Code:
#!/bin/ksh
(...)
# FILL UP PARTITION
diskfillerfunction () {
[Code]....
Test 15: fill up partition /usr/bin/time: cannot run diskfillerfunction: No such file or directory
I am obviously omitting (...) a lot of the code, but the relevant part is all there. How do I 'time' a function?
I am using Debian linux. I have 100 timers running. If a timer expired which will generate a signal and it was mapped to a same function handler. All the timers are mapped to one function handler. The problem is if the timer expires one at a time, the function handler called at a time. But if the 2 timers expires at a time, the function handler is called one time only instead 2 times. Is it possible to invoke the function handler as many times based on timer expirary happens simultaneoulsy?
View 14 Replies View RelatedCode:
#include <iostream>
using namespace std;
[code]...
I am doing some Linux kernel programming for my research project. I need to record the timestamp (by using cpuid and rdtsc) when an interrupt handler (top half) is first invoked. Due to the time critical nature of the problem itself, I have to do the timestamping inside the interrupt handler itself (the first operation when the handler is called). However, I understand that tasks that are not so time critical should be deferred to a tasklet function (bottom half) for processing because other interrupts are disabled in a (top-half) interrupt handler. I am currently out of idea on how I can pass the timestamp information that I have obtained in the interrupt handler to the corresponding tasklet function.
View 2 Replies View RelatedI want to declare a function in a function, but had no success till now, see the error code below and visit the project at sourceforge
[Code]...
I looked on the net for such function or example and didin't find anything, thus after having made one i guess it would be legitimate to drop it to see what others thinks of it.
#!/bin/bash
addelementtoarray()
{
local arrayname=$1
[code]....
I manage to use the function "time" and "localtime" in gcc.But while I used it in a module in kernel space the above 2 functions are giving error.Even in kernel space time.h header file is not identified. tell the similar time function which can be used in kernel space
View 1 Replies View RelatedWe are doing a project related to clock synchronisation. We have two laptops: Compaq and IBM Thinkpad. If we adjust the clocks of two laptops to same time in HH:MM:SS using datefunction, in about half an hour, both the clock drift by about 10-15 min We are wondering how this is possible???We have compiled kernel 2.6.36.2 on both laptops and set the value of HZ to 1000. Then what is the reason for such a significant drift in short interval of time??Is this related to crystal oscillator or anything else?
View 5 Replies View RelatedI have read a couple of articles on how dynamic linking works (those stuff about got, plt and lazy binding), and I am still not sure why you need to do dynamic linking in such a complicated way.Suppose your program uses a function in a shared library that needs to be linked dynamically at run time (like a printf). Why can't you statically decide the virtual address of the function at compile time? After all, all you need to do is to enter the page table entry corresponding to the address of the function if the library has been already loaded to a physical page frame.
View 3 Replies View Relatedfit a surface i.e. W(x,y) using svdfit() provided by "Numerical Recipes in C". svdfit() is written for curve fitting and not for surface fitting.But one can use svdfit(), as claimed by authors of NR book, to do surface fitting. On page 680 of NR book, authors have given a hint on how to use svdfit() for fitting a surface. But I have not understood it.This link may be helpful (Chapter 15 th is relevant here.):[URL]This is my problem:
Code:
I have a set of 100 numbers. I want to fit a 2-Dimensional function W(x,y) to these numbers.
[code]....
I am trying to get the time of my wall clock from my wireless driver in form of "hh:mm:ss", so I used the function get_rtc_time() inside my driver to get that and it was done. My question: Is it possible to increase the accuracy of this function, for example if I want to get the milliseconds and the Microseconds in additional to the first output? If not, Is there any other function can do that?
View 3 Replies View RelatedIs there a way to get the current time as provided from NTP (not the currently set time on the server)?
View 4 Replies View RelatedI am trying to set time using settimeofday in linux. But it sets local time. i.e works like SetLocalTime in windows. But I want to set system time(like SetSystemTime in windows). I could'nt find no other api in linux. What should i do? I had tried with mktime/gmtime apis
View 3 Replies View RelatedI have a question about calling an asm function from C....It doesn't work unless I create an asm variable to hold the value of the function in....Why?Here's the code that doesn't work...
asmfile.s - version one Code: .section .data
mydata: .ascii "this is the message!
.equ mylen, . - mydata
[code]...
I want to use backtrace() function to debug a crash issue. I tried this sample code to see how backtrace works. backtrace() function always returns 0 with the below code. Is there any kernel configuration that needs to be set for proper working of backtrace?
#include <execinfo.h>
#include <stdio.h>
#include <stdlib.h>
/* Obtain a backtrace and print it to stdout. */
void
print_trace (void)
[Code]...
