enters in a string say "abcdefghijklmnopqrstuvwxyz" the program will only take the first 9 characters and truncate the rest so that the user can be prompted for a second string and not be worried about remaining characters left in the stream.Now this program works O.K. but I would like to find something in C that has this functionality build into it...Does anyone know of any function that will accomplish this.
View 1 Replies View RelatedI am trying to replace a section of a file between the first instances of the strings {}, with the contents of another file. Example of the format of the file I'm trying to modify
Code:
Servername=something.com
hosts {
macaddress1
macaddress2
[code].....
Then captured all the "macaddress#"s to a variable and used sed to swap
sed "s/$CURRENTDATA/$NEWDATA/" filename
However I get 1 of 2 errors,
Using a small number of macs in "$NEWDATA"
sed: command garbled: s/ macaddresshere
Or when using a large number of macs in the $NEWDATA variable get
bash: /usr/bin/sed: Arg list too long.
how to replace a large block of txt in one file with another large block from another?
I use udhcp with some of my minimal installs. I've messed around with the code a bit when it wasn't working correctly - a few years ago. I will find time - I hope soonish - to figure out how to do a few other things with it.
For now though, I'm using this string to grab my ip after startup
Code: Select allsu -c 'ifconfig eth0&&ifdown -a&&ifup lo&&ifup eth0'&&/sbin/ifconfig eth0
I realize I could substitute ifup -a but I'm more interested in figuring out how to make ifup wait for the ip to become available if it is not available yet.
Never mind that one, just typing out the question answered it for me, when I find it in the scripting man ' ; : " & =
Or if there are any other suggestions for better construction of the string.
I have a PHP script written that is checking a string to see if it contains a link in it (i.e. a URL). I have the following if statement, that uses 3 possible regular expressions to determine if there is a link or not.
Code:
// check if we found a link
// links are denoted by strings that:
// - contain http://
// - contain www.*.*
[Code]....
I'm not convinced yet that writing a shell script to do this is the best course of action. If someone is capable of doing this with a Perl or a Python script that's fine too. If you want to make it super high performance and write it in assembly
what is the best command to use to parse strings?I have a variable $str and need to parse this string.Can you provide an example of the command used to get a substring of $str based on the index values of start and end
View 3 Replies View Relatedi have an sql table with 2 columns i run a script that randomly selects a word from the table in column 1.
the word is displayed on the screen and I guess what it means i concatenate the randomly selected word and the answer the script looks for a match in mysql if it finds a match it says "Good job!" if there is no match it will say "not correct". However when i get it right it says not correct even though when i echo the variables they look exactly the same. the script below:
#!/bin/bash
var=$(mysql translator -u root --password=*-N<<EOF
SELECT word FROM tagalog ORDER BY RAND() LIMIT 1
EOF
)
[Code]....
Using the regex.h functions, how do you:
1) get the matched strings?
2) get the strings that matched sub-expressions?
it is about 'strings' binary from binutils. I recently wanted to test what it does and how it works. The best I did was this:
Code:
#!/bin/sh
PROGRAM="
int main()
{
[code]....
Ok, from the output I don't get it.Can someone show me in a simple script, what is 'strings' good for ?
I have a set of numbers under some headers in a file:
FNUM,BNUM,C1N,C2N,C3N,C1S,C2S,C3S,
4535, 109, 5.5955, 5.6523, 5.8084, 311.419, 295.2540, 286.9984,
4536, 109, 5.7667, 5.7174, 5.6771, 291.782, 285.0646, 271.5945,
[code]...
I have a function that retrives text between title and links tags from an XML file, but what i want is to test if the title and link tags are between item tags. This is my code:
Code:
istringstream iss(content);
string line;
[code]...
if I'd a file like this
something
somethine123
begin something end
begin xyz end
somethingelse
and I want to find the strings only between begin and end, exluding begin and end; How can I grep that?
I am trying a search for a pattern in the file. I can have any character in the pattern. I am pretty sure I will have $, ", ', ^, ` etc., The Problem I am facing is if I use "" (double quotes) to enclose the pattern, it gives special meaning to $, ^ and " within the string. I have no control over the pattern input. I am getting it from some other file. On the other hand, If I use '' (single quotes) to enclose the pattern, it gives special meaning to the ' (apostrophe) within the string and terminates the pattern prematurely. How do I disable the special meaning these characters have? For example, in perl, I could enclose the pattern within Q and E. Is there an equivalent in grep pattern expression? I could find one in the man page of grep. Is there a solution to this problem?
View 5 Replies View RelatedI have an interpteter that supports string literals, and the way it works is that the lexer returns the entire string as a single token, with the quotes removed and escape sequences replaced with the literal characters they represent.
