OpenSUSE :: Unable To Install Mumble 1.2.2
Feb 3, 2011
I'm having trouble installing Mumble 1.2.2. I'm running OpenSuse 11.3 (i586). I started by following the instructions provided on this page : BuildingLinux - Mumble I followed instruction to compile with GIT. I installed git-core with yast and then entered commands as specified in the referenced page.
The problem comes when I try to use the qmake command (qmake -recursive main.pro). I get a command not found message and after running (cnf qmake) here is the answer I get: The program qmake can be found in the following package: * libqt4-devel [ chemin : usr/bin/qmake, d�p�t : zypp 9repo-oss ] (My dist is french, "chemin" means "path" and "d�p�t" means "deposit", can you make sense of that?) So it appears that qmake is installed but I can't run it in terminal for some reason.
View 4 Replies
ADVERTISEMENT
Apr 10, 2011
A few days ago I decided to install mumble and create a mumble-server on my computer. So far the network requirements have been met, I have forwarded the necessary ports, etc.. etc... The only problem is mumble-server. As soon as I install it, if I restart my computer and run the terminal command
Code: $ murmurd The servers starts and the database (murmur.sqlite) and log (murmur.log) files are created. As for the ini file, I am able to specify an ini file found in my /home/MYUSERNAME directory, it will use that ini file. The server will be up, and me and my friends will be able to use it. I can kill the server and restart it without a problem. As soon as my computer is restarted, if i run the murmurd command this appears, whereas before nothing appeared unless i forced the server to stay attached to the terminal.
[Code]....
View 4 Replies
View Related
Jul 17, 2011
Basically, my middle mouse button (button 2) wasn't being detected by mumble when I was trying to enter a ptt key. The button itself was bound to do some weird copy-paste function, so I figured maybe that's why, so I rebound it to Shift+Right arrow using xbindkeys and xvkbd. I then went into mumble and it detected this no problem, however due to the xbindkeys config, when I press the middle mouse button it only does the bound function once.... i.e. I press it, it sends Shift+Right arrow to the X serv, but then stops, which is obviously useless for a push-to-talk button.
So, really what I am asking is, how should I go about sorting this? Is xbindkeys able to translate a keypress in sync with the mouse button (i.e if I hold the mouse button, it holds down the keys bound to it) or am I going down the wrong route and there is a better way to get middle mouse as my push to talk button on mumble. Perhaps a different keybind software?
View 1 Replies
View Related
Feb 1, 2010
who to install mumble 1.2 on slackware 13 i can't install, missing dependencies, tx. hola alguien sabe como instalar mumble 1.2 en slackware 13? no encuentro las dependencias, gracias
View 14 Replies
View Related
Jan 13, 2011
I have trouble with installing mumble-server.I found mumble-server-1.2.2-2.1.i386.rpmbuthttp://img502.imageshack.us/img502/3421/termm.jpg
View 2 Replies
View Related
Mar 15, 2011
I am just starting to use fedora as I'm on compsoc committee at my uni, and need to be able to use the server which runs it. Am trying to get a mumble server running (just on my laptop with a fedora 14 install) And am really struggling, can't get the stuff manually and do it, as it says it depends on some other packages which I can't find in the package manager, and if I just use the murmur package in the manager, then it doesn't seem to install, and even if it does, if I try to run it, it says the database is not writeable
[URL]
View 14 Replies
View Related
May 25, 2010
I am running Ubuntu 10.04 Desktop, and I'm pretty fed up with having to pay companies to host my Mumble server, while its something I could handle to do.But I just don't know how to do, nor what to do.Ive scowled the Internet for legit tutorial but nothing adds up.How can I host my own Mumble Server?Can somebody give me a detailed tutorial
View 9 Replies
View Related
Oct 31, 2015
i'm new to linux, and i want to create mumble servers for my friends.My first server is finished and he works but, is it possible to create multiples instances of mumble ?
View 1 Replies
View Related
Aug 1, 2010
I'm trying to set up my own mumble server, but I don't want to use the default port 64738, for security reasons. I've tried changing the lines:
Code:
# Port to bind TCP and UDP sockets to
port=64738
in the /etc/mumble-server.ini file to a port of my own choosing. However, it won't work unless I use port 64738. Is there anything I can do about this? Do I perhaps need to change something in ice (whatever that is)?