Can you offer me the code about fmod() in C. I want to know how this function work, i am very interested in it because i have no idea to implement it, i want to know... how to write the function... not 'how to use the function' can anyone post the source codes of this function here?
View 6 Replies View Relatedi have an open source application that was developed in C++ (it uses objects and namespaces all over the place). I also have another application that was developed in C. Now i am trying to insert the code made in C into C++ application, but when i do that , i get this error on compilation of the source code:
Code:
error: 'mpi_init_vars' was not declared in this scope the function mpi_init_vars() is not part of object oriented programming and it doesn't belong to any scope, it was compiled into an object file and i am linking it with all objects of C++ application.
How can invoke the C function from C++ object oriented code?
I am trying to build a function inside a script.
Code:
#!/bin/sh
#System commands and other configurable.
IPT=/sbin/iptables
IP6T=/sbin/ip6tables
IPST=/usr/sbin/ipset
MODP=/sbin/modprobe
GET=/usr/bin/wget
INT_NET=192.168.1.0/24 .....
I can find lots of tutorials in how to use if, then, else. However, how do I define a variable inside the function?
SEE>>
Code:
for c in $ISO
Also, am I using the 'test' command correctly( -/+ week as valid test)?
I am doing a web site program and what I need is to call a C program in the PHP cloud.Do u think it would be possible? The web site would get the user input from PHP UI and pass to the C program , the C program would process the function with the user input and output the a PHP page.
View 2 Replies View RelatedI ask if a c++/c function is able to know its name from inside itself:
example:
Code:
int funct1(int a,b)
{
printf("%s ",funct_name());
}
or with a trick.
I wrote a spinner in Perl and when I did a spinner in shell I could just run the subroutine in the background.
[code]...
In Perl, how do you run a function in a background and get the PID for that? I know PID in Perl is $$
I know what is the functionality of the sleep() method.
for(i = 0; i < length; i++){
sleep(1000);
printf("%c
", message[i]);
}
Result :every print of the message will be takes 1000sec of gap but i want to know why wee need to use the Sleep function. where exactly it is useful
On this link [URL]4 a return type is defined
Code:
return ((unsigned int)(unsigned long)base & TBASE_DEFERRABLE_FLAG);
What is the above function returning.I am not clear with definition of what is being returned in the above code.
i want to compile function c in java and compile library is success.. when i call the library in java and error is :
Exception in thread "main" java.lang.UnsatisfiedLinkError: no libfunc.so in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1689)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1028)
[Code]....
In shell, I execute "./ffmpeg -f h264 - | xxx"
Now I hope use execl function to execute above operations,
I call execl("/bin/sh", "sh", "-c", "./ffmpeg -f h264 - | xxx");
but ffmpeg doesn't work, it seems that "|" pipe don't work.
how could I solve this?
I wrote some code in c, using pthread (I configured the linker and compiler in eclipse IDE first).
Code: #include <pthread.h>
#include "starter.h"
#include "UI.h"
Page* MM;
[Code]....
I tried to make a (very simple) function to put in my .bashrc file to make a local backup of a file, but when I call the function and try to use tab completion I get the following error: Code: cp: cannot stat `help': No such file or directory The function I added is as follows:
Code: function bk
{
cp -f --backup=numbered ${1} ${1}.bak
[code]....
I've an ELF file (exec)...I'm interested in getting a the function prototype of the "myfunc"...
View 9 Replies View RelatedThis is my file, named xxx.c. And there are two functions in it.
[code]...
When I try to compile the whole project, I used -ffunction-sections,-fdata-sections to generate the .o files, use Wl,--gc-sections -Wl,--print-gc-sections to link to the exacutable file. gcc 4.3.2 ld 2.18 Debian 5 After the first time I compiled it, I got a list of Removed functions. But one second later, I rememberd that I forget to close the Compile Switch: Debug. Then I had to recompile it and got another list. Compare these two lists, I found that , bxx isn't on the second list. First I guess that bxx is a debug function but never used in debug mode, and it won't be compiled in release mode. I check the source and find that there was no compile switch for bxx. But it's caller function axx, is removed, both the debug switch is on and off. I try to compiled the project for several times , but the result is the same. I can't realized it , why? Is that the --gc-sections won't remove all the functions not used?
I'm doing a script to make some task but I would like to know how can I do the part to check the bu.log ? Cause if the files exists it will send me an email with the log, but when the file doesnt exist it will send a blank emal that why i would like to 'check the file' and if there isnt will end it.
#!/bin/sh
x="$HOME/bu.log"
if [ $x ]; then #if the file exists will do
for file in *.log
[Code].....
How can I edit the funcion to check if there isnt an arq.log and close the script?