Programming :: CSS - Put Several Lines Of HTML Into One Line Using CSS?
Dec 14, 2008
I've got a website set up which has a section which is just a bunch of links on the side. But this section of links is on every page of the website. And when I expand and add more links I don't want to have to go to every page and add the new link. Is there a way that I could put all the links into something on CSS (or anything else) that I could just include one line in the HTML? So that when I add a link I'll only have to edit the one file and and then every page will be updated?
View 12 Replies
ADVERTISEMENT
Oct 11, 2013
I have a CSV file, which I created using an HTML export from a Check Point firewall policy. Each rule is represented as several lines, in some cases. That occurs when a rule has several address sources, destinations or services.
I need the output to have each rule described in only one line. It's easy to distinguish when each rule begins. In the first column, there's the rule ID, which is a number.
Here's an example. In green are marked the strings that should be moved:
See example. The strings that should be moved are in bold:
NO.;NAME;SOURCE;DESTINATION;SERVICE;ACTION;
1;;fwgcluster;mcast_vrrp;vrrp;accept;
;;;;igmp;;
2;Testing;fwgcluster;fwgcluster;FireWall;accept;
;;fwmgmpe;fwmgmpe;ssh;;
;;fwmgm;fwmgm;;;
What I need ,explained in pseudo code, is this:
Read the first column of the next line. If there's a number:
Evaluate the first column of the next line. If there's no number there, concatenate (separating with a comma) the strings in the columns of this line with the last one and eliminate the text in the current one
The output should be something like this. The strings in bold are the ones that were moved:
NO.;NAME;SOURCE;DESTINATION;SERVICE;ACTION;
1;;fwgcluster;mcast_vrrp;vrrp-igmp;accept;
;;;;;;
2;Testing;fwgcluster-fwmgmpe-fwmgm;fwgcluster-fwmgmpe-fwmgm;FireWall-ssh;accept;
;;;;;;
The empty lines are there only to be more clear, I don't actually need them.
View 1 Replies
View Related
Jun 6, 2011
I need a substitution of a particular string (StringA) with another string (StringB). However, there may be more than one occurrence of StringA within the file, but only one instance needs to be changed, which is why I'm trying to be sure of it's positioning against something I know will be unique in the file, and will always have the same distance from the string to be replaced. So, I intend to match on a string (StringC) above the string to be substituted and then have sed go to StringA below and replace with StringB.
So far, I have had some success with the following:
Code:
... but I can't help thinking that there *has* to be a cleaner way of doing it.
View 6 Replies
View Related
Sep 12, 2009
what is the best way (i.e standard way that is supported on all browsers and probably as well followed by web crawlers).... to include an html file either locally or externally in another ? Of course , i've done the research and i also know that there are server side includes (php , asp ...you name it) at the moment , i'm using this:
Quote:
<script type="text/javascript" src="path to file/include-file.js"> </script>
however, i've been warned that this method may not show up in some browsers as some tend to ignore this tag and that crawlers like your favorite search engine wouldn't bother reading this. so , what is the best and safest way to do the job? and btw , the reason why i've ousted SSI's from the start is because of among other things:
1) the fact that the included file is static html and because the text is included pretty much everywhere
2) hoping to reduce load time as the code (if successfully recognized) would hopefully be treated like any other embedded external file (e.x like an image) , therefore it would be cached without the need to downloaded it over and over again for each new page on the site.
View 1 Replies
View Related
Jul 2, 2010
i have two files with thousands of line, I am trying to combine these two files but i want to insert each line of one file to the another file after certain lines. I am using awk with the following command but it does not work.cat file1 | awk ' { print $0; if (NR%3004==0) {print "file2"}}' > outputfile
View 14 Replies
View Related
Sep 1, 2009
I have a dataset (see example below) that I would like to go through and copy all lines containing a certain string ("LGIG") plus the line immediately following that line to a new file. I have no problem grepping lines containing the string LGIG but I'm lost how to translate that to line number and shift up one line number for each instance of that string.
Example input file:
[code].....
View 5 Replies
View Related
Nov 24, 2009
How do you remove parts of strings using python? Such as, if I have something like:
Code:
erme1 sdifskenklsd
erme2 sdfjksliel
[code]....