View 1 Replies
View Related
Mar 28, 2011
I used Mumble 1.2.2 for a while on my Slackware 13.1 system without any problems. After some time (before 1.2.3 was released) it suddenly stopped working. A few days ago, I wiped my disk and re-installed Slackware 13.1. Compiling 1.2.3 worked. Running it just stopped with a "FUTEX"-Error. I searched the source code for futex (with "-i" parameter) and didn't found anything. There were matches in the compiled object files. So, it's probably something with Qt.
Then I compiled Mumble 1.2.2 and run it. Worked. But it didn't find my microphone. I can hear everybody else but I cannot talk. I tried every device but there is no sound. If I activate the microphone in alsaconfig I can hear myself, so the microphone seems to work. A few minutes ago, I compiled Mumble 1.2.3. You know what? It runs without any "FUTEX_WAIT" error. But, the microphone does not work.
View 4 Replies
View Related
Sep 14, 2010
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies
View Related
Dec 16, 2010
Im not able to install the package mesa-32bit from this repository: Index of /repositories/X11:/XOrg/openSUSE_11.3. It tells me to make a huge change on architecture on many packages, plus downgrading mesa to 7.8.2 from 7.9 !
View 9 Replies
View Related
Apr 28, 2010
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies
View Related
Jan 22, 2010
on Suse linux 11.2 while trying to install sun webserver 7 I was unable to install it in graphical mode, is the any package that needs to be installed in order to do that
View 6 Replies
View Related
Jan 23, 2010
I'm trying to install my first linux system. I would like to use it as a server on an old 386 PC.For the internet connexion (ADSL) i use a Speedtouch USB modem.When i list the peripheral installed on the system, i see the modem with apparently a driver, but the device is listed as non classified. For me it should be directed to DSL0 but..According to some tuto i declared a DSL connection, ppp with ATM (VPI8 and VCI35).I launch the connection with pinternet but the connection failed.
View 4 Replies
View Related
Apr 6, 2011
I've successfully downloaded openSUSE-11.4(64-bit) ISO image from the openSUSE site,and burned the ISO image successfully into 2 DVD's separately using Nero(ver.7) But I am unable to boot up from the DVD. When I pop in the DVD into my DVD-writer,a few seconds go by with the blinking cursor,and eventually boots off to Windows.The BIOS setting of my machine has been enabled to boot from CD/DVD first before HDD. No error messages are shown while I try to boot. The burned ISO image file is O.K. as it gets successfully verified after writing on the DVD. The image file {openSUSE-11.4 (64-bit)}being 4.29GB in size
View 1 Replies
View Related
May 31, 2011
I am trying to setup HA for mySQL on SLES11sp1 with DRBD and heartbeat. I found the HAE of SLES seems has DRBD and SLES10 also have a older version. But after I installed SLES11 and also one SLES11sp1,both don't have DRBD. I downloaded a DRBD RPM for opensuse,it gave me glic error "need glic.so.64 bit",etc. When I tried to install those GLBIC stuff ,also errors for dependencies again. I tried to use the source
[Code]...
View 3 Replies
View Related
Jul 11, 2011
I have done a big big mistake (I could beat myself up for that) with my netbook and now I am sitting here, not getting openSUSE installed on it.
I wanted to try another netbook linux and installed (more by accident than intentionally) Easy Peasy Linux. This system is not bad, but cannot work with the wireless adapter in my netbook. However, I then wanted to install openSUSE 11.4 again, which ran fine on the netbook. But the install always gets stuck in different stages and I don´t know why.
Sometimes a failure message comes up: "filesystem is read only, rebooting in 120 seconds", but I am not really sure if this is for the harddrive or the usb stick. In other occasions, the bootprocess until install gets stuck at "starting KDM". Nothing happens then... thats it.
I already have reformatted the usb stick and copied the openSUSE Live CD via Imagewriter on it again... no success.
So now I am really confused, because I don´t know if there is something wrong with the harddrive? Or is it the stick itself? How can I find this out?
If it is the harddrive, how can I at least refomat it? Remember: no CD or DVD drive, just USB stick...
