OpenSUSE :: Where Is SCPM Function In 11.3
Jul 19, 2010
I briefly installed OpenSuSe 11.3 64 bit on my Lenovo laptop last night only to find an app critical to me would not run with Crossover Linux Pro on 11.3, so I reverted back to 11.2
That isn't a problem for me. What I could not find in 11.3 was SCPM. I use my laptop quite a bit and used scpm to set the nfs network up for each different site I logged into. I did not see how to do this with 11.3, but assume I looked in the wrong places. how to do this with 11.3?
View 7 Replies
ADVERTISEMENT
Mar 24, 2011
I bought a multifunction stylus sx218 Espon model and I can not run the scanner function. I did some research and found a few solutions and very functional. I hope someone solves the problem. My version of openSUSE 11.2.
View 9 Replies
View Related
Mar 30, 2011
I'm currently using OpenSuse 11.1 web server. This is bad since 11.1 is no longer supported. the reason why I am using it is because Function set_magic_quotes_runtime() was no longer being used. (so I was told)
That being said, is there a way to get Function set_magic_quotes_runtime() to function on the newer versions of OpenSuSE?
View 9 Replies
View Related
Nov 16, 2010
Code:
#include <iostream>
using namespace std;
[code]...
View 1 Replies
View Related
May 18, 2010
I am doing some Linux kernel programming for my research project. I need to record the timestamp (by using cpuid and rdtsc) when an interrupt handler (top half) is first invoked. Due to the time critical nature of the problem itself, I have to do the timestamping inside the interrupt handler itself (the first operation when the handler is called). However, I understand that tasks that are not so time critical should be deferred to a tasklet function (bottom half) for processing because other interrupts are disabled in a (top-half) interrupt handler. I am currently out of idea on how I can pass the timestamp information that I have obtained in the interrupt handler to the corresponding tasklet function.
View 2 Replies
View Related
Feb 21, 2010
the function terminates if no key is pressed for 10 consecutive seconds. I tried using the -t option as suggested in some forums, but my version of showkey doesn't have the option of changing the timeout. The options I get are:
-h --helpdisplay this help text
-a --asciidisplay the decimal/octal/hex values of the keys
-s --scancodesdisplay only the raw scan-codes
-k --keycodesdisplay only the interpreted keycodes (default).
Is it possible to write a script to use this function and still keep the function active until an interrupt is recieved?
View 6 Replies
View Related
Dec 19, 2010
I guess I would have to use xmodmap to do this. I already used XEV to find out that the button I need changed was keycode 22. I have a Dell Vostro 1500 and I want the remote control to have a different function.
suse 11.3 / x32 / kde4
View 1 Replies
View Related
Jul 28, 2010
When I try to write email, and enter the first few letters of the recipient in the "to:" box, it sometimes but not always autocompletes. i.e., let's say my contact's name is Frederick, his address is e.g. robertsharry@snotmail.com. I enter Fred or fred or fre, a couple of addresses come in to the autocomplete drop-down, but not his. After searching all over over to find his address by other means, I start to write it in manually only to find that he IS in my address book (and also in recent addresses), listed under Freddie. I know that the word Freddie is not in his actual address, but what is the point of having a search function if you have to remember the address yourself? In other words surely the drop down search should show display names (as well as any other fields)?
View 5 Replies
View Related
Apr 9, 2010
OpenSUSE 11.2 installation DVD has many many applications that are installed by default.How can I install just the minimum for a working system. As an excercise I am trying to build a Nas system which I can install into our Windows Active Directory at work and have user access controlled via an Active Directory user group. I have no need therefore for so many of the applications available. I have tried uninstalling some applications and have managed to remove some features that I infact needed to keep.just a minor thing like the Gnome interface (gee!). Is there a list available of core applications required to function etc. that would help me to streamline my build?
View 9 Replies
View Related
May 23, 2010
setting up my LAMP server to send email messages through my cable network SMTP server. If you respond please realize that I am new to linux/apache. I cannot send emails out with the built in email server on Suse and don't even know if it is enabled. I used to do it with my IIS/ColdFusion server but there were options for the outbound SMTP server and authentication. I have searched and think I have to use something called Pear but to be honest the instructions are vague to say the least and it all looks greek to me.
