I have the following problem with xterm on vnc on opensuse 11.4. I start a vncserver, and then inside that session I start xterm. However, if the xterm emits a beep/bel/ascii 7 then the sound comes out on the machine on which the *server* is running. Every other installation I've used has the sound come out on the viewer end (which is what you'd expect and want).
View 4 RepliesIn order to make alt key works in vim in xterm (I set metaSendEscape in order to make other application works well), I put this in .vimrc:
for i in range(65, 90) + range(97, 122)
exe "set <M-".nr2char(i).">=<Esc>".nr2char(i)
endfor
set ttimeoutlen=50
But the vim will beep (and do some strange thing) after starts. (In urxvt there is no problem). I use binary search to find that it is i = 80 cause the problem. If I just only put "set <M-P>=^[P" in vimrc(^[ is Ctrl-V <ESC>). Xterm also will beep. (Only P will) It is really a weird behavior. The thing which is weirder is if you directly run ":<M-P>=^[P" there is no problem. It only occur when this line is in vimrc.
When I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.
I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.
This may seem like a stupid question (if not completely ridiculous ), but I was wondering if there's a way to configure audio events so that I can use a wav/ogg sound instead of the PC speaker's default beep for small events like hitting backspace in a text editor when it's the beginning of the document (or any other illegal keyboard action), or in Wine applications when it calls for an "asterisk" sound (it just beeps the PC speaker).
I've looked at similar threads, but they mainly just talk about either the beeps that the machine does when it boots up, or simply turning off the beeping completely. What I want to do is substitute the beeps (that are caused by the OS) for an actual sound that's played through the ALSA/OSS/whatever audio device.
I wrote a c console-programme with should output a system beep.But I cannot hear any sound.Which setting of Ubuntu avoid the beep.
View 2 Replies View Relatedjust installed Lucid 64-bit. everything running smoothly including the sound except no system beep from PC speaker. system beep is enabled in system -> preferences -> sound. What else can I try? I'm dual booting with Hardy and system beep works fine in Hardy.
View 4 Replies View RelatedI tried to follow the instruction here: [URL]. But I failed at step 3 because there is no dropdown box on the linked page. One test command I found online returns errors:
cat /dev/sndstat
Sound Driver:3.8.1a-980706 (ALSA v1.0.20 emulation code)
Kernel: Linux mary 2.6.30-bpo.2-686 #1 SMP Fri Dec 11 18:12:58 UTC 2009 i686
Config options: 0
Installed drivers:
Type 10: ALSA emulation
Card config:
HDA Intel at 0xf3300000 irq 22
Audio devices: NOT ENABLED IN CONFIG
Synth devices: NOT ENABLED IN CONFIG
Midi devices: NOT ENABLED IN CONFIG
Timers:
7: system timer
Mixers: NOT ENABLED IN CONFIG
I've been using my girlfriend's Mackbook Pro and really like the beep sound when pressing backspace at a command prompt and really would like to have it on my ubuntu. However, I've checked "Terminal bell" option in the profile settings, but there is still no beep sound. What am I missing here?
View 7 Replies View RelatedCode handy which could play a beep/alert sound when somebody (any user) joins your LAN. Or as second-hand choice, if this is too hard, to play a beep when X terminal windows writes some output lines.
View 2 Replies View Relatedok so a while ago i updated ubuntu and the sound stopped working. i cant hear anything now not even a system beep - i tried the Comprehensive Sound Problem Solutions Guide by LordRaiden but to no success. i tried alsamixer and all that to check its muted, and its not.
View 3 Replies View RelatedI need to make beep sound inside my basic shell script. code...
View 5 Replies View RelatedI have a Macbook 5,2, on which I'm triple booting OS X - Linux - Windows, using bootcamp and rEFIt.I had a variation of Ubuntu 10.04 called Uber Student as the linux installation.I installed Ubuntu 11.04 AMD64 instead, by choosing the EFI boot option.Now this gave me some problems. When I shot down, the Macbook gives me a troubling long beep sound.When I start up, I'm still able to boot up into rEFIt and Grub2, but there is a big delay with the screen being black for about 30 seconds and the little white light in the left corner of the Macbook is blinking feverishly. I read something about a guy which had a similar problem and the process seemed to mess up the firmware on his Macbook, so he had to have his MB changed.
What's up with the scary beep sound and the long boot up delay?Secondly, when I want to do an update of the Ubuntu system, the update manager asks me to do a partial upgrade, which includes removing the grub-EFI, resulting in a system that won't boot...
As you know,whenever user turns the PC on,a beep sound is heard,then the bios starts,but recently this beep sound doesn,t come out of the case,and,so the bios does not start(nothing seen on the screen),then i have to hard reboot several times,and mostly,i have to shut down for some seconds to remove this problem,also sometimes this beep sound comes out but repeatedly for many times.
