OpenSUSE :: Format Drive With Newer Gparted Without Unused Space?
Apr 27, 2011
For a while now, I have been using an older version of gparted (0.4.5) from an older bootable Linux disk to format my hard drives. The version included with Suse 11.4 (0.8.0) has given me a puzzle. I tend to create a number of partitions (3 primary, an extended, and a number of logical) on my disks. For some reason, version 0.8.0 seems to requires 1 mb of space between each partition, and 2-3mb of space at the end of the drive. With the older gparted, I could create partitions with no unused disk allocation. Is there some reason for this new behavior? Is there some way to format a drive with the newer gparted without unused space? I realize that 10-15mb of disk is fairly small, but I have this dislike of wasted space. The drives being formatted are SATA drives in the range of 250gb -750gb.
I have a CentOS 5.3 x86_64 system setup as a file server, backup server, and iSCSI target. The physical machine has six hard drives, two of which (bay0 and bay1) are 1TB disks in a RAID1 mirror. Therefore, CentOS is installed on /dev/sda. My question is this: how can I format and mount the large portion of sda that's not in use right now? Here's some more info:
Disk /dev/sda: 999.6 GB, 999653638144 bytes 255 heads, 63 sectors/track, 121534 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
[code]...
As you can see I've got about 1TB of space on sda. However, when I look at my df -h command and my LVM management what I find is that I've got:
root / filesystem = 8GB and is under Vol00 swap = 2GB and is under Vol01 /var = 2GB and is under Vol02
Sounds like I have a ton of space on sda that I'm not using. It also looks like I'm using LVM, but I'm not familiar with LVM nor am I really comfortable with how I can use the rest of the 900+GB I have available on sda. how I can format and mount the rest of the free space on sda?
I have logical partitions on my drive numbered /dev/sda5 through /dev/sda14.I want to reclaim unused space from one of the partitions in the middle /dev/sda7. First I intend to resize /dev/sda7 by leaving the beginning of the partition as is and shrinking the end to create some unallocated space between /dev/sda7 and /dev/sda8. Then I would like to create a new logical partition in this unallocated space. My question is what will be the device name of the newly created logical partition? Will it be /dev/sda15 (I hope)? Or will it be /dev/sda8 and all partitions after this be renamed?
The GParted manual states that if a partition is deleted, all of the following partitions will be renamed, but it doesn't say anything specifically about renaming partitions after adding a new partition in the middle of a partition table.
i am running xubuntu 9.10 and can't format any usb drive (tried few of them). The same issue i had with fluxbox mint 8 (based on ubuntu 9.10) I thought that my usb drives are dead, but after formatting it in windows xp, i could run from them any linux distro. I installed then mint xfce 6 (ithink based on 8.10) and crunchbang based on 9.04, and had no such issues. But now i am back on Xubuntu 9.10 and want to make all live usb within it. At the end of formating process i have message something like: cannot mount usb drive: The enclosing drive for the volume is locked. Of course, no drive is locked. After that i can start making installation usb disk, but after some percentage it reports some error, and of course, it does not work.
I am pretty new to Ubuntu and am practicing on an old desktop as a file print and domain controller for a work from home business while I build and configure a Linux server. My question is as follows: I have a laptop running windows 7, my wife has a MacPro running Snow Leopard, the kids have desk top running Ubuntu 10.04, I have a 500GB additional disk in the spare desktop which I want to use as a netork drive that will:
1) Win 7 backup location from the Laptop 2) Store backups of large photoshop files and other graphicsy type stuff from my wifes macpro. 3) Act as a shared directory for all of us 4) Store large multimedia files, mpegs etc
What is the best disk partition format - Am I restricted to NTFS due to the requirements to store Win 7 Backup files Secondly can anyone point me in the direction of a URL for getting the Samba permissions sorted for Windows 7, The kids PC dual boots Win XP and Ubuntu 10.04 Win XP is no problem to network but in Win 7 I can see all the shares in the network map but I always get permission errors both from the Ubuntu PC and Win 7 laptop. Most of the help files and manuals deal with 98/Me/XP and not windows vista / 7 that I can find.
I just installed Fedora 12 in a laptop with a big hard drive and used LVM for it. The thing is that I used just a fraction of the LVM total size to create the "/" partition and decided to leave the task of creating the other partition (the data partition) with the rest of the LVM space after F12 got installed. Unfortunately I found that Gparted is apparently unable to perform that task of creating a new partition in unallocated LVM space. Is there any way I can create a new partititon in that unused LVM space?