View 2 Replies
View Related
Jun 20, 2010
I looked on the net for such function or example and didin't find anything, thus after having made one i guess it would be legitimate to drop it to see what others thinks of it.
#!/bin/bash
addelementtoarray()
{
local arrayname=$1
[code]....
View 10 Replies
View Related
Jul 20, 2010
Ever since installing 11.3, my Samsung CLX-3175 laser mfp no longer prints. It worked fine under 11.2 using the Samsung proprietary unified driver. That driver no longer seems to work under 11.3. The print job never leaves the queue and the printer must be rebooted (it is a networked printer) to be recognized by the operating system after deleting the job. Here is the relevant error printout from the cups error log from an attempt to print the test printer job:
[Code]....
View 9 Replies
View Related
Jan 10, 2010
My 785G motherboard comes with an integrated sound card. In the manual I see there is an option to install Dolby Software to make 2-channel stereo sources play to 4, 5.1, and 7.1. Is there any equivalent Dolby or other software for OpenSuse 11.2?
View 3 Replies
View Related
May 29, 2011
I've trouble compiling libeio on my openSUSE 11.4 x86_64:
[Code]...
View 9 Replies
View Related
Oct 26, 2009
I put together a step-by-step guide of how I installed openSUSE 11.1 on my ASUS Eee PC Seashell 1005HA Netbook. I planned on going back and re-installing using my own guide to check for mistakes, etc. but I never seem to get around to it, so I'll just post what I have and let you guys comment if you run into issues. Side notes: This guide assumes you want to wipe out Windows XP and run only openSUSE. Sorry, I'm a Gates hater.
I still haven't figured out how to configure the function keys support for volume controls and wireless. I'm hoping the "eeepc kernel module" mentioned by malcolmlewis here: Suse on my Asus 1005HA - openSUSE Forums will do the trick.
View 9 Replies
View Related
Mar 27, 2011
Since I changed my System from openSUSE 11.3 x86_64 to openSUSE 11.4 x86_64 my printer (Samsung ML-2850 via USB) seizes to function (clean installation). The printer connects to two machines via a KVM-switch. On the other machine (Windows 7 x64/Windows XP x64) the printer is working fine. This did not change when I switched the Cables/KVM-ports. In addition, when I was using openSUSE 11.3 x86_64 the printer also worked fine. All necessary CUPS-packages are installed:
[code]...
View 6 Replies
View Related
Nov 8, 2010
I am absolutely a newbe with opensuse so I hope I am posting into the right forum.I have php version 5 on my Server (openSUSE 10.3), but sadly without the "tokenizer" function. But I really need that. So how can I install this module via SSH?
View 3 Replies
View Related
May 24, 2010
I want to declare a function in a function, but had no success till now, see the error code below and visit the project at sourceforge
[Code]...
View 14 Replies
View Related
Aug 13, 2010
Yesterday I installed F13 onto a somewhat older machine of mine, to test out some software that I've been developing, and while it works quite well in general, there's a couple of situations where gtk+ seems to be incredibly slow. Most notably, that app lets the user click-and-drag a large map inside a scrolled window; the app updates the scrollbars appropriately. On F13, the click-and-drag starts to lag behind the mouse almost immediately. I had been developing this app on another distro (Gentoo) prior to installing F13 on the machine, and never had this issue then - I've even doublechecked by booting that box onto a Gentoo LiveCD and trying from there, and the speed of click-and-drag is totally fine.
Additionally, and possibly-related: the highlighting which follows the mouse around as you mouseover the map seems to lag behind as well. Otherwise, the system responds quite quickly. Now, the box is an Athlon XP 2100+ (1.73GHz) with an nVidia 7600GS (AGP) - I've tried using all three of nv, nouveau, and the binary nVidia drivers (both from rpmfusion, and compiled from nvidia.com), and I get the same lag using any of those X drivers. I've tried changing the desktop theme (in Preferences->Appearance) to some more "basic" themes, but that hasn't affected anything. I've also tried hopping into a very basic WM outside of Gnome (icewm) but the problem persists there.