I am suspicious about the shut down button,because it,s a long time that this button usually is blinking.
-What is the reason for this problem?
-Is that related to hardware or software?
This is a thread I've moved over from the install forum and is hopefully more focused. Sorry if I have violated some protocol. Problem I have a new machine build configured to dual-boot Windows 7 and OPENSUSE 11.4. Network performance in Windows is very good but network performance in OPENSUSE is very poor.
[Code]...
I have a normal computer installed (F14, 32 bits) with a sound card correctly installed. In a normal configuration into runlevel 5, I can play sound and the sound card is visible from the gnome-volume-control window.
I should modify the computer running a naked X server (without window manager and other stuff) and two applications (an xterm and a special application managing sounds). The last application is a text based application and could run on a text console. I have the X server running because I display picture sent from another computer. Currently the computer boots on runlevel 3 and logs in automatically. If I start manually my special application, it runs fine. I create a .xinitrc script with the xterm command and I change the .bashrc calling xinit. Each application runs well independently. My problem is when I try running my special sound application from the xterm window. I have no sound. If a run the gnome-volume-control command, the program shows that no sound card is available.
I suppose the X server removes the original sound configuration of the text mode during its initialization and could not initialize correctly after that the sound card.
how it is possible to initialize the sound card manually into the X server? Do I need running some gnome command before I can call my application?
I installed OpenSuSE 11.3. The only "extra" package I put in after the install was VirtualBox-ose. The firewall is disabled. I gave the machine a static IP address. I can get to the Internet from the machine. I enabled sshd to start on boot with "chkconfig sshd on" and also verified the service is running on the machine. I can ssh user@localhost from the machine as well.
When I try to connect to SSH from another machine, I get a connection refused. I verify that the firewall is down. I also try to get to VNC -- same problem: Connection refused. I ping the machine for fun. If I try to SSH again, it sometimes gives me a logon? I would check the server logs for the connection refused, but I wouldn't know where to look. I started in /var/log/messages, but nothing seemed to jump out there. I also find it strange because I can RDP to a windows guest running under VirtualBox. The Windows guest uses Bridged Network and DHCP.
I also find it interesting that I sometimes type a "ping google.com" from the 11.3 box and it will just hang - no output. Then I open firefox and get to the internet. All of a sudden, ping starts to give output. Could this be a neetwork card issue? A configuration issue? I don't know where to start.
Recently loaded 11.3 onto a virtual machine, however none of the network settings will allow me to connect to the internet. First time Ive had this happen, other distro's Ive experimented with connected with no problems. I recall seeing a similar topic some time ago (dont remember if it was here or another forum), but at the time, there had been no fix. Anyone know if this has been fixed?
View 5 Replies View Relatedso I recently got Vegastrike working after some toils with XTERM not loading. Now I purposefully changed the resolution too high so that the game would error out so that I could show you the sound bug. I do know that if I lower my resolution it will function, but I get no sound, no music, not even system beeps. I believe it's tied to one line of code, but being a total newb in linux I haven't figured out what I need to do to fix it.
[Code]...
I found somewhere that it was saying I had the wrong sound card when I have a realtek on my motherboard and it asked me to edit a file in the root directory, which I did, however it doesn't seem to help the issue. I'm totally stumped as to what the hell I need to do to get sound. Game looks amazing, but with no sound it's sorta worthless right at the moment.
How do I can do to make the virtual machine with virtualbox has more sound?
View 2 Replies View RelatedHow might i be able to play a small blip/beep sound to let me hear/test the audio levels upon volume change? Mac OSX users may know what I'm talking about. I had a similar application in windows. It helps me guage my volumes before i play games/...../videos.
View 3 Replies View RelatedFirst off How do you disable IPV6 access on all connections used on the pc-is there a way to test for ipv6 connectivity?
Secondly how secure is a default opensuse 11.04 machine out of the box? should i be making some changes to the default configuration?
Thirdly what does the default firewall settings do? on my network i use my wpa2 psk aes connection via my local wireless network-in the event that some can hack into my wireless would the opensuse firewall prevent direct access to my pc from a attacker on the same wireless subnet?
Fourthly when does opensuse 11.04 go out of date? in a year from now?
Start xpdf or gv. Click an xterm to be active and slide it over xpdf/gv. Vertical lines from xpdf/gv under the xterm stick to the xterm window above and make it unreadable.
The problem does NOT show with KDE default settings with display effects on but does show in fvwm, xfce etc, and in KDE without effects.