I seem to have a strange problem with disk usage on my linux partition. I just upgraded my 10.04 to 10.10 and I'm not sure if this was there before.My nautilus tells me that I have 1.4 GB free on my linux partition. My partition editor (GParted) tells me that 79.31 GB of my 81.38 GB is used, and I've 2.08 GB free. There's no way I've got that much stuff on my linux partition, and to confirm it, I ran the Disk Usage AnalyzerApplications/Accessories), and the total size of everything on that partition amounts to much less than 10 GB.
I've tried deleting all my trash (both root and user trash) and I looked at all the folders trying to find any suspiciously large ones to no avail. I thought it might be some weird bug, but removing some files, added the correct amount of space to the free space detected by nautilus. I have no idea what eating up my disk space.
I'm trying to Dual-boot Windows and Ubuntu. I have Ubuntu now. I'm trying to remove space from the Ubuntu partition(Active) but, it won't allow me to remove space from active partitions. I have 11GB Free according to GParted, yet during the installation it displays only 8MB Free. Oh, and I'm trying to install Windows XP through VirtualBox. Is that possible through the install CD? I've been searching and haven't seen anything about it.
My current pc running on LINUX raid 1 with both 80bg hdd, the /dev/md0 is growing. Either a) I need to create another mount point to utilise the space.How i do this ? OR b) Clone the existing 80gb with 250gb, so /dev/mdo got more space?
# df -k Filesystem 1K-blocks Used Available Use% Mounted on /dev/md0 20161084 15577508 3559440 82% /
I am using LVM2 and have shrinked my /home partition and extended my / partition but I'm not sure if I used all the free space when growing my / partition. How can I find out? I prefer using the terminal if there is a graphical way to do this but I would like to know both ways if there are two ways.
I am attempting to install the 64-bit version of Ubuntu 10.10 on my computer.I'm intending to dual boot Win7 and Ubuntu with one hard drive that came factory partitioned into two drives. Win7 was installed first.Ok, onto the issue. The Install is going well until I get to the Allocate Drive Space form (so almost right off the bat). I first created a swap partition within my "second drive" (really just a partition of the larger drive). This stalled out and I had to exit setup and restart the computer. Booted into Win7 to be safe and Win only recognizes the First Drive and no longer the second drive. So, I boot up the Ubuntu Install CD and get back to the allocate drive space form I see I have a (linux-swap) drive with the same gb space as before.
So, from here I create a partition within the "second drive" 20gb of ext4 type space. This does not stall out and creates a partition of 20 gb. But, now it says I have 175 gb of "Unusable" space. This is very unsettling and using the "revert" button does nothing.How do I fix this space so I can finish the install?[URL]
I am running 10.04 Lucid on a Toshiba Satellite A105. The onboard video is an Intel Graphics Media Accelerator 950. The issue is that when I connect it to my Panasonic widescreen TV (laptop is widescreen as well) the display is shrunk and has a lot of unused space on the sides/top/bottom. So like, if I wanna watch something from Hulu, I plug in the S-Video, and I can watch on the TV, but it's not using all the screen available... I have not found a way to resize the output so it fills the screen.
find out the available and consumed Hard Disc memory through c/c++ program .I am using Dabian linux 2.6 I am able to get the physical memory size information by reading /proc fileI need to get information of HDD memory throug c/c
In newer versions of Avidemux wrong parameters are set when choosing "Sony Playstation Portable" from the Auto menu. The PSP doesn't support more than 2 reference frames or 8x8 DCT Transform.
This is how you can fix it. Backup the original file
Code: sudo cp /usr/lib/ADM_plugins/videoEncoder/x264/Sony PlayStation Portable.xml /usr/lib/ADM_plugins/videoEncoder/x264/Sony PlayStation Portable.xml.org Edit the file Code: sudo gedit /usr/lib/ADM_plugins/videoEncoder/x264/Sony PlayStation Portable.xml Change this line
I tossed a 500GB hard drive into my machine (Ubuntu 64 8.10) so that I could back some files up. This drive when last used was part of a software RAID (no longer in use.) I deleted the partition that was on it, and tried to reformat using Gparted to ext3...but it won't work. The only error message I get is that it failed. Details do not provide any additional information. I went to the command line and attempted to mount it just to see what would happen, and I got this:
Code: ~$ sudo mount /dev/sde1 /media/backup1 mount: unknown filesystem type 'linux_raid_member'
Apparently, it still thinks it's part of the RAID. What can I do to erase and reformat this drive?
I need to format a USB pen drive. Reason is I have a Foxsat TV receiver/recorder. In Fat format it will only download programs less than 4GB. Apperently I have been told on a forum and have read it on the company site that if I have Linux I can format it to Extension 3. This will enable me to load of the recorder my programs. I am not sure how this is done.
I have a messed up system, or so I think. I have all sorts of partition issues that I just don't understand. I may have installed Ubuntu multipe times (GRUB show 5+ copys) along side my copy of W7. GParted show two Unused partition spaces, one massive on that it cant read completely (ntfs), a LinuxSwap, something called (ext4) and something called (extended).
What is going on? I recently deleted a virtual machine, but it looked like this even before this. How can I allocate all of my space only to W7 and one Ubuntu OS? Pic of GParted is attached.
I used to run Windows and Ubuntu side by side. I have removed Windows and only run Linux now. However, when I try to release the partitions for use with Linux, Gparted just doesn't give me the correct resize options. Have attached a file, so you can see my problem. I believe its because the /dev/sda4 drive is sandwiched between the two unallocated partitions, and I just have no option of resizing into those empty ones. I have tried formatting them, but it just won't play. Ignore the fact they have locked keys, I have been using the Live CD to boot, but this screenshot was taken from my normal login.
I have accidentally deleted the first booting parition (Windows 7) with GParted, so then I immediately googled and found an utility testdisk which has successfully recovered the parition and it can boot and be seen from linux again. Only Exception is GParded, which sees an unallocated space on whole disk from this point!
I found this post [URL].. which looks like solution, but I can't figure he count a number of sectors 978726293. 500107862016 / 978726293 = 510.978263885 what is near to 512 (sector size), but not equal. So I don't understand the arithmetic.
Well the title says it all. Royal screw-up! I accidentally formatted two Windows partitions inside a Pointsec encrypted hard drive using gparted from a liveCD (in USB). Is there a way to recreate these partitions? If not the whole partition, at least be able to recover everything inside My Documents.I ran TestDisk and it will not see any of the two partitions that existed in the drive.
So I currently have an issue with the 10.10 (64-bit) installer in that it does not recognized the Crucial SSD drive I have installed on my box correctly (long story and ultimately a separate topic but if anyone is interested). Initially I thought it was an issue with the hardware and RMA'd the drive however now realize that the likely culprit is the Ubuntu installer itself.
In order to test the rest of the hardware while waiting for the RMA'd drive I installed Ubuntu on a separate partition on the box and thus have a working secondary partition that I can boot from. From within Ubuntu it seems I am able to access/format the SSD correctly (using gparted); it seems that it is only the installer that cannot handle the drive...
Is there a way that I can install Ubuntu on a second partition from within Ubuntu itself?
I installed Ubuntu 9.04 on my laptop last week. I had it dual-booted with Vista, but when it became apparent that I would be using Ubuntu much more than Vista from now on I wanted to resize my partitions. Originally, Vista was ~180 Gib with about 100 Gib of free space and Ubuntu was ~ 40 Gib with about 5 Gib of free space.So all in all there was ~105 Gib of free space on my system.When I tried to resize my partitions from the Ubuntu live CD, it bombed out after it had already resized the two main partitions. When I rebooted, Ubuntu loaded fine and Gparted now says that it is 120 Gib, which is right but there is still about 5 Gib of free space.The Vista partition only has ~28 Gib of free space, so now I only have ~33 Gib of free space
I have 500 MB of unallocated space on my hard drive. I would like to create a new partition with ext 3. Unfortunately, gparted gives an error so I am wondering if there is a way to do this without using gparted.
I just added a 2nd SATA drive to my openSuse 11.2 desktop. What do I do now to partition and format? I want to partition some of the new drive for linux, and leave some of it unpartitioned for Windows (I dual boot). I want to leave my existing 1st drive as is. What tool do I use? How do I proceed?
I decided a few days ago it was time to reinstall ubuntu since Lucid looked fun and interesting. Everything went really well (my table functions even worked with no configuration!) until I decided I wanted to resize my linux partition so I could install a win 7 virtual machine. I had some issues getting gparted to let me expand my partitions into free space, so I started diking around with various settings commands and I managed to screw up my partition table badly enough that I needed to boot with the live cd. After a few hours in panicked trouble shooting mode, I finally got grub reinstalled and managed to boot things regularly. But now Gparted is completely nonfunctional; it shows the entire HD as unallocated and says "can't have partition outside of disk". Apparently one of my partitions is oversized.
Here's my output of fdisk -lu and sfdisk -d: sudo fdisk -lu Code: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5c5ef856 .....
