OpenSUSE :: Create An User With Yast Using Ldap?

Mar 28, 2011

If I create a user with Yast using ldap than at some later point delete that users ( also using Yast ) I cannot recreate a user of the same name until I have rebooted the machine, which seems a bit excessive ! Closing and reopening Yast doesn't work, it still thinks the users exists. Even though it doesn't appear in the Yast and if you look in the ldap browser it is gone. Is there something else that need restarting ( other than the whole box )

View 1 Replies


ADVERTISEMENT

OpenSUSE :: Ldap Via Yast - Ldap-sasl-interactive_bind_s - Local Error - 2

Jul 2, 2010

I took to yast to install ldap. I creating the CA cert, server key and server cert and specified them during the yast ldap server dialogs.

The firewall is open for ldap.

I also went through yast's ldap client ... though I didn't exactly see to anything (presuably it wrote up a configuration file somewhere).

However when trying use the basic ldap tools, like ldapwhoami. Well it doesn't connect and gives me the above error. Of coure the ldap db is unpopulated as yet, so it probably is not able to say who am at all. But ldapadd doesn't work either.

It seems to point to my SSL usage not being correct .. so I'm trying to double check that now.

View 2 Replies View Related

OpenSUSE Network :: Setup A LDAP Server Using The Yast-LDAP Server Configuration Tool

May 31, 2010

we have a weird problem with our opensuse 11.2 server installation.

We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.

This indeed already worked weeks ago until....this week.
Maybe some updates??!

I do not know what happend exactly. The server just does not want to start again and throws following error:

Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed

This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.

So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.

I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).

View 4 Replies View Related

OpenSUSE Network :: Kerberos + LDAP With YaST?

May 26, 2011

In the OpenSUSE documentation I red this very exciting chapter Chapter 6. Network Authentication with Kerberos That mentions "Using LDAP and Kerberos" which combined with NFSv4 would give my office net functionality of a M$ Win network.

We are still on 11.2 (we have no win clients at all) and I was testing different setups of 11.4 in VM, but I can't get YaST to configure the LDAP with Kerberos setup (our current setup does not use Kerberos only LDAP). Unfortunately I could not find any meaningful HOWTO on how to do it in SuSE. The page in docs involves editing config files, but I would like to avoid this, because from my former experience with Samba, as it would mean I cannot use yast anymore and that is sad.

Is there a way to configure LDAP + Kerberos (in terms of issuing of krb tickets at login) with YaST?

PS: I basically need Kerberos for NFS and Intranet site.

View 5 Replies View Related

SUSE / Novell :: SLES 10 SP2 Unable To Create New User From YAST / Way To Do

Mar 16, 2010

I am running SLES10 SP2 under z/vm in z9 mainframe box. But I believe this is a linux problem instead of hardware architecture or visualization (Because previously it worked).

I was trying to create a new user account for ftp purpose. However I encountered the following error from YAST code...

View 4 Replies View Related

OpenSUSE Network :: Can Make Yast / Ldap Accept Usernames That Start With Number

Mar 31, 2010

Can I make Yast/Ldap accept usernames that start with a number. All our current users have the format 09-first.last or 10-first.last etc.

View 2 Replies View Related

OpenSUSE :: YAST: Unable To Create Repository?

Jan 12, 2010

Why does this happen? I am (this time) trying to install Atmel's gnu-avr toolchain. Atmel's web site gives the repository as http:www.atmel.no/avr32/suse/11.0/i586. I put that into YAST2's repository manager, and it comes back with "unable to create repository from URL..."

Why does this happen? It's hardly unique to the Atmel repository: in fact, it seems to be YAST's default behavior on ANYTHING other than the official SUSE repos.

Is there some way to fix this, or bypass it with some other installation tool, so I can get the software I need?

View 6 Replies View Related

OpenSUSE :: Create Own Yast Repository Which Causes Clients To Refresh

May 11, 2011

I have written a script which builds a repository into a website document root and it seems to work OK apart from one little problem other servers which use that repository have set it to autorefresh, but they don't, I have to manually execute "zypper refs".how yast2 knows that a repository is out of date?

View 2 Replies View Related

OpenSUSE :: Yast Wont Start As Normal User ?

May 31, 2011

I am running 11.4 with KDE updated to 4.6.3 and suddenly I cant start Yast or Software Manager using kickoff. It doesn't even open the dialogue to ask for root password. I see Yast appear in the panel for 15 seconds or so then it just disappears without opening a window. If I open a terminal and su to root and run yast2 it work fine.

View 9 Replies View Related

CentOS 5 Networking :: LDAP User Can't Login Remotely By SSH On LDAP/Samba PDC?