How can I find out if the image on the stick is ok? I already tested the install media and it said: "checksum ok"
View 9 Replies
View Related
Jan 22, 2010
I use openSuse 11.1 64 bit with FireFox and want to install Java.I go tho the Sun-site and have the choice between : two Linux RPM files and two non-RPM files. I can download them onto /usr/java Then I want to use the YAST-software installer, but I do not know how to install it from Sun nor to install it from the software-manager.
View 9 Replies
View Related
Mar 1, 2010
I downloaded the latest stable release from the opensuse download site and when I try to install it, it fails. Basically, the installation reaches 50% and then I get a message : Failed copying image file to hard disk. The hard disk on my PC is 18GB and the installer suggests 10.7 GB for /home and 7.2 GB for /root. I read somewhere that /root needs to be allocated a min of 10 GB, but the installer does not let me change the size /root to more that 7.2 GB. how can I go about installing it?
View 9 Replies
View Related
Jul 5, 2010
I just move to OpenSuse from Mandi 2010 - it's almost second day. I have been trying to install Bleem 3D but getting following error:
Subprocess failed. Error: RPM failed: rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_put: DB_RUNRECOVERY: Fatal error, run database recovery
[code]....
View 7 Replies
View Related
Aug 20, 2010
I am trying to install vim from suse repos, but it is giving me error
Code:
File './suse/i586/vim-base-7.2-23.1.i586.rpm' not found on medium [URL] Abort, retry, ignore? [a/r/i/?] (a): when I tried to open the url [URL] it is going to [URL]
View 1 Replies
View Related
Oct 25, 2010
I downloaded the DVD 32 bit and 64 bit as I have 2 machines, one 32 and one 64. After I burn the disks, I put the DVD in and run the check media. The 32 bit version says invalid checksums, cd is broken. I try to install and ever single checksum is invalid, not just one. But every file. The 64 bit says it has bad sectors in it. And will not install. I have tried re-downloading them. Tried burning them on computers. Tried different burning speeds. Nothing. Is this just bad files on the website, or is this all my computrs?
View 2 Replies
View Related
Feb 6, 2011
I'm installing Drupal 7.0 on an old 11.0 box.
However, I'm unable to install the php5-gd rpm due to a missing depency libt1.so.
View 1 Replies
View Related
Nov 11, 2010
I recently install opensuse 11.2 and I can't install R, I've tried to install it from the cran website and from the education repository without succed. Installing from the education repository creates a new folder in the root folder which contains R (or at least a think), but i can't execute it.
View 5 Replies
View Related
Feb 23, 2010
I'm running opensuse 11.2 KDE 64bit. I tried to install bluefish editor and it can't find it. I've installed in on many other distros. How do I install it in opensuse?
View 7 Replies
View Related
Mar 30, 2010
I am running opensuse 11.1
I would like to install some software from src saying "a_software_to_install" for example. Folowing documentation, that software is de-tare into a directory saying "a_software_to_install" for example. A third party software is necessary saying for instance "another-software.x.y.z-u.v" From that directory ( "a_software_to_install" ) you must run in that order
[Code].....
View 9 Replies
View Related
Jun 27, 2010
Automatic updates fail because:
PackageKit Error cannot-remove-system-package: Subprocess failed. Error: RPM failed: error: package libpackagekit-glib12-0.5.1-3.7.i586 is not installed
Manually updating from yaST gives the same error. However, I cannot find the above packge available for installation. i found the following link in the "Yast2-ncurses broken?" thread, but it doesnt automatically install, and I am unsure whether it will work with ver 11.2:
Index of /pub/gnu/ncurses
View 9 Replies
View Related
Jul 16, 2010
I just installed opensuse 11.3 freshly from opensuse-GNOME-livecd.I read about spideroak and trying to install it via zypper
View 3 Replies
View Related
Jul 22, 2010
Been unsuccessful in trying to install wine on my 11.3 KDE4 x86_64 system, from the Emulators:Wine/openSUSE_11.3 repo.
This is what my zypper throws up:
Code:
Installing: wine-32bit-1.2-4.1 [error]
Installation of wine-32bit-1.2-4.1 failed:
(with --nodeps --force) Error: Subprocess failed. Error: RPM failed: error:
[Code].....
View 9 Replies
View Related