Is there some kind of global "smooth scrolling" gtk+ option I could turn off somewhere, perhaps? Run into this kind of weird, selective gtk+ slowness before? I hadn't thought to try before, but I've just verified that I get the same behavior with the "vesa" driver. The system is otherwise snappy, but that click-and-drag is still horribly slow. I just tried it out on an Ubuntu LiveCD, and the speed is also totally fine on there. Just, you know, as one more datapoint. So I went ahead and put together a simple test-case which is removed from the actual application, and it still exhibits the same behavior for me. On Fedora 13 it's quite laggy, on other distros on the same hardware it's totally fine. [URL]
View 3 Replies
View Related
Jun 4, 2010
I have a question about calling an asm function from C....It doesn't work unless I create an asm variable to hold the value of the function in....Why?Here's the code that doesn't work...
asmfile.s - version one Code: .section .data
mydata: .ascii "this is the message!
.equ mylen, . - mydata
[code]...
View 2 Replies
View Related
Jul 23, 2010
I want to use backtrace() function to debug a crash issue. I tried this sample code to see how backtrace works. backtrace() function always returns 0 with the below code. Is there any kernel configuration that needs to be set for proper working of backtrace?
#include <execinfo.h>
#include <stdio.h>
#include <stdlib.h>
/* Obtain a backtrace and print it to stdout. */
void
print_trace (void)
[Code]...
View 2 Replies
View Related
Mar 29, 2010
I am developing a function say my_abc() which does the same thing as kernel function abc(). Now I want that instead of using predefined kernel function kernel starts using my function. It might be possible that the kernel function has been used so many places.
View 7 Replies
View Related
Aug 17, 2010
I have been looking around and haven't found a way to use the cluster function in dvd::rip and was wondering how to use it all i could find was it said open ssh but what is was looking for was away to use my desktop as my master node and as a file server and make my netbook with the intel atom n270 a slave node if anyone has an idea of how to do then please let me know.
View 2 Replies
View Related
May 30, 2010
Can you offer me the code about fmod() in C. I want to know how this function work, i am very interested in it because i have no idea to implement it, i want to know... how to write the function... not 'how to use the function' can anyone post the source codes of this function here?
View 6 Replies
View Related
Jul 5, 2010
i have an open source application that was developed in C++ (it uses objects and namespaces all over the place). I also have another application that was developed in C. Now i am trying to insert the code made in C into C++ application, but when i do that , i get this error on compilation of the source code:
Code:
error: 'mpi_init_vars' was not declared in this scope the function mpi_init_vars() is not part of object oriented programming and it doesn't belong to any scope, it was compiled into an object file and i am linking it with all objects of C++ application.
How can invoke the C function from C++ object oriented code?
View 2 Replies
View Related
May 2, 2011
I am trying to build a function inside a script.
Code:
#!/bin/sh
#System commands and other configurable.
IPT=/sbin/iptables
IP6T=/sbin/ip6tables
IPST=/usr/sbin/ipset
MODP=/sbin/modprobe
GET=/usr/bin/wget
INT_NET=192.168.1.0/24 .....
I can find lots of tutorials in how to use if, then, else. However, how do I define a variable inside the function?
SEE>>
Code:
for c in $ISO
Also, am I using the 'test' command correctly( -/+ week as valid test)?
View 7 Replies
View Related
Feb 7, 2011
I am doing a web site program and what I need is to call a C program in the PHP cloud.Do u think it would be possible? The web site would get the user input from PHP UI and pass to the C program , the C program would process the function with the user input and output the a PHP page.
View 2 Replies
View Related
Jan 4, 2011
I ask if a c++/c function is able to know its name from inside itself:
example:
Code:
int funct1(int a,b)
{
printf("%s ",funct_name());
}
or with a trick.
View 2 Replies
View Related
May 30, 2010
Code:
#!/bin/ksh
(...)
# FILL UP PARTITION
diskfillerfunction () {
[Code]....
Test 15: fill up partition /usr/bin/time: cannot run diskfillerfunction: No such file or directory
I am obviously omitting (...) a lot of the code, but the relevant part is all there. How do I 'time' a function?
View 5 Replies
View Related
Mar 26, 2010
I wrote a spinner in Perl and when I did a spinner in shell I could just run the subroutine in the background.
[code]...
In Perl, how do you run a function in a background and get the PID for that? I know PID in Perl is $$
View 2 Replies
View Related
