I like KDE4 but too bloated for my laptop... So I installed Xfce and it is awesome so the question is... Is there a way to delete KDE from my machine without accidentally screwing up my entire OS?
View 4 Replies
Like for instance, if I have Ubuntu Lucid Lynx installed with XFCE, and it has an applications made for XFCE. will the applications also work on say some other distro like, Wolvix, that is an XFCE-based distro~????
What I am trying to say is: Do applications that are made for XFCE, work on ANY distro that has XFCE installed?
Normally I install Xfce during installation time, but I deceided to try and add it to a machine 'after the fact.' This is on an OS11.2 machine with KDE as the primary DE.
When I select Xfce as the session I am receiving an error about: 'Unable to load failsafe session.'
xconfd is not running (D-Bus problem) or environment variable $XDG_CONFIG_DIRS is missing /etc or xcfe-session is not installed.
Before I go investing time to sort this out, is there a simple fix that people have used to correct the problem.
on OpenSuse 11.3 installed first KDE Desktop but my desktop Pentium 4 2.2Ghz is really slow... with XFCE work perfectly but XTerm is very poor. Cut and Paste text selection don't wok, like Mouse selection and font.
How improve features of XTerm XFCE?
I'm asking if it would be possible to run XFCE and Gnome 3 on the same system and if so how can I go about this in the correct manner?
My GNOME 3 repo is set to 98.
I'm growing tired of Gnome and KDE and wish to move towards a more lightweight and customizable interface. I chose Xfce. I downloaded all (I think) the packages related to Xfce but now I'm stumped as to how to actually run it as a default. I might want to try it a couple times first though. Is this possible?
View 2 Replies View RelatedI gave it 6 months, "Plasma" is still as disappointing as it was on day 1 :-( , even more so on SuSE 11.3, but I love the KDE apps. Any suggestions on a lightweight window manager (XFCE or Icewm) Don't care about effects, I like dark and minimalistic where I can define colours, window size and placement, before I rototill this installation.
Plasma has too many irritating features that I cant turn off, just too much like Windoze
Using XFCE with OpenSUSE 11.3. XFCE's Update Applet runs without superuser privileges. It finds updates without problems, but when I try to install them, it reports that it failed to authenticate or something like that. I have to start YaST Online Update module in order to install the updates. Is it possible to enable XFCE Update Applet to prompt for superuser authentication or to directly use YaST Online Update as panel applet, like in KDE?
View 2 Replies View RelatedI switched to xfce after repeated freezes in gnome-panel (2.28.1) due to unresolved 10-year-old bug (more than 8 applications when panel is vertical). My xfce (4.6.1) desktop comes without a shutdown launcher and ctrl-alt-del gives me a screensaver lock I tried adding a launcher, using
Code:
/usr/lib/xfsm-shutdown-helper
But when I restarted the system, I came up with a dysfunctional login panel -- no users shown.
When I click on "HELP" in some of the XFCE settings applets, I get an error. It looks as if the software is looking for the help under "/usr/share/doc/xfce-utils/" whereas the documentation is really stored under "/usr/share/doc/packages/xfce-utils/". I can add a symlink as a workaround. But before I do that, I thought I should ask whether there is a configuration file somewhere that allows setting the documentation path.
View 9 Replies View RelatedI have encountered a problem with an XFCE Launch Error. Upon first login, if I double click any Thunar related icon or try to launch Thunar from the menu, it will take 20-30 seconds to start. At first it was giving me the following Launch Error: "The folder could not be opened. Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." After successive reboots, I no longer get the Launch Error, but it still takes 20-30 seconds to start Thunar.
This is a new install of OpenSUSE and I did updates. The first two updates I did were required by the update software itself. After that was complete I updated the rest of the recommended packages. I then installed gnome-control-center to get gnome-display-properties so I can adjust my login screen settings. Those are all the updates I have done.
I have poured over other threads about the aforementioned Launch Error, and it seems possible that it is related to message bus security policy or gtk2 settings somewhere.
Is there a way to log XFCE errors or message bus errors to a file for troubleshooting? I would like to find out why and where this is happening.
Pressing the shutdown or restart buttons in XFCE simply logs me out and leaves the system running. I did some Googling and it was suggested that by default users don't have permission to shutdown. (not sure how this is a XFCE specific problem in that case but moving on...)
I've taken the following advice:
For a "desktop" system that wants to protect itself from casual attacks (and "puzzled penguins"), but still grant the user control of their system, run the following as "root":
USER=<your_userid>
polkit-auth --show-obtainable | while read OPT; do
polkit-auth --user $USER --grant $OPT
done
Where <your_userid> is the name of your unprivileged account. I wasn't entirely sure how to run it, so I stuck it into a shell script and ran that with the sudo command. Needless to say it hasn't worked. Is there an easy "sure fire" way to fix this problem, hitting the shutdown button repeatedly to test really grates on you after a while. BTW, Pressing the power button on the front of the system shuts it down okay.
I'm a new openSUSE user. Thought of giving some other distros a try, so I started with openSUSE.
I installed the Xfce packages and when I went to go install a panel plugin, it said that it needed to install some other stuff, including an update of xfce4-session to xfdesktop. After I did this, I could no longer see 'Xfce session' in the "Sessions" part of the log-in menu when I tried to log-in again.
What do I need to do to fix this issue?
some installed programs do not appear on the xfce menufor example imagemagick and evincemaybe one or two others have to check
View 9 Replies View RelatedI have a laptop that is a little bit older, and OpenSUSE was running pretty heavy on it with the KDE and Gnome desktops (I installed Gnome, tried it for bit, then wiped it and did a clean install with KDE).