On a system with a Sandy Bridge integrated graphics (i5-2400) the problem went away by downgrading to xf86-video-intel-2.13.0. But it was not enough for another system with 945G which needed downgrading to xf86-video-intel-2.12.0.
i have fluxbox and i need to know how to copy things in xterm and paste them outside of xterm.
View 2 Replies View RelatedI had an OS 11.3 machine running as an Nis server with Nfs, also providing dns, squid, samba shares and running apache
Internet connection provided by a netgear router at 192.168.0.1, server at 192.168.0.2, clients at 192.168.0.3, 192.168.0.4, etc. The clients all being configured to use the server for dns the squid running on it for their proxy, logging on with Nis using the exported server's Nfs /home share as /home on the clients
Everything was setup through Yast with some conf file editing being done later for samba and apache and all working brilliantly
Until ...
I added another network card to the server machine and set it up as a router, where they will be placed once ready the router providing the internet connection doesn't have gigabit ethernet
So I figured if I had gigabit cards in the clients and a gigabit card in the server set up for the internal zone and providing routing, then the clients using it as their router the local stuff would be more responsive, especially as they are using an nfs share for /home
I set the clients up to use the server at 192.168.1.1 for their router and changing their own local ip addresses to suit, i.e. 192.168.1.2, 192.168.1.3 etc and rebooted
Nis and nfs were no longer working, so I logged on as the local user, ecky, who's home directory isn't in the nfs share but at /ecky, the internet connection worked fine and so did everything else, dns, proxy, etc
I tried changing the nfs share and nis server to the internal card's ip, 192.168.1.1 and that didn't work either
Samba shares work at both 192.168.0.2 and 192.168.1.1, so my problem is that nis logons and nfs mounts don't work from either address
I've tried to give as much info as possible on what I've done without being too confusing ... don't know whether I succeeded
Darned annoying cos it took me a day and a half to get the gigabit card to detect properly in one of the machines...
I have three machines with the same configuration. ssh and SFTP enabled on all three and I can see all three from the network. I can also ping all three. Here is what I get with the ssh debug command on the problematic machine:
linux-csp7:/home/ines # ssh -vvv ines@192.168.2.19
OpenSSH_5.2p1, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
[Code].....
I have had a notebook with an ethernet plugged in cable before, sent a signal through the cable by resetting my router, and it switched my notebook on from cold. My question is, is there a way of doing this using a remote desktop client. Ideally, I would like a machine switched off at home running suse linux/windows, then have a client computer sent the remote request, this in turn activates the machine, which boots and then gives the rmote client control.
View 4 Replies View RelatedSo here is what I am trying to do. I want to connect my Open Suse 11 machine to the internet. I am almost there.
1. I configured my network card and eth0 is up.
2. I configured my DSL with user name and password and I am authenticated.
3. An IP address is assigned to me and the DNS servers are retrieved.
However I cannot ping or visit any website I use the YAST automatic configuration and kinternet to connect. Here are the gritty details
[Code]...
I do see that kinternet has trouble reading /etc/resolv.conf. It says 'permission denied' although read permissions are set on both /sbin/route and the path that it links to. This should not matter however since the existing entries are already there and valid. I also tried to turn off the firewall suspecting it could be a problem.
So I am being authenticated successfully ( verified with the logs ); assigned an IP; the route seems ok; firewall seems ok. But I cannot browse or do internet things I have been tweaking settings for 3 days now and all seems in vain. Do enlighten me on what I am doing wrong. I bet its something silly that I overlooked. I have had success configuring the same thing in red hat linux and browsing the internet without trouble. Is there something OpenSuse specific that I am missing ?
I am starting a MCSE course and part of it is to create and configure a domain etc etc I have done this and all my windows XP and 7 machines on my LAN are now functioning as part of the domain just great.
Unfortuntely, I have several Open suse machines which are currently not part of the domain yet (they are in a basic Workgroup).
get these computers onto the domain so that a user can log on using their domain credentials and I can apply security policies and what not?
regarding a remote connection from my workplace to my home system. On my home a have a connection to the ISP and the provider is allocating a dynamic IP to my router. How can I connect from my work computer to the home computer? There are other application or other stuff for making this possible?
View 5 Replies View RelatedI have been working on this for about 4 hours so I am extremely frustrated. I am trying to access windows shares from my linux box. I will worry about getting my own data shared afterwards.
I was having the authentication problem described by swerdna's sticky, and it was solved by the upgrade. However apparently that is not the main problem. samba is trying to use my ISP's DNS to resolve the internal network names. I have a vague conceptual understanding of WINS and NetBIOS - but Windows does this without any extra steps. Do I need to configure my machine to also act as a WINS? how do I do that? In my searches I found a thread about "why do windows to linux users give up?" this is why.