I already implemented single-quote strings, they don't interpret any characters specially except for the single quote. I partially implemented double-quoted strings, they already support all the same backslash escape sequences that C does. But I would also want to add variable substitution.
The way it would work is that "${expression}" would interpret the expression (which could just be a variable name) and replace itself with the result. But I have no idea how to do this.
In case it matters, I'm using a hand-written lexer and recursive-descent parser.
I have that script that checks the nfs mount points:
Code:
#!/bin/ksh
#set -xv
test="DO_NOT_DELETE"
rc=0
[Code]....
I am no expert in loops and it took me all day to write that. I couldn't really tell how to match the string in $df_file and $fs_share, so I did a little workaround with a count.
I was zsync-ing the latest Ubuntu 11.10 Alpha and thought I'd make a little GUI for it as a small project. The gui is set up, I just need to figure out how to run zsync with content from to variables, cto and cfrom. I tried the following code:
[Code]....
...and returning the index of the found element in its array.
I have:
for ((i=0; i < ${#array1[@]}; i++)); do
# Read each line of the file test
if [[ $(eval "sed -n '$(($i+1))'p test") == *${array2[0]}* ]]
stuff
I want to find the index of the found substring in array2 and only if it isn't found, move on to the next element of array2. I don't know the size of array2 so that [0] has just got to go.
I have a server listening on incoming client connections. Once the client establishes SSL connection with the server, the server waits on read() from the client. Only Client can disconnect the connection. I want to have a timer in the server program to wait for x secs after read() and then disconnect the Client connection.
View 3 Replies View Relatedi have a server program which accept multiple client connection and am using polling. like every 2 secs it will look to client whether any data is received after it binded. i have used setitimer but there is runtime error i got.. the server accept all client connection but doesn't execute any msg which client sent.
#include<stdio.h>
#include<stdlib.h>
#include<sys/socket.h>
#include<sys/types.h>
#include<netdb.h>
#include<unistd.h>
#include<pthread.h>
#include<string.h>
[Code]....
i have problem in socket programming, while displaying received message in file,i got a problem... i cant able to write it in the file.... this is the code....
Code:
/* tcpserver.c */
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <stdio.h>
[Code]....
now my problem is run time error i can able to create file but i cant able to write file....log.txt contain nothing.... as here i have give sample code... dont say not initialising function and all.... i have initialised , please only see func1() - my problem is only not able to write msg which i got received from the client..
how to use socket programming in order to implement chatting feature
View 5 Replies View RelatedI have a directory of orchestral music .ogg files from a family member. Each track is from a different artist and the CDDB entry adds a ":" character after the artist name in the track title.
Here is an example of what I am referring to:
Code: Select all13_-_Mozart:_Sonata_in_A_major_KV_331.ogg
I would like to parse file names in any given directory and search for the string Code: Select all: and replace it with Code: Select all_ According to this post on stackoverflow, I can use Perl to accomplish this task. I've tried Code: Select allperl -i.bak -pe 's/:/_/' but since I am still learning Perl I'm probably commiting a PEBKAC error.
How would I go about solving this issue with regular expressions using Perl?
I'm trying to search for several strings, which I have in a .txt file line by line, on another file.
So the idea is, take input.txt and search for each line in that file in another file, let's call it rules.txt.
So far, I've been able to do this, to search for individual strings:
Code: Select allimport re
shakes = open("output.csv", "r")
for line in shakes:
if re.match("STRING", line):
print line,
How can I change this to input the strings to be searched from another file?
So far I haven't been able to.
How can i use different starting and ending delimiters in awk to search for strings or numbers like:
:string"another_string
'number+another_number
now i want string and number as output from above lines. But if i use delimiter as : or ' it will print the entire line coz second delimiter is not same as first one.
I am trying to develop a method of reading files generated by other programs. I am trying to find the most versatile approach. I have been trying bash, and have been making good progress with sed, however I was wondering if there was a "standard" approach to this sort of thing. The main features I would like to implement concern reading finding strings based on various forms of context and storing them to variables and/or arrays. Here are the most general tasks:
a) Read the first word(or floating point) that comes after a given string (solved in another thread)
b) Read the nth line after a given string
c) Read all text between two given strings
d) Save the output of task a), task b) or task c) (above) into an array if the "given string(s)" is/are not unique.
e)Read text between two non-unique strings i.e. text between the nth occurrence of string1 and the mth occurrence of string2
As far as I can tell, those five scripts should be able to parse just about any text pattern. I am by no means fluent in these languages. But I could use a starting point. My main concern is speed. I intend to use these scripts in a program that reads and writes hundreds of input and output files--each with a different value of some parameter(s).
The files will most likely be no more than a few dozen lines, but I can think of some applications that could generate a few hundred lines. I have the input file generator down pretty well. Parsing the output is quite a bit trickier. And, of course, the option for parallelization will be very desirable for many practical applications.