Since it was so sluggish on that laptop, I grabbed a couple live CD's of OpenSUSE with the LXDE and XFCE desktop environments. The XFCE disc doesn't seem to boot at all, which I tried in a couple different computers, and on Virtualbox with the same result.
LXDE worked fine and I installed it just fine, with hopes of switching over to XFCE later, as I like it better. This brings me to my question, can someone tell me what the easiest way is to switch from the LXDE desktop to XFCE?
I found a page in the OpenSUSE site that appears to be dedicated to XFCE, here is the link:
Xfce - openSUSE
I went there, I clicked on 11.3 on the right hand side, and then clicked on the 1-click install option for X11fce, the first option. It opens the YaST software manager and I followed the prompts, and it finished. All of the packages were installed, except XDM.
I was expecting that the software would install and configure the desktop, and I'd reboot to see an XFCE login. This was not the case.
what the correct, and safe way would be to switch desktops?
Is there a GUI tool to change keyboard layouts in XFCE? So far, I haven't been able to find one. I'm using setxkbmap in console to change the layout. If there is no graphical tool, is there any way to make the setxkbmap change permanent so that XFCE uses the desired keyboard layout on startup?
View 1 Replies View RelatedHow to change desktop from GNOME to XFCE ?
View 1 Replies View RelatedAfter switching from KDE to XFCE, knetworkmanager doesn't automatically start when you log in. If you open it yourself, you magically get internet. How can I add KNetworkManager to the programs automatically started by XFCE?
I'm on 11.3
Operating system : OpenSuse 11.2
Desktop environment : Xfce 4.6
Kernel : Default
All other CD's do get detected on the above mentioned platform on my laptop, but the 4 new Audio CD's I've brought do not get detected there.
By detection I mean:
i. No icon is shown on the desktop.
ii. ls -R /media/ shows nothing.
Those Audio CD's do get detected on a different laptop with OpenSuse 10.3 with Kde 3.5.7 on it !!
Kindly let me know if I need to give more information regarding the above problem.
My default desktop environment is Xfce 4.7 (older machine). Monday I came back to work to discover a 17 GB log file in /var/log that ate up my root partition and gave me trouble running. I deleted it, which solved the problem EXCEPT that now when I boot, instead of the Xfce login prompt, I get an X-Windows login prompt. This takes me to a terminal (which apparently reads my .zshrc file), from which I can start an Xfce session by running xfce4-session. How can I get back to booting into the Xfce login screen?
View 2 Replies View RelatedWith a default 11.4 (64bit) install, selecting XFCE for the desktop environment I get the following appear in an "xmessage" window."GTK GUI wanted but not found, falling back to Qt".This appears whenever I click cancel in any YaST dialogs, the "Install/Remove Software" dialog from the XFCE menu.eg. Opening the YaST->Firewall dialog to check the current status of the firewall, then clicking cancelll show the "xmessage" window.Is this message harmless and my system is still ok ? It happens everytime with a XFCE install, I have reinstalled 11.4 several times to check
View 2 Replies View RelatedI'm using openSUSE 11.3 with Xfce 4.7.0 and I want to enable automatic login. What I have tried so far:
1) YaST -> User and Group Management -> Expert Options -> Login Settings. This didn't work because I have no "Login Settings" option in this menu.
2) Editing variables "DISPLAYMANAGER_AUTOLOGIN" and "DISPLAYMANAGER_PASSWORD_LESS_LOGIN" via YaST -> /etc/sysconfig Editor. This didn't work too and xdm was still asking about name and password no matter what I set here.
3) I don't know how to configure xdm, so I tried to replace xdm with gdm. Gdm worked, but application "gdmsetup" was missing from my installation (YaST simply don't offer this package) and I don't know how to set up gdm manually, so I ended without autologin again.
I use Xfce 4.I can not enable autologin.I make the necessary changes:
Yast
system
editor / etc / sysconfig /
desktop
display manager
and put my name in
DISPLAYMANAGER_AUTOLOGIN
code....
Is it possible to install Gnome-panel in Xfce? I'd like to completely replace xfce-panel with gnome-panel. It is possible the other way round so maybe this way too?
[url]
I tried xfce4-XfApplet-plugin but it doesn't work the way I would like to.
Deleted gnome completely after deciding on xfce.I am going directly to my login prompt on startup instead of going automatically into xfce desktop.What command do I use at startup to launch xfce? How do I get to go to xfce automatically on startup
View 4 Replies View RelatedI have installed Debian squeeze(testing) xfce. While I was changing selecting themes for the xfce window manager. It logged off and came to the login screen(gdm I think). On giving the username and password, it again comes to the same login screen. I can't get to the desktop.
View 14 Replies View RelatedI using Xubuntu 10.04 with Xfce 4.6.1 and i want to update an 4.6.2. After some hours of googling i find nothing... no way to simple update xfce official/unofficial repository for lucid not exist and basic way for update x/ubuntu from auto.
View 3 Replies View RelatedI don't think that the regular 10.10 or 10.04 repos have XFCE 4.8, so I was wondering if anyone has any information on a PPA for XFCE 4.8 or that.
View 9 Replies View RelatedI was ******* around with wine, and when i tried to run a certain game.... The xfce panel vanished! It's simply gone! Rebooting didn't help.... And when i tried running it from a terminal i got this:Quote:
/usr/share/themes/Murrine-Sky/gtk-2.0/gtkrc:45: Murrine configuration option "scrollbar_color" is no longer supported and will be ignored.
/usr/share/themes/Murrine-Sky/gtk-2.0/gtkrc:51: Murrine configuration option "hilight_ratio" will be
[code]....
I have Xubuntu with a minimal XFCE 4.6 installed. How to take a screenshot under XFCE?
View 9 Replies View Related