View 3 Replies
View Related
Dec 8, 2010
When sending an HTML formatted email with KMail and viewing this email on an MS Exchange Outlook client, all the empty lines are removed. This appears to be a known issue (KMail & HTML. - KDE Community Forums), but I was hoping anyone here knows a workaround for this....?
This is REALLY annoying when using KMail in a business setting, since emails look embarrassing on a customer's email client (which is in 99% of the cases Outlook, I'm afraid).
View 9 Replies
View Related
Mar 22, 2011
I have two files, file1.traj and file2.traj. Both these files contain identical data and the data are arranged in same format in them. The first line of both files is a comment.
At line 7843 of both files there is a cartesian coordinate X, Y and Z ( three digits ). And at line 15685 there is another three digits. The number of lines in between two cartesian coordinates are 7841. And there are few hundreds of thousands of lines in a file.
What I need to do is copy the X Y Z coordinate (three digits) from file1.traj at line 7843 and paste into file2.traj at the same line number as in file1.traj. The next line will be 15685 from file1.traj and replace at line 15685 at file2.traj. And I dont want other lines (data) in file2.traj get altered. This sequence shall be going on until the end of the file. Means copy and substitude the selected lines from file1.traj into file2.traj.
I tried to use paste command but I cant do for specified line alone.
Here i showed the data format in the file. I used the line number for clarity purpose.
Code:
View 10 Replies
View Related
Dec 17, 2010
Kernel 2.6.21.5, Slackware 12.0 A command line html reader, or a conversion tool from html to text is what I would like to know if any of you guys knows. It has not to do a perfect job. And it would be nice if it is a native unix/linux program.
View 5 Replies
View Related
Aug 21, 2010
I have huge files, wherein some lines begin with a number. I want to convert that number to a bookmark link
Sample file:
Code:
C.S. Lewis (I think) wrote:
1 If war is ever
2 legal, then peace
3 is sometimes
4 sinful.
Text without numbers toom I need the numbers to be <a name tags where the id is the letter x and the number that is at the beginning of the line:
Code:
C.S. Lewis (I think) wrote:
<a name="x1">1</a> If war is ever
<a name="x2">2</a> legal, then peace
<a name="x3">3</a> is sometimes
<a name="x4">4</a> sinful.
Text without numbers too I'm not sure why I can't get this, but after hours of 3 line long seds and endless while read lines, grepping ^[[:digits:]]s I can't figure it out.
View 3 Replies
View Related
Feb 13, 2011
I want to access a file, and check the length of every line.After, i want to check and replace all lines with length over 10 characters, with a message.Does anyone have a clue on that?
View 1 Replies
View Related
Mar 13, 2009
I've spent a lot of time googling on this one, but could not really find anything that would convert HTML to images. Does anyone know if there are some command line tools that can do this? I need to convert simple HTML documents to images to be attached to Powerpoint presentations. Could firefox gecko be tapped into to do this without a GUI?
View 4 Replies
View Related
Aug 2, 2010
I need to add a line in a file before the last two lines using a script using standard linux editors like sed but i can't figure it out.
View 2 Replies
View Related
May 30, 2011
I am trying to write a program in C which compares two files and prints the line that is equal.
Here file1.txt has
and file2.txt has
Note: file2.txt consist of only a single string where as file2.txt has multiple lines. Actually im comparing two files with md5sum values.
Here is the code but it compares only first line of files..but it should compare the whole file1..and sorry iam a beginner in C can any1 sujest some modification to this code so that..it can compare file2 with entire file1
Quote:
View 9 Replies
View Related
Jul 25, 2011
I want to insert a line at a particular line number using sed or awk. where line number is not fixed and is in form of variable.
I want to use variable in sed or awk command.I tried something like below, but no luck.
View 7 Replies
View Related
Feb 14, 2010
I'd like to find a way of
1) capturing an RDF formatted RSS feed as a file on my computer
2) converting the result to HTML using local command line tools
I've sorted 1) with wget? I've discovered xsltproc but I'm going round in circles. The master plan is to import my pinboard bookmarks into a static web site produced on my linux box using a handful of clever bash scripts.
View 7 Replies
View Related
Feb 22, 2011
I've seen a few tutorials that have commands and parameters on multiple line, like the one below:
Code:
chkconfig --levels 235 mysqld on
/etc/init.d/mysqld start
I can copy and paste this in Putty, but what if I want to manually type it? If I press return, the first line gets processed, so how do I insert a new line?