Sep 8, 2009

I installed CentOS 5.2 and then run yum update. I configured this server as LDAP/Samba primary domain controller. LDAP seems to be OK and for testing I am able to create users with:smbldap-tools useradd -am usernameI can ssh into the server as root and also as a Linux user which was locally created in the server. But ssh into the server as LDAP user fails (from a Fedora 11 machine) with "Permission denied, please try again", prompting again for password.Some data:

# rpm -qa | grep ldap
python-ldap-2.2.0-2.1
php-ldap-5.1.6-23.2.el5_3

[code]....

View 1 Replies View Related

Server :: Apache Authentication: Allow LDAP Group OR User Named Guest But Not All LDAP Users?

May 25, 2011

I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.

This is the common part:

Code:

AuthType Basic
AuthBasicProvider ldap anon
Order allow,deny
Allow from all

This part by itself works for the LDAP authentication:

Code:

AuthName "System Admins"
AuthLDAPURL "ldaps://example.com/ou=ldap,o=example.com?mail" SSL
Require ldap-group cn=SysAdmins,ou=memberlist,ou=groups,o=example.com

This part works by itself for guest access:

Code:

Anonymous guest
Anonymous_VerifyEmail Off
Anonymous_MustGiveEmail Off
Anonymous_LogEmail on
Require valid-user

But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?

View 1 Replies View Related

OpenSUSE Network :: Create A Backup Ldap Server?

Apr 27, 2010

We have a ldap server which has been running for a couple years now, and I was told to make a fallback / backup ldap server. So should the old one fail we won't be officially screwed.

View 1 Replies View Related

OpenSUSE Network :: Add User From LDAP?

Jan 1, 2011

how to add user to my opensuse 11.3 box from a ldap server ? I used useradd but can't log in with the ldap credentials .

View 1 Replies View Related

Ubuntu Installation :: Cannot ID LDAP User On LDAP Client

Dec 2, 2010

I've setup an Ubuntu 10.10 LDAP Client to authenticate off my LDAP server. I've install the following: sudo apt-get install libpam-ldap libnss-ldap nss-updatedb libnss-db nscd ldap-utils pam_ccreds Here's my /etc/nsswitch.conf: passwd: files ldap [NOTFOUND=return] db group: files ldap [NOTFOUND=return] db

[Code]...

View 9 Replies View Related

OpenSUSE Network :: Get NIS Settings Back Into YaST "User And Group Management"?

Jan 18, 2011

After a disastrous foray into LDAP I restored NIS on a very simple network run by a very simple operator. Everything now works except for YaST on the NIS master. I can't manage NIS users in YaST any more. The option 'show NIS users' is now absent from the 'filter' button up in YaST "User and Group Management" So, after following the YaST route to LDAP there seems no way back...

These are OpenSUSE 11.3 boxes and the slave NIS server can't [obviously enough] delete expired NIS users on the master, although it sees them fine. Disabling or changing NIS server or client on the Master simply restores the 'wrong' settings - nothing is erased or cleaned. How do I clean up NIS controls so YaST sees it properly? or What do I need to do to restore NIS group & user control to YaST?

View 2 Replies View Related

Server :: LDAP User To NIS User Migration

Aug 3, 2010

get the steps for LDAP user to NIS user migration?

View 1 Replies View Related

OpenSUSE :: Unable To Create New User Account?

Mar 25, 2010

i m not able to create new user account to my new install of 11.2 don't know whether it occured due to update problem or some installation failure. when creation a new profile through yast it gives a warning sub-domain not started and quits however a new user get added through cli but with no profile of its own. that user cant log into gui enviroment and when he/she logs through cli it automatically tranfers it profile to "/"(i.e root) i m using kde4.3

View 9 Replies View Related

OpenSUSE Install :: Create User With Only Numbers?

Jan 20, 2011

i am trying to create some user with only numbers and i cant....

Opensuse tell me that i need that the user start with a letter or "_"...

How can i create the user!! i need

View 9 Replies View Related

OpenSUSE Network :: Create A Remote (ONLY) User?

Jun 27, 2011

I want to create a user on my opensuse 11.4 computer, for the sole purpuse of using it to access network shared data (eg samba, nfs, etc). This user must be in the "Users" group, but it must NOT be able to login directly on the computer, i dont want him to show up on the GDM users list at logon, he must not be able to login to a terminal, etc.

How can i add a user like that? must he belong to a specific group?

View 4 Replies View Related

OpenSUSE Network :: MySQL Create User/permissions?

Jan 13, 2010

MySQL gets installed with root user by default, root user can administer every mysql database installed in the system. Question is how to create a new user that will not be able to administer all the databases in the system the way as root user is? Can it be done using webmin?

View 7 Replies View Related

OpenSUSE :: Interface For Managers To Login And Create Proxy User ID's For External People?