View 4 Replies
View Related
Aug 19, 2010
I have noticed that there are some tiny white scanlines over the screen in linux, is this something known? specific graphics cards? just an issue with my setup?
Its hard to explain but its even horizontal scanlines, like small white lines over the screen, like every 3 line... was wondering if its my geforce 8800 or what it is?
View 5 Replies
View Related
Nov 10, 2010
I have a CSV file that's created in an application that can't output lines longer than 250 characters. the data fields, all together, are longer than this. how would I remove the line break from every line that ends with a comma? For example:
A,B,C
D,E,
F
G,H,I
becomes:
A,B,C
D,E,F
G,H,I
View 1 Replies
View Related
Feb 7, 2011
I have a file "test.txt" with following data
#1
aaa
#2
bbb
#3
aaa
#4
ddd
I wanted it to be displayed as
#1
aaa
#2
bbb
#4
ddd
I used awk "'!x[$0]++' test.txt > file.new"
,but it deleted #1 also.I tried using uniq command but i didn't work.
Can anyone Please let me know is there any way to do this using shell script.
View 2 Replies
View Related
Jan 20, 2011
I am doing molecular dynamics where I have to edit files. I have looked at tutorials for grep and sed but can't find my solution. The files produced in my simulations look something like this:
ATOM 1825 NE2 GLN 112 113.646 27.895 14.456
ATOM 1826 HE21 GLN 112 114.020 26.957 14.490
ATOM 1827 HE22 GLN 112 112.649 28.039 14.388
[code]...
View 5 Replies
View Related
Jun 24, 2010
I need to find a string in a file ... then delete the line it is on, as well as the next 6 lines. Or, delete the line the string is on and all subsequent lines until the search finds the character "["
example:
filename = test.txt
contents:
[foo]
test>test
test>test
test>test
[Code]....
so, in this example. I'd like to search the file for string 'foo' and delete all lines from that line until [bar] (not deleting the line with [bar])
View 3 Replies
View Related
Apr 27, 2010
I want to (from the command line) be able to counte lines in a bunch of files of a specific type in a folder and all its sub-folders. How would I do this?
View 1 Replies
View Related
Feb 3, 2010
I need to create a single line of output from multiple and variable lines of input in a Linux bash shell script.
My input file looks like this:
Where there may be any number of umsecondaryphonenumber lines; if there is not a umsecondaryphonenumber line for a telephonenumber, I don't want to write any output.
So, the output file should look like:
The script I have so far is:
My question is - how do print each of the elements of an array in one record - i.e. what do I put in place of howdoiprintarray?
View 2 Replies
View Related
Apr 11, 2010
I have a project due for my Intro to C++ class and we are suppose to generate a file listing that will take an input of a C++ source code with .cpp extension and make a copy of it with a .lst extention that will have a line number preceding each and every line.
View 12 Replies
View Related
Dec 29, 2010
How can I set indent in .emacs to enable my new line starts from the same position of previous line?
like this;
Hello world <enter>
Second Hello world // "S" starts right under first line's "H"
View 4 Replies
View Related
Jan 3, 2011
I wish to add information to one of my files based on matching IDs,
Here is an example
(the id is the 3 colunm)
(the ID is the 2 colunm)
And the output i wish to be
OUTPUT:
So as you can see the ones that do not match are still present, and the ones that do match just have the extra information from file2.txt added to them.
I thought about using join but that only seems to join the ones that match displays thoes only. i would like all the information in the output file.
View 6 Replies
View Related
Sep 12, 2010
I currently have 3 files with floating point data that I wish to have in a single file with the format:
Code:
F1 F1 F3 Output
a1 b1 c1 a1 b1 c1
a2 b2 c2 a2 b2 c2
a3 b3 c3 a3 b3 c3
a4 b4 c4 a4 b4 c4
View 3 Replies
View Related
Feb 28, 2011
At the moment I have a flat file which is being used by a few people. I want a script to remotely change the file, so I can start logging who is doing what.At this point here is one requirement I am trying to develop. We have text blocks who pretty much look like.I hope this is somewhat clear. I try to find $param for the right $workflow and change that. Can you help me to find $$var3 and change that?
View 1 Replies
View Related