Mar 3, 2011

Does anyone know what is the best open source proxy solution out there? What we need out of the proxy are the following: Access Control - There should be a web interface for managers to login and create proxy user ID's for external people Good password complexity requirement Lock down the allowed websites

View 1 Replies View Related

Red Hat :: Add LDAP User In Server?

Mar 2, 2010

Is it possible to add LDAP user from client to server, in Linux.


I am using RHEL5.0 LDAP server, also i have 10 clients (RHEL 5.0) machine also. I want to know "Is it possible to add LDAP user from client (export) to server".

View 1 Replies View Related

Security :: [LDAP] Account To Manage/create Only Specific Users?

Oct 19, 2010

Is there a possibility in openldap to allow a user to only create/manage specific LDAP users?For example user "mailadmin" may only create/manage mail accounts in LDAP that are named like "m1342895"? Or a specific list of user accounts that are in a specific group?

View 1 Replies View Related

Server :: [CentOS + LDAP] Create Home Directories On The First Login?

May 26, 2010

I noticed in Fedora that in Authenticate Configs ->Advanced, that there is an option to "Create home directories on the first login".I'd like to know if its possible to enable that through a text config file on a CentOS box that has ldap authentication enabled. Right now it's complaining that the home folder does not exist upon loggin with an ldap account.

View 1 Replies View Related

General :: Login As User Into LDAP Client?

Jan 26, 2010

I have 389-DS ( Fedora DS) setup on CentOS 5.3 and working fine. I configured LDAP Client and want to login as user created under fedora DS Client. From Client Machine, I can easily see:
Code:
[root@fedoraDS-Client ~]# id ajrain
uid=569(ajrain) gid=569 groups=569 context=root:
system_r:unconfined_t:SystemLow-SystemHigh

This is User from LDAP Server (fedora DS Server) which is showing in Client Machine. So It means its retreiving value from Server. Correct? Now When I am trying to login , it says "Server unexpectedly closed network Connection". When I supplied user password:
Code:
login as: ajrain
ajrain@fedoraDS-Client's password:

The File /var/log/secure says:
Code:
Jan 27 02:39:27 localhost sshd[3996]: pam_unix(sshd:auth):
authentication failure; logname= uid=0 euid=0
tty=ssh ruser= rhost=10.210.53.104 user=ajrain
Jan 27 02:39:27 localhost sshd[3996]: Failed password for ajrain from 10.210.53.
104 port 1241 ssh2
Jan 27 02:39:27 localhost sshd[3997]: fatal: Access denied for user ajrain by PAM account configuration

View 1 Replies View Related

Server :: How To Delete User Account From LDAP

Feb 4, 2010

I configured LDAP. But added a user mistakenly, how can I delete that user account from LDAP. How to create home directory for LDAP users.......

View 1 Replies View Related

Server :: Adding New User In LDAP Client

May 2, 2010

I am facing problem in adding new users in ldap server and client for a long time. I configure ldap server and client successfully and I can login the client machine by a user. User is created on server during configuring the server but after same time when I create a new user on server and create a home dir for the same user on client machine and assign 700 permission on home dir of same user and copy the /etc/skel/.* /home/user-dir and when run the command "#chown -R user:users /home/user" it shows invalid user error.

View 1 Replies View Related

CentOS 5 :: Ldap For Simple User Authentication?

Jun 22, 2010

I have a centos 5 system with openldap configured. I need openldap for simple user authentication. ie.. to be able to use it for authenticating it from remote applications and systems like mail clients...etc.

I was able to succefully install and configure openldap and ran a slaptest to verify the slapd.conf file for errors and found none. so now all i want to do is to add username and passwords to the ldap database.

iam just not sure what all objectClasses i need to use for Attributes uid and userPassword and what exactly should be the ldif file syntax for the above entries. I tried various sources but i do either get errors while adding or after adding do get errors trying to access it.

above all, iam able to access the ldap server from my phpldapadmin only as a anonymous user and not as a root user that i added as a first entry.

View 2 Replies View Related

Ubuntu :: Made An Error With Chmod - Create User But Don't Allow To See The Other User's Home Folder

Jan 18, 2010

I wanted to create an user but don't allow it to see the other user's home folder so I made chmod 0750 /home/folder and it worked fine so I went ahead and decided to completely forbid access to the root folder and I had the "great" idea to make chmod 0750 /, and now I'm having problems with wine and other applications, in example I used to have a folder in this address 209.239.114.51/mmgr but now it's giving me errors and if I try to run some applications I got error "There was an error creating the child process for this terminal"

View 9 Replies View Related

General :: Create User Add File With Default Password And Force User To Change It?

Feb 2, 2010

I want to add 50 new users, not on the server yet I want to add them all to group Accounting - with 1 option, not user by user I want to setup a default password for them all, and have it say something like 'You must now change password or no access will be permitted' Any other options I also want to do once, not for each user?